On Sunday, January 28, 2024 at 12:02:51 PM UTC-5 ken.r...@gmail.com wrote:
Hi Matt, When I point the web browser at the hub, I only see 4 sensors, but I've always only seen 4 sensors even when all 6 were working. Wireshark shows traffic from 5 of the 6 sensors, there's nothing from this 6th sensor and nothing from an unknown sensor ID. I don't have a 433MHz transceiver so I can't tell what the sensor is sending to the hub. The 433MHz repeater flickers when it transmits (and the other 5 sensors are switched off) so I know it's transmitting something to the hub, but the hub isn't sending anything on to Weeex from it. ken, i'm out of ideas. maybe try only one at a time of the two identical sensors, 5 and 6? do that also with the first 4 identical sensors. enumerate the sensor ids to make sure you not missing something? it sounds like the sensor 6 is transmitting, but we do not know whether the hub is receiving. as i recall, the hub never mixes data from multiple sensors; each http request it makes is for a separate sensor. so you should be able to have two sensors reporting pressure, and you just have to distinguish those in weewx based on the sensor identifier. m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a099987a-d6d9-439d-a449-4a7556e344a7n%40googlegroups.com.
