Hi Matt, When I point the web browser at the hub, I only see 4 sensors, but I've always only seen 4 sensors even when all 6 were working.
Wireshark shows traffic from 5 of the 6 sensors, there's nothing from this 6th sensor and nothing from an unknown sensor ID. I don't have a 433MHz transceiver so I can't tell what the sensor is sending to the hub. The 433MHz repeater flickers when it transmits (and the other 5 sensors are switched off) so I know it's transmitting something to the hub, but the hub isn't sending anything on to Weeex from it. Regards, Ken. On Sunday 28 January 2024 at 02:34:38 UTC+1 matthew wall wrote: > ken, > > what do you see when you point a web browser at the hub? are all of your > sensors listed? > > check everything. watch the http requests from the hub to the machine > running weewx (use tcpdump, or wireshark, or turn up the verbosity in the > interceptor). see which sensors are in the requests, see which ones are > not. find out if the missing sensor is being reported by the hub but not > received by weewx. or not even being reported by the hub. > > m > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e12aba85-8880-4058-a6a4-89d4562f10ban%40googlegroups.com.
