Der Befehl lsusb gibt folgende Angaben: Bus 002 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub *Bus 001 Device 003: ID 0557:2008 ATEN International Co., Ltd UC-232A Serial Port [pl2303]* Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Beim Aus- und wieder Einstecken erhalte ich in dmesg diese Angaben: [ 137.795913] usb 1-1.3: USB disconnect, device number 3 [ 137.796272] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 137.796319] pl2303 1-1.3:1.0: device disconnected [ 140.929549] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd [ 141.033597] usb 1-1.3: New USB device found, idVendor=0557, idProduct=2008, bcdDevice= 0.01 [ 141.033631] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 141.038414] pl2303 1-1.3:1.0: pl2303 converter detected [ 141.048247] usb 1-1.3: pl2303 converter now attached to ttyUSB0 vince schrieb am Montag, 14. August 2023 um 19:12:42 UTC+2: > I would unplug the USB and plug it back in. Use the 'dmesg' command to > see if it sees the device being unplugged and re-plugged. > > Use the 'lsusb' command to see what is connected to your pi. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/cdb3a316-2566-4f14-9862-ceaadae48e4bn%40googlegroups.com.
