Thanks All, I got it going. I still have to remap out some data inputs as I do not have some of the default (expected) sensors. You guys are a big help. I should not have picked up on the other driver, as i was even using the old ecowitt driver on the old system. I'll be Down Under in a few months. If we meet up first rounds on me. Thanks again.
On Thursday, November 17, 2022 at 6:45:07 PM UTC-7 gjr80 wrote: > Sorry, no internet access this morning. > > As suggested in the earlier posts your issue has nothing to do with the > Ecowitt Gateway driver (aka the GW100 driver), but rather the issue is in > the AddEcowittData service in ecowitt.py. tempf is typically the outside > temperature field used in Ecowitt and WU format messages. I'm guessing your > lack of an outdoor temperature sensor is causing your Ecowitt gateway to > omit the tempf field in these messages and the AddEcowittData service > cannot tolerate this omission. The issue needs to be taken up with the > author of the AddEcowittData service. > > I'm not sure what your configuration/use case is, but if you are trying to > use two different services/drivers to populate WeeWX with data from a > single Ecowitt Gateway device I suspect you are playing with fire. Unless > you have specific requirements my suggestion would be to pick one as a > driver and stick with that. > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b4e2f62a-11b2-44b5-83e0-02c32fa5f4ben%40googlegroups.com.
