On 18/11/2022, Bob Rose <rose032...@gmail.com> wrote: > Glen, During the initial install I did not see a option for the > ecowitt/gw1000. After the install I found : Add Ecowitt Data to WeeWX > (cougar.eu.com) > <https://www.cougar.eu.com/useful-guides/weewx-guides/rasberry-pi/add-ecowitt/modify-weewx.html>.
Yes. That's Mike Revitt's site so that would match his driver (mentioned previously) which does indeed use tempf for ExtraTemp2 > And used that. So, I probably have it all wrong. Yep. Mixing instructions, like drinks; never ends well! If you are using Gary's GW1000 driver then follow his instructions. I note that he has a wiki with the driver so it should be very well documented. https://github.com/gjr80/weewx-gw1000/wiki And if it's not - I'm sure he would appreciate a heads up as I have no doubt he would fix / clarify it. > On Thursday, November 17, 2022 at 5:39:43 PM UTC-7 Glenn McKechnie wrote: > >> Agree with Vince; but... >> >> Where does the file /usr/share/weewx/user/ecowitt.py come from? >> >> It's not in the driver that weewx reports as >> user.gw1000: GatewayDriver: version is 0.5.0b5 >> >> The ecowitt.py drivers I tripped over don't sync with the line 44 >> number but there is a tempf in ... >> >> https://github.com/MRevitt/Weewx/blob/8cb89587017ecb87419a384b68647850b1a50c7f/bin/user/ecowitt.py >> >> and a temp2f in >> >> https://github.com/MRevitt/Weewx/blob/8cb89587017ecb87419a384b68647850b1a50c7f/bin/user/ecowitt.py >> >> Have you configured the GW1000 driver or used an old setup - ie; >> different driver. >> >> You also mention reusing an old database - ExtraTemp2 was tempf under >> the MRevitt driver - do you need to rename that field? >> >> Yes, Questions with no real answers. >> Only you or Gary will have the answers ;-) >> >> I'll go now. -- Cheers Glenn rorpi - read only raspberry pi & various weewx addons https://github.com/glennmckechnie -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAAraAzig%2BdTxsq_z7S5P2N7KS_Zp2C%2BcLELXvZ%3DA%2Bypy6wR-mg%40mail.gmail.com.
