Thank you for the link. I wish I would have asked sooner. It was maddening trying to solve! Pulling the power didn't work, but clearing the memory did.
Thanks again. On Wednesday, April 6, 2022 at 5:05:58 PM UTC-7 [email protected] wrote: > Yes. > > A large number of pages to be retrieved, followed immediately by... > nothing. > > On Wed, Apr 6, 2022 at 4:39 PM vince <[email protected]> wrote: > >> Tom - this one always confuses me so I thought I'd ask - are you basing >> that on these lines in the log ? >> >> Apr 6 15:24:09 honeybucket weewx[813] DEBUG weewx.drivers.vantage: >> Getting archive packets since 2022-03-13 03:00:00 PDT (1647165600) >> Apr 6 15:24:09 honeybucket weewx[813] DEBUG weewx.drivers.vantage: >> Gentle wake up of console successful >> Apr 6 15:24:09 honeybucket weewx[813] DEBUG weewx.manager: Daily summary >> version is 1.0 >> Apr 6 15:24:10 honeybucket weewx[813] DEBUG weewx.drivers.vantage: >> Retrieving 513 page(s); starting index= 1 >> Apr 6 15:24:10 honeybucket weewx[813] DEBUG weewx.drivers.vantage: >> DMPAFT complete: page timestamp 2022-02-12 06:30:00 PST (1644676200) less >> than final timestamp 2022-03-13 03:00:00 PDT (1647165600) >> Apr 6 15:24:10 honeybucket weewx[813] DEBUG weewx.drivers.vantage: Catch >> up complete. >> >> >> >> On Wednesday, April 6, 2022 at 4:05:43 PM UTC-7 Tom Keffer wrote: >> >>> Clear cut case of corrupted memory in the logger. See the wiki article >>> *WeeWX >>> generates HTML pages, but it does not update them >>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#weewx-generates-html-pages-but-it-does-not-update-them>* >>> >>> On Wed, Apr 6, 2022 at 4:01 PM Jeremiah <[email protected]> wrote: >>> >>>> As the subject says, nearly five years to the day, data quit archiving. >>>> It is no longer written to MySQL or Wunderground. In an effort to fix this >>>> I have: rebooted, disconnected and reconnected the usb cable to the data >>>> collector, upgraded weewx, uninstall (purge) and reinstall, and created a >>>> new conf file. If I run weewxd from the cli, I can see the data coming in >>>> and verified it's current. I have verified the connection to MySQL. I'm >>>> out >>>> of good ideas. Thanks for your assistance! >>>> >>>> >>>> >>>> Log file with debug=2 attached with about 13 minutes of data. >>>> >>>> Here is some info from wee_debug: >>>> >>>> >>>> >>>> Using verbosity=1, displaying most info >>>> >>>> >>>> >>>> wee_debug output will be sent to stdout(console) >>>> >>>> >>>> >>>> Using configuration file /etc/weewx/weewx.conf >>>> >>>> Using database binding 'wx_binding', which is bound to database >>>> 'archive_mysql' >>>> >>>> >>>> >>>> System info >>>> >>>> Platform: Linux-5.10.103-v7+-armv7l-with-debian-10.12 >>>> >>>> Python Version: 3.7.3 >>>> >>>> >>>> >>>> Load Information >>>> >>>> 1 minute load average: 0.80 >>>> >>>> 5 minute load average: 0.68 >>>> >>>> 15 minute load average: 0.70 >>>> >>>> >>>> >>>> General Weewx info >>>> >>>> Weewx version 4.7.0 detected. >>>> >>>> >>>> >>>> Station info >>>> >>>> Station type: Vantage >>>> >>>> Driver: weewx.drivers.vantage >>>> >>>> >>>> >>>> Driver info >>>> >>>> [Vantage] >>>> >>>> # This section is for the Davis Vantage series of weather stations. >>>> >>>> >>>> >>>> # Connection type: serial or ethernet >>>> >>>> # serial (the classic VantagePro) >>>> >>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>>> >>>> type = serial >>>> >>>> >>>> >>>> # If the connection type is serial, a port must be specified: >>>> >>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>>> >>>> # /dev/ttyUSB0 is a common USB port name >>>> >>>> # /dev/ttyS0 is a common serial port name >>>> >>>> # BSD: >>>> >>>> # /dev/cuaU0 is a common serial port name >>>> >>>> port = /dev/ttyUSB0 >>>> >>>> >>>> >>>> # If the connection type is ethernet, an IP Address/hostname is >>>> required: >>>> >>>> host = 1.2.3.4 >>>> >>>> >>>> >>>> ###################################################### >>>> >>>> # The rest of this section rarely needs any attention. >>>> >>>> # You can safely leave it "as is." >>>> >>>> ###################################################### >>>> >>>> >>>> >>>> # Serial baud rate (usually 19200) >>>> >>>> baudrate = 19200 >>>> >>>> >>>> >>>> # TCP port (when using the WeatherLinkIP) >>>> >>>> tcp_port = 22222 >>>> >>>> >>>> >>>> # TCP send delay (when using the WeatherLinkIP): >>>> >>>> tcp_send_delay = 0.5 >>>> >>>> >>>> >>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >>>> >>>> loop_request = 1 >>>> >>>> >>>> >>>> # The id of your ISS station (usually 1). If you use a wind meter >>>> connected >>>> >>>> # to a anemometer transmitter kit, use its id >>>> >>>> iss_id = 1 >>>> >>>> >>>> >>>> # How long to wait for a response from the station before giving up >>>> (in >>>> >>>> # seconds; must be greater than 2) >>>> >>>> timeout = 4 >>>> >>>> >>>> >>>> # How long to wait before trying again (in seconds) >>>> >>>> wait_before_retry = 1.2 >>>> >>>> >>>> >>>> # How many times to try before giving up: >>>> >>>> max_tries = 4 >>>> >>>> >>>> >>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>>> >>>> model_type = 2 >>>> >>>> >>>> >>>> # The driver to use: >>>> >>>> driver = weewx.drivers.vantage >>>> >>>> >>>> >>>> Currently installed extensions >>>> >>>> No extensions installed >>>> >>>> >>>> >>>> Archive info >>>> >>>> Database name: weewx >>>> >>>> Table name: archive >>>> >>>> Version 1.0 >>>> >>>> Unit system: 1 (US) >>>> >>>> First good timestamp: 2017-03-09 19:00:00 PST (1489114800) >>>> >>>> Last good timestamp: 2022-03-13 03:00:00 PDT (1647165600) >>>> >>>> Number of records: 87129 >>>> >>>> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >>>> >>>> The station hardware was not interrogated in determining archive >>>> interval. >>>> >>>> >>>> >>>> Databases configured in weewx.conf >>>> >>>> Database name: weewx.sdb >>>> >>>> Database driver: weedb.sqlite >>>> >>>> >>>> >>>> Database name: weewx >>>> >>>> Database driver: weedb.mysql >>>> >>>> Database host: 192.168.1.17 >>>> >>>> >>>> >>>> >>>> >>>> Parsed and obfuscated weewx.conf >>>> >>>> # WEEWX CONFIGURATION FILE >>>> >>>> # >>>> >>>> # Copyright (c) 2009-2021 Tom Keffer <[email protected]> >>>> >>>> # See the file LICENSE.txt for your rights. >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section is for general configuration information. >>>> >>>> >>>> >>>> # Set to 1 for extra debug info, otherwise comment it out or set to zero >>>> >>>> debug = 2 >>>> >>>> >>>> >>>> # Root directory of the weewx data file hierarchy for this station >>>> >>>> WEEWX_ROOT = / >>>> >>>> >>>> >>>> # Whether to log successful operations >>>> >>>> log_success = True >>>> >>>> >>>> >>>> # Whether to log unsuccessful operations >>>> >>>> log_failure = True >>>> >>>> >>>> >>>> # How long to wait before timing out a socket (FTP, HTTP) connection >>>> >>>> socket_timeout = 20 >>>> >>>> >>>> >>>> # Do not modify this. It is used when installing and updating weewx. >>>> >>>> version = 4.7.0 >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section is for information about the station. >>>> >>>> >>>> >>>> [Station] >>>> >>>> >>>> >>>> # removed >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> [Vantage] >>>> >>>> # This section is for the Davis Vantage series of weather stations. >>>> >>>> >>>> >>>> # Connection type: serial or ethernet >>>> >>>> # serial (the classic VantagePro) >>>> >>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>>> >>>> type = serial >>>> >>>> >>>> >>>> # If the connection type is serial, a port must be specified: >>>> >>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>>> >>>> # /dev/ttyUSB0 is a common USB port name >>>> >>>> # /dev/ttyS0 is a common serial port name >>>> >>>> # BSD: >>>> >>>> # /dev/cuaU0 is a common serial port name >>>> >>>> port = /dev/ttyUSB0 >>>> >>>> >>>> >>>> # If the connection type is ethernet, an IP Address/hostname is >>>> required: >>>> >>>> host = 1.2.3.4 >>>> >>>> >>>> >>>> ###################################################### >>>> >>>> # The rest of this section rarely needs any attention. >>>> >>>> # You can safely leave it "as is." >>>> >>>> ###################################################### >>>> >>>> >>>> >>>> # Serial baud rate (usually 19200) >>>> >>>> baudrate = 19200 >>>> >>>> >>>> >>>> # TCP port (when using the WeatherLinkIP) >>>> >>>> tcp_port = 22222 >>>> >>>> >>>> >>>> # TCP send delay (when using the WeatherLinkIP): >>>> >>>> tcp_send_delay = 0.5 >>>> >>>> >>>> >>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >>>> >>>> loop_request = 1 >>>> >>>> >>>> >>>> # The id of your ISS station (usually 1). If you use a wind meter >>>> connected >>>> >>>> # to a anemometer transmitter kit, use its id >>>> >>>> iss_id = 1 >>>> >>>> >>>> >>>> # How long to wait for a response from the station before giving up >>>> (in >>>> >>>> # seconds; must be greater than 2) >>>> >>>> timeout = 4 >>>> >>>> >>>> >>>> # How long to wait before trying again (in seconds) >>>> >>>> wait_before_retry = 1.2 >>>> >>>> >>>> >>>> # How many times to try before giving up: >>>> >>>> max_tries = 4 >>>> >>>> >>>> >>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>>> >>>> model_type = 2 >>>> >>>> >>>> >>>> # The driver to use: >>>> >>>> driver = weewx.drivers.vantage >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section is for uploading data to Internet sites >>>> >>>> >>>> >>>> [StdRESTful] >>>> >>>> [[Wunderground]] >>>> >>>> # This section is for configuring posts to the Weather >>>> Underground. >>>> >>>> >>>> >>>> # If you wish to post to the Weather Underground, set the >>>> option 'enable' to true, then >>>> >>>> # specify a station (e.g., 'KORHOODR3') and password. To guard >>>> against parsing errors, put >>>> >>>> # the password in quotes. >>>> >>>> enable = true >>>> >>>> station = XXX obfuscated by wee_debug XXX >>>> >>>> password = XXX obfuscated by wee_debug XXX >>>> >>>> >>>> >>>> # If you plan on using wunderfixer, set the following >>>> >>>> # to your API key: >>>> >>>> api_key = XXX obfuscated by wee_debug XXX >>>> >>>> >>>> >>>> # Set the following to True to have weewx use the WU "Rapidfire" >>>> >>>> # protocol. Not all hardware can support it. See the User's >>>> Guide. >>>> >>>> rapidfire = False >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section specifies what reports, using which skins, to generate. >>>> >>>> >>>> >>>> [StdReport] >>>> >>>> >>>> >>>> # Where the skins reside, relative to WEEWX_ROOT >>>> >>>> SKIN_ROOT = /etc/weewx/skins >>>> >>>> >>>> >>>> # Where the generated reports should go, relative to WEEWX_ROOT >>>> >>>> HTML_ROOT = /var/www/html/weewx >>>> >>>> >>>> >>>> # The database binding indicates which data should be used in >>>> reports. >>>> >>>> data_binding = wx_binding >>>> >>>> >>>> >>>> # Whether to log a successful operation >>>> >>>> log_success = True >>>> >>>> >>>> >>>> # Whether to log an unsuccessful operation >>>> >>>> log_failure = True >>>> >>>> >>>> >>>> # Each of the following subsections defines a report that will be >>>> run. >>>> >>>> # See the customizing guide to change the units, plot types and line >>>> >>>> # colors, modify the fonts, display additional sensor data, and >>>> other >>>> >>>> # customizations. Many of those changes can be made here by >>>> overriding >>>> >>>> # parameters, or by modifying templates within the skin itself. >>>> >>>> >>>> >>>> [[SeasonsReport]] >>>> >>>> # The SeasonsReport uses the 'Seasons' skin, which contains the >>>> >>>> # images, templates and plots for the report. >>>> >>>> skin = Seasons >>>> >>>> enable = true >>>> >>>> >>>> >>>> [[SmartphoneReport]] >>>> >>>> # The SmartphoneReport uses the 'Smartphone' skin, and the >>>> images and >>>> >>>> # files are placed in a dedicated subdirectory. >>>> >>>> skin = Smartphone >>>> >>>> enable = false >>>> >>>> HTML_ROOT = /var/www/html/weewx/smartphone >>>> >>>> >>>> >>>> [[MobileReport]] >>>> >>>> # The MobileReport uses the 'Mobile' skin, and the images and >>>> files >>>> >>>> # are placed in a dedicated subdirectory. >>>> >>>> skin = Mobile >>>> >>>> enable = false >>>> >>>> HTML_ROOT = /var/www/html/weewx/mobile >>>> >>>> >>>> >>>> [[StandardReport]] >>>> >>>> # This is the old "Standard" skin. By default, it is not >>>> enabled. >>>> >>>> skin = Standard >>>> >>>> enable = false >>>> >>>> >>>> >>>> [[FTP]] >>>> >>>> # FTP'ing the results to a webserver is treated as just another >>>> report, >>>> >>>> # albeit one with an unusual report generator! >>>> >>>> skin = Ftp >>>> >>>> >>>> >>>> # If you wish to use FTP, set "enable" to "true", then >>>> >>>> # fill out the next four lines. >>>> >>>> # Use quotes around passwords to guard against parsing errors. >>>> >>>> enable = false >>>> >>>> user = XXX obfuscated by wee_debug XXX >>>> >>>> password = XXX obfuscated by wee_debug XXX >>>> >>>> server = replace_me # The ftp server name, e.g, >>>> www.myserver.org >>>> >>>> path = replace_me # The destination directory, e.g., /weather >>>> >>>> >>>> >>>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>>> servers >>>> >>>> # support this. >>>> >>>> secure_ftp = False >>>> >>>> >>>> >>>> # To upload files from something other than what HTML_ROOT is >>>> set >>>> >>>> # to above, specify a different HTML_ROOT here. >>>> >>>> #HTML_ROOT = /var/www/html/weewx >>>> >>>> >>>> >>>> # Most FTP servers use port 21 >>>> >>>> port = 21 >>>> >>>> >>>> >>>> # Set to 1 to use passive mode, zero for active mode >>>> >>>> passive = 1 >>>> >>>> >>>> >>>> [[RSYNC]] >>>> >>>> # rsync'ing to a webserver is treated as just another report >>>> >>>> skin = Rsync >>>> >>>> >>>> >>>> # If you wish to use rsync, you must configure passwordless ssh >>>> using >>>> >>>> # public/private key authentication from the user account that >>>> weewx >>>> >>>> # runs to the user account on the remote machine where the files >>>> >>>> # will be copied. >>>> >>>> # >>>> >>>> # If you wish to use rsync, set "enable" to "true", then >>>> >>>> # fill out server, user, and path. >>>> >>>> # The server should appear in your .ssh/config file. >>>> >>>> # The user is the username used in the identity file. >>>> >>>> # The path is the destination directory, such as >>>> /var/www/html/weather. >>>> >>>> # Be sure that the user has write permissions on the >>>> destination! >>>> >>>> enable = false >>>> >>>> server = replace_me >>>> >>>> user = XXX obfuscated by wee_debug XXX >>>> >>>> path = replace_me >>>> >>>> >>>> >>>> # To upload files from something other than what HTML_ROOT is >>>> set >>>> >>>> # to above, specify a different HTML_ROOT here. >>>> >>>> #HTML_ROOT = /var/www/html/weewx >>>> >>>> >>>> >>>> # Rsync can be configured to remove files from the remote >>>> server if >>>> >>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: >>>> if you >>>> >>>> # make a mistake in the remote path, you could could >>>> unintentionally >>>> >>>> # cause unrelated files to be deleted. Set to 1 to enable >>>> remote file >>>> >>>> # deletion, zero to allow files to accumulate remotely. >>>> >>>> delete = 0 >>>> >>>> >>>> >>>> # Options in the [[Defaults]] section below will apply to all >>>> reports. >>>> >>>> # What follows are a few of the more popular options you may want to >>>> >>>> # uncomment, then change. >>>> >>>> [[Defaults]] >>>> >>>> >>>> >>>> # Which language to use for all reports. Not all skins support >>>> all languages. >>>> >>>> # You can override this for individual reports. >>>> >>>> lang = en >>>> >>>> >>>> >>>> # Which unit system to use for all reports. Choices are 'us', >>>> 'metric', or 'metricwx'. >>>> >>>> # You can override this for individual reports. >>>> >>>> unit_system = us >>>> >>>> >>>> >>>> [[[Units]]] >>>> >>>> >>>> >>>> # Option "unit_system" above sets the general unit system, >>>> but overriding specific unit >>>> >>>> # groups is possible. These are popular choices. Uncomment >>>> and set as appropriate. >>>> >>>> # NB: The unit is always in the singular. I.e., >>>> 'mile_per_hour', >>>> >>>> # NOT 'miles_per_hour' >>>> >>>> [[[[Groups]]]] >>>> >>>> # group_altitude = meter # Options are >>>> 'foot' or 'meter' >>>> >>>> # group_pressure = mbar # Options are >>>> 'inHg', 'mmHg', 'mbar', or 'hPa' >>>> >>>> # group_rain = mm # Options are >>>> 'inch', 'cm', or 'mm' >>>> >>>> # group_rainrate = mm_per_hour # Options are >>>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >>>> >>>> # group_temperature = degree_C # Options are >>>> 'degree_C', 'degree_F', or 'degree_K' >>>> >>>> # The following line is used to keep the above lines >>>> indented properly. >>>> >>>> # It can be ignored. >>>> >>>> unused = unused >>>> >>>> >>>> >>>> # Uncommenting the following section frequently results in >>>> more >>>> >>>> # attractive formatting of times and dates, but may not >>>> work in >>>> >>>> # your locale. >>>> >>>> [[[[TimeFormats]]]] >>>> >>>> # day = %H:%M >>>> >>>> # week = %H:%M on %A >>>> >>>> # month = %d-%b-%Y %H:%M >>>> >>>> # year = %d-%b-%Y %H:%M >>>> >>>> # rainyear = %d-%b-%Y %H:%M >>>> >>>> # current = %d-%b-%Y %H:%M >>>> >>>> # ephem_day = %H:%M >>>> >>>> # ephem_year = %d-%b-%Y %H:%M >>>> >>>> # The following line is used to keep the above lines >>>> indented properly. >>>> >>>> # It can be ignored. >>>> >>>> unused = unused >>>> >>>> >>>> >>>> [[[Labels]]] >>>> >>>> # Users frequently change the labels for these observation >>>> types >>>> >>>> [[[[Generic]]]] >>>> >>>> # inHumidity = Inside Humidity >>>> >>>> # inTemp = Inside Temperature >>>> >>>> # outHumidity = Outside Humidity >>>> >>>> # outTemp = Outside Temperature >>>> >>>> # extraTemp1 = Temperature1 >>>> >>>> # extraTemp2 = Temperature2 >>>> >>>> # extraTemp3 = Temperature3 >>>> >>>> # The following line is used to keep the above lines >>>> indented properly. >>>> >>>> # It can be ignored. >>>> >>>> unused = unused >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This service acts as a filter, converting the unit system coming >>>> from >>>> >>>> # the hardware to a unit system in the database. >>>> >>>> >>>> >>>> [StdConvert] >>>> >>>> >>>> >>>> # The target_unit affects only the unit system in the database. Once >>>> >>>> # chosen it cannot be changed without converting the entire >>>> database. >>>> >>>> # Modification of target_unit after starting weewx will result in >>>> >>>> # corrupt data - the database will contain a mix of US and METRIC >>>> data. >>>> >>>> # >>>> >>>> # The value of target_unit does not affect the unit system for >>>> >>>> # reporting - reports can display US, Metric, or any combination of >>>> units. >>>> >>>> # >>>> >>>> # In most cases, target_unit should be left as the default: US >>>> >>>> # >>>> >>>> # In particular, those migrating from a standard wview installation >>>> >>>> # should use US since that is what the wview database contains. >>>> >>>> >>>> >>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >>>> >>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section can adjust data using calibration expressions. >>>> >>>> >>>> >>>> [StdCalibrate] >>>> >>>> >>>> >>>> [[Corrections]] >>>> >>>> # For each type, an arbitrary calibration expression can be >>>> given. >>>> >>>> # It should be in the units defined in the StdConvert section. >>>> >>>> # Example: >>>> >>>> foo = foo + 0.2 >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section is for quality control checks. If units are not >>>> specified, >>>> >>>> # values must be in the units defined in the StdConvert section. >>>> >>>> >>>> >>>> [StdQC] >>>> >>>> >>>> >>>> [[MinMax]] >>>> >>>> barometer = 26, 32.5, inHg >>>> >>>> pressure = 24, 34.5, inHg >>>> >>>> outTemp = -40, 120, degree_F >>>> >>>> inTemp = 10, 120, degree_F >>>> >>>> outHumidity = 0, 100 >>>> >>>> inHumidity = 0, 100 >>>> >>>> windSpeed = 0, 120, mile_per_hour >>>> >>>> rain = 0, 10, inch >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section controls the origin of derived values. >>>> >>>> >>>> >>>> [StdWXCalculate] >>>> >>>> >>>> >>>> [[Calculations]] >>>> >>>> # How to calculate derived quantities. Possible values are: >>>> >>>> # hardware - use the value provided by hardware >>>> >>>> # software - use the value calculated by weewx >>>> >>>> # prefer_hardware - use value provide by hardware if available, >>>> >>>> # otherwise use value calculated by weewx >>>> >>>> >>>> >>>> pressure = prefer_hardware >>>> >>>> altimeter = prefer_hardware >>>> >>>> appTemp = prefer_hardware >>>> >>>> barometer = prefer_hardware >>>> >>>> cloudbase = prefer_hardware >>>> >>>> dewpoint = prefer_hardware >>>> >>>> ET = prefer_hardware >>>> >>>> heatindex = prefer_hardware >>>> >>>> humidex = prefer_hardware >>>> >>>> inDewpoint = prefer_hardware >>>> >>>> maxSolarRad = prefer_hardware >>>> >>>> rainRate = prefer_hardware >>>> >>>> windchill = prefer_hardware >>>> >>>> windrun = prefer_hardware >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # For hardware that supports it, this section controls how often the >>>> >>>> # onboard clock gets updated. >>>> >>>> >>>> >>>> [StdTimeSynch] >>>> >>>> >>>> >>>> # How often to check the weather station clock for drift (in >>>> seconds) >>>> >>>> clock_check = 14400 >>>> >>>> >>>> >>>> # How much it can drift before we will correct it (in seconds) >>>> >>>> max_drift = 5 >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section is for configuring the archive service. >>>> >>>> >>>> >>>> [StdArchive] >>>> >>>> >>>> >>>> # If the station hardware supports data logging then the archive >>>> interval >>>> >>>> # will be downloaded from the station. Otherwise, specify it (in >>>> seconds). >>>> >>>> archive_interval = 300 >>>> >>>> >>>> >>>> # If possible, new archive records are downloaded from the station >>>> >>>> # hardware. If the hardware does not support this, then new archive >>>> >>>> # records will be generated in software. >>>> >>>> # Set the following to "software" to force software record >>>> generation. >>>> >>>> record_generation = hardware >>>> >>>> >>>> >>>> # Whether to include LOOP data in hi/low statistics >>>> >>>> loop_hilo = True >>>> >>>> >>>> >>>> # The data binding used to save archive records >>>> >>>> data_binding = wx_binding >>>> >>>> >>>> >>>> # Whether to log successful archive operations >>>> >>>> log_success = True >>>> >>>> >>>> >>>> # Whether to log unsuccessful archive operations >>>> >>>> log_failure = True >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section binds a data store to a database. >>>> >>>> >>>> >>>> [DataBindings] >>>> >>>> >>>> >>>> [[wx_binding]] >>>> >>>> # The database must match one of the sections in [Databases]. >>>> >>>> # This is likely to be the only option you would want to change. >>>> >>>> database = archive_mysql >>>> >>>> # The name of the table within the database >>>> >>>> table_name = archive >>>> >>>> # The manager handles aggregation of data for historical >>>> summaries >>>> >>>> manager = weewx.manager.DaySummaryManager >>>> >>>> # The schema defines the structure of the database. >>>> >>>> # It is *only* used when the database is created. >>>> >>>> schema = schemas.wview_extended.schema >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section defines various databases. >>>> >>>> >>>> >>>> [Databases] >>>> >>>> >>>> >>>> # A SQLite database is simply a single file >>>> >>>> [[archive_sqlite]] >>>> >>>> database_name = weewx.sdb >>>> >>>> database_type = SQLite >>>> >>>> >>>> >>>> # MySQL >>>> >>>> [[archive_mysql]] >>>> >>>> database_name = weewx >>>> >>>> database_type = MySQL >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section defines defaults for the different types of databases. >>>> >>>> >>>> >>>> [DatabaseTypes] >>>> >>>> >>>> >>>> # Defaults for SQLite databases >>>> >>>> [[SQLite]] >>>> >>>> driver = weedb.sqlite >>>> >>>> # Directory in which the database files are located >>>> >>>> SQLITE_ROOT = /var/lib/weewx >>>> >>>> >>>> >>>> # Defaults for MySQL databases >>>> >>>> [[MySQL]] >>>> >>>> driver = weedb.mysql >>>> >>>> # The host where the database is located >>>> >>>> host = 192.168.1.17 >>>> >>>> # The user name for logging in to the host >>>> >>>> user = XXX obfuscated by wee_debug XXX >>>> >>>> # The password (use quotes to guard against parsing errors) >>>> >>>> password = XXX obfuscated by wee_debug XXX >>>> >>>> >>>> >>>> >>>> ############################################################################## >>>> >>>> >>>> >>>> # This section configures the internal weewx engine. >>>> >>>> >>>> >>>> [Engine] >>>> >>>> >>>> >>>> # The following section specifies which services should be run and >>>> in what order. >>>> >>>> [[Services]] >>>> >>>> prep_services = weewx.engine.StdTimeSynch >>>> >>>> data_services = , >>>> >>>> process_services = weewx.engine.StdConvert, >>>> weewx.engine.StdCalibrate, weewx.engine.StdQC, >>>> weewx.wxservices.StdWXCalculate >>>> >>>> xtype_services = weewx.wxxtypes.StdWXXTypes, >>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, >>>> weewx.wxxtypes.StdDelta >>>> >>>> archive_services = weewx.engine.StdArchive >>>> >>>> restful_services = weewx.restx.StdStationRegistry, >>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS >>>> >>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >>>> >>>> >>>> >>>> wee_debug report successfully generated >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/fe01a8f9-417d-4a6a-937b-1944523c48b1n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/fe01a8f9-417d-4a6a-937b-1944523c48b1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/147d127f-b142-4d71-84c2-0fe62cf38586n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/147d127f-b142-4d71-84c2-0fe62cf38586n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1371fa4b-3c43-4743-90b0-2168d87d4f33n%40googlegroups.com.
