I've similar failures for the WindGust, but only in the *creation *of "image" for the *stacked WindRose*. I use the blue sofaskin on a renkforce WH2315, alias FineOffset.
It was working nicely with 4.5.1... gjr80 schrieb am Mittwoch, 16. Februar 2022 um 02:30:05 UTC+1: > The 4.5.1 archive record looks very much like a software generated archive > record, you can tell by the windDir value. The windDir value in a > hardware generated archive record from a VP2 appears in multiples of 12.5 > degrees - that is fixed and a limitation of the archive record format > emitted from the console/logger. In a WeeWX VP2 hardware generated archive > record the wind direction values will be multiples of 12.5 or None. > Software generated archive records contain an average of the loop packet > windDir values. windDir in a VP2 loop packet is in whole degrees and not > subject to the '12.5 degree multiple' effect. So in a software generated > archive record windDir will be a float, usually with a number of decimal > places and certainly (almost always) not a multiple of 12.5. I also see > THSW in the archive records, THSW is only present in the LOOP2 archive > packet so I am guessing you are using LOOP2 instead of the normal LOOP1 > packet. Should not be a problem but it's something out of the ordinary. > > Might help to see the WeeWX startup for each case and weewx.conf to > understand your configuration. You say record generation is set to hardware > in weewx.conf, that is great but not necessarily what is used by WeeWX. > WeeWX will try hardware and if for some reason it doesn't work/isn't > available WeeWX will drop back to software record generation. Always best > to check what is in the log. > > I would also look at the loop packets, what wind direction values do you > see in loop packets? What appears in the subsequent archive record? No need > to modify WeeWX, just run WeeWX directly > <http://weewx.com/docs/usersguide.htm#Running_directly> and you will see > loop packets and archive records direct to console. > > Gary > On Wednesday, 16 February 2022 at 03:02:54 UTC+10 James Taylor wrote: > >> Hello >> >> I've upgraded to weewx 4.6.2 and found out that my vantage Pro2 REC is >> giving a different output for windDir >> >> record_generation is set to hardware in weewx.conf >> >> I amended StdPrint to output new_archive_record to stdout and log.debug >> and I can see a difference >> >> 4.6.2 - >> Feb 15 16:30:15 pi weewx[21988] DEBUG weewx.engine: REC: 2022-02-15 >> 16:30:00 GMT (1644942600) 'altimeter': '29.664795850933803', 'appTemp': >> '44.26912313212261', 'bar_calibration': '-0.0020000000000000013', >> 'bar_offset': '-0.010000000000000005', 'bar_reduction': >> '0.0020000000000000013', 'barometer': '29.673', 'beaufort': '2', >> 'cloudbase': '794.2252812978254', 'consBatteryVoltage': '4.65', 'dateTime': >> '1644942600', 'dayET': '0.013', 'dayRain': '0.13385826690000002', >> 'dewpoint': '46.75340876228957', 'ET': '0.0', 'extraAlarm1': '0.0', >> 'extraAlarm2': '0.0', 'extraAlarm3': '0.0', 'extraAlarm4': '0.0', >> 'extraAlarm5': '0.0', 'extraAlarm6': '0.0', 'extraAlarm7': '0.0', >> 'extraAlarm8': '0.0', 'forecastIcon': '3.0', 'forecastRule': '158', >> 'heatindex': '47.358000000000004', 'highOutTemp': '48.5', 'highRadiation': >> '11.0', 'highUV': '0.0', 'hourRain': '0.0078740157', 'humidex': >> '49.280997613295085', 'inDewpoint': '50.40086122975667', 'inHumidity': >> '48.0', 'insideAlarm': '0.0', 'inTemp': '71.1', 'interval': '5', >> 'leafWet4': '0.0', 'lowOutTemp': '48.4', 'maxSolarRad': >> '46.94974186677293', 'monthET': '0.52', 'monthRain': '1.0787401509', >> 'outHumidity': '94.0', 'outsideAlarm1': '0.0', 'outsideAlarm2': '0.0', >> 'outTemp': '48.4', 'pressure': '29.21395918348061', 'pressure_raw': >> '29.224799999999995', 'radiation': '5.3999999999999995', 'rain': '0.0', >> 'rain15': '0.0', 'rain24': '0.13385826690000002', 'rainAlarm': '0.0', >> 'rainRate': '0.0', 'rxCheckPercent': '97.375', 'soilLeafAlarm1': '0.0', >> 'soilLeafAlarm2': '0.0', 'soilLeafAlarm3': '0.0', 'soilLeafAlarm4': '0.0', >> 'stormRain': '0.13385826690000002', 'stormStart': '1644883200.0', >> 'sunrise': '1644912960.0', 'sunset': '1644949080.0', 'sunshineDuration': >> '0.0', 'THSW': '45.0', 'trendIcon': '-20.0', 'txBatteryStatus': '0', >> 'usUnits': '1', 'UV': '0.0', 'wind_samples': '114.0', 'windchill': >> '45.762013144176095', 'windDir': 'None', 'windGust': '10.0', 'windGust10': >> '10.0', 'windGustDir': '247.5', 'windGustDir10': '247.0', 'windrun': '0.5', >> 'windSpeed': '6.0', 'windSpeed2': '5.7', 'windSpeed10': '5.0', 'yearET': >> '1.13', 'yearRain': '1.5275590458000001' >> >> Back to 4.5.1 and everything is good ( windDir: 237.52965750482582). >> >> Feb 15 16:50:15 pi weewx[22480] DEBUG weewx.engine: REC: 2022-02-15 >> 16:50:00 GMT (1644943800) altimeter: 29.656827096532094, appTemp: >> 45.77889412649187, bar_calibration: -0.0020000000000000013, bar_offset: >> -0.010000000000000005, barometer: 29.665, bar_reduction: >> 0.0020000000000000013, beaufort: 1, cloudbase: 730.1419634508915, >> consBatteryVoltage: 4.65, dateTime: 1644943800, dayET: 0.013, dayRain: >> 0.13385826690000002, dewpoint: 46.83537536081608, ET: 0.0, extraAlarm1: >> 0.0, extraAlarm2: 0.0, extraAlarm3: 0.0, extraAlarm4: 0.0, extraAlarm5: >> 0.0, extraAlarm6: 0.0, extraAlarm7: 0.0, extraAlarm8: 0.0, forecastIcon: >> 3.0, forecastRule: 158, heatindex: 47.185, highOutTemp: 48.2, >> highRadiation: 7.0, highUV: 0.0, hourRain: 0.0, humidex: 49.11495517097403, >> inDewpoint: 50.309529357501425, inHumidity: 48.0, insideAlarm: 0.0, inTemp: >> 71.0, interval: 5, leafWet4: 0.0, lowOutTemp: 48.1, maxSolarRad: 0.0, >> monthET: 0.52, monthRain: 1.0787401509, outHumidity: 95.0, outsideAlarm1: >> 0.0, outsideAlarm2: 0.0, outTemp: 48.2, pressure: 29.206088977429996, >> pressure_raw: 29.21954545454549, radiation: 4.2, rain: 0.0, rain15: 0.0, >> rain24: 0.13385826690000002, rainAlarm: 0.0, rainRate: 0.0, rxCheckPercent: >> 98.22916666666666, soilLeafAlarm1: 0.0, soilLeafAlarm2: 0.0, >> soilLeafAlarm3: 0.0, soilLeafAlarm4: 0.0, stormRain: 0.13385826690000002, >> stormStart: 1644883200.0, sunrise: 1644912960.0, sunset: 1644949080.0, >> sunshineDuration: 0.0, THSW: 45.666666666666664, trendIcon: -20.0, >> txBatteryStatus: 0, usUnits: 1, UV: 0.0, windchill: 48.2, windDir: >> 237.52965750482582, windGust: 6.0, windGust10: 0.7, windGustDir: 225.0, >> windGustDir10: 225.0, windrun: 0.25, wind_samples: 115.0, windSpeed: 3.0, >> windSpeed10: 3.0, windSpeed2: 3.2, yearET: 1.13, yearRain: 1.52755904580000 >> >> I've issued a clear-memory just in case it was corrupted, but I'm now >> thinking something else is going on. The Loop data is fine and mqtt is >> working as expected. >> >> Any idea on how to debug this some more? >> >> Thanks >> >> James >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4278c681-1690-453f-9e90-0529753bae92n%40googlegroups.com.
