Hi Gary, this was the solution for my unit problem. Thanks for your help, also for the hint about using the extensions.py
Many greetings Udo gjr80 schrieb am Montag, 14. Februar 2022 um 21:48:48 UTC+1: > I see now there have been some changes have been introduced in WeeWX > v4.6.x to how default labelling and formatting of observation types is > determined and it appears that group_energy/watt_hour may have fallen > through the cracks. I think we can work around the issue in your case by > adding some additional lines to user/extensions.py: > > weewx.units.default_unit_format_dict['watt_hour'] = '%.1f' > weewx.units.default_unit_label_dict['watt_hour'] = u' Wh' > > Again you will need to restart WeeWX for the changes to take effect and > hopefully the first report cycle should add you missing units/formatting. > > Gary > > On Tuesday, 15 February 2022 at 04:18:53 UTC+10 udo.kl...@gmail.com wrote: > >> Hi Gary, unfortunately your tip did not work. "signal1" still has no >> unit. Before the update it still did. >> >> gjr80 schrieb am Montag, 14. Februar 2022 um 01:58:29 UTC+1: >> >>> Making changes to units.py is a poor approach to dealing with problems >>> and should be avoided, at best your changes will not survive a WeeWX >>> upgrade; at worst your changes could unknowingly cause problems elsewhere >>> with WeeWX. >>> >>> If you wish to assign an observation type to a unit group this is best >>> done through the user/extensions.py file. user/extensions.py is >>> intended for users to add code that is to be run during the WeeWX startup >>> and allows user changes to the WeeWX environment to be made in a safe >>> manner. Files in the user directory are protected during a WeeWX upgrade >>> and will not be overwritten. I suggest you revert your changes to >>> units.py and try adding the following to user/extensions.py (untested): >>> >>> import weewx.units >>> weewx.units.obs_group_dict['signal1'] = 'group_energy' >>> >>> Save extensions.py and restart WeeWX. Does that fix your problem? >>> >>> Gary >>> On Monday, 14 February 2022 at 01:14:14 UTC+10 udo.kl...@gmail.com >>> wrote: >>> >>>> Hello all, >>>> >>>> I have updated this weekend to WeeWX version 4.6.2. Actually everything >>>> works as usual, but in my photovoltaic data no units are displayed >>>> anymore. >>>> I have changed the assignment in the units.py as follows "signal1" : >>>> "group_energy", but without success. >>>> >>>> Who knows advice? >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/edeb2070-8000-4991-a387-9773a10bad4bn%40googlegroups.com.
