Hi Gary, unfortunately your tip did not work. "signal1" still has no unit. Before the update it still did.
gjr80 schrieb am Montag, 14. Februar 2022 um 01:58:29 UTC+1: > Making changes to units.py is a poor approach to dealing with problems > and should be avoided, at best your changes will not survive a WeeWX > upgrade; at worst your changes could unknowingly cause problems elsewhere > with WeeWX. > > If you wish to assign an observation type to a unit group this is best > done through the user/extensions.py file. user/extensions.py is intended > for users to add code that is to be run during the WeeWX startup and allows > user changes to the WeeWX environment to be made in a safe manner. Files in > the user directory are protected during a WeeWX upgrade and will not be > overwritten. I suggest you revert your changes to units.py and try adding > the following to user/extensions.py (untested): > > import weewx.units > weewx.units.obs_group_dict['signal1'] = 'group_energy' > > Save extensions.py and restart WeeWX. Does that fix your problem? > > Gary > On Monday, 14 February 2022 at 01:14:14 UTC+10 udo.kl...@gmail.com wrote: > >> Hello all, >> >> I have updated this weekend to WeeWX version 4.6.2. Actually everything >> works as usual, but in my photovoltaic data no units are displayed anymore. >> I have changed the assignment in the units.py as follows "signal1" : >> "group_energy", but without success. >> >> Who knows advice? >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/124154c5-6111-4f77-b1e5-136f572e1c94n%40googlegroups.com.
