I reinstalled weewx. WeatherflowUDP and it worked On Sunday, May 2, 2021, Ron Sell <[email protected]> wrote:
> I am not sure what is going on. I can still only capture wind speed and > direction. > > the data is there in the log but it won't capture it. I pointed > everything back to my AIR and it worked. Changed it back to the tempest and > alli get is N/A > attached my weewx.conf incase someone notices a typo. > > > On Sat, May 1, 2021 at 6:41 PM vince <[email protected]> wrote: > >> I don't see it, but there has to be a typo in weewx.conf someplace. >> >> My old Tempest weewx.conf is at https://community. >> weatherflow.com/t/weewx-udp-driver-for-weatherflow-station/283/189 if >> you want to take a look there. Of course you'll have to edit in your >> serial numbers for your sensor. >> >> On Saturday, May 1, 2021 at 2:02:40 PM UTC-7 [email protected] wrote: >> >>> >>> I am using this udp driver" >>> https://github.com/captain-coredump/weatherflow-udp >>> >>> log attached >>> >>> snip from log: >>> May 1 17:01:19 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'fs': [1, 0, 15675411, 524288], 'seq': 837, 'firmware_revision': >>> '169', 'timestamp': 1619902878, 'serial_number': 'HB-00012441', 'uptime': >>> 8414, 'reset_flags': 'BOR,PIN,POR', 'mqtt_stats': [49, 0], 'rssi': -25, >>> 'type': 'hub_status', 'radio_stats': [5, 1, 0, 3, 0]} >>> May 1 17:01:20 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'firmware_revision': 134, 'timestamp': 1619902879, 'voltage': >>> 2.585, 'rssi': -68, 'hub_sn': 'HB-00012441', 'uptime': 19985, 'hub_rssi': >>> -60, 'sensor_status': 0, 'debug': 0, 'serial_number': 'ST-00021019', >>> 'type': 'device_status'} >>> May 1 17:01:20 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'firmware_revision': 134, 'serial_number': 'ST-00021019', 'type': >>> 'obs_st', 'obs': [[1619902879, 0.54, 3.03, 5.93, 215, 3, 967.62, 16.41, >>> 29.09, 63223, 2.87, 527, 0.0, 0, 0, 0, 2.585, 1]], 'hub_sn': 'HB-00012441'} >>> May 1 17:01:22 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'serial_number': 'ST-00021019', 'type': 'rapid_wind', 'ob': >>> [1619902881, 2.24, 196], 'hub_sn': 'HB-00012441'} >>> May 1 17:01:22 raspberrypi weewx[1884] INFO weewx.restx: MQTT: >>> Published record 2021-05-01 17:01:21 EDT (1619902881) >>> May 1 17:01:25 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'serial_number': 'ST-00021019', 'type': 'rapid_wind', 'ob': >>> [1619902884, 2.24, 205], 'hub_sn': 'HB-00012441'} >>> May 1 17:01:25 raspberrypi weewx[1884] INFO weewx.restx: MQTT: >>> Published record 2021-05-01 17:01:24 EDT (1619902884) >>> May 1 17:01:28 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'serial_number': 'ST-00021019', 'type': 'rapid_wind', 'ob': >>> [1619902887, 1.88, 248], 'hub_sn': 'HB-00012441'} >>> May 1 17:01:28 raspberrypi weewx[1884] INFO weewx.restx: MQTT: >>> Published record 2021-05-01 17:01:27 EDT (1619902887) >>> May 1 17:01:29 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'fs': [1, 0, 15675411, 524288], 'seq': 838, 'firmware_revision': >>> '169', 'timestamp': 1619902888, 'serial_number': 'HB-00012441', 'uptime': >>> 8424, 'reset_flags': 'BOR,PIN,POR', 'mqtt_stats': [49, 0], 'rssi': -26, >>> 'type': 'hub_status', 'radio_stats': [5, 1, 0, 3, 0]} >>> May 1 17:01:31 raspberrypi weewxd: weatherflowudp: MainThread: raw >>> packet: {'serial_number': 'ST-00021019', 'type': 'rapid_wind', 'ob': >>> [1619902890, 2.64, 240], 'hub_sn': 'HB-00012441'} >>> May 1 17:01:31 raspberrypi weewx[1884] INFO weewx.restx: MQTT: >>> Published record 2021-05-01 17:01:30 EDT (1619902890) >>> >>> >>> On Sat, May 1, 2021 at 4:24 PM vince <[email protected]> wrote: >>> >>>> Without seeing your logs, it's uncertain what you're seeing. >>>> We also don't know which driver of the many WF drivers to pick from you >>>> are running. >>>> >>>> The FAQ >>>> <https://github.com/weewx/weewx/wiki/faq-how-to-report-a-problem> has >>>> more info on how to give us enough information to understand your system. >>>> >>>> It is almost certain that you have a typo in your sensor_map especially >>>> since you see rapid_wind but not anything obs_st being recorded. >>>> >>>> That said, you might want to run my standalone WF UDP listener (link) >>>> <https://github.com/vinceskahan/weatherflow-udp-listener> with the >>>> --raw --debug flags to see what your Hub is emitting in its UDP. The >>>> github page has too much info on how to run the listener to repeat here. >>>> >>>> On Saturday, May 1, 2021 at 1:10:57 PM UTC-7 [email protected] wrote: >>>> >>>>> I recently upgraded to the Tempest. I updated my weewx.conf file for >>>>> the new sensor map. >>>>> >>>>> The only thing that is recording is the wind speed and direction. >>>>> >>>>> I checked the log and the packets are there. >>>>> >>>>> When i revert back to my AIR it works fine. >>>>> >>>>> Any help would be appreciated. >>>>> >>>>> [[sensor_map]] >>>>> outTemp = air_temperature.ST-00021019.obs_st >>>>> outHumidity = relative_humidity.ST-00021019.obs_st >>>>> pressure = station_pressure.ST-00021019.obs_st >>>>> lightning_strike_count = lightning_strike_count.ST-00021019.obs_st >>>>> lightning_distance = lightning_strike_avg_distance.ST-00021019.obs_st >>>>> outTempBatteryStatus = battery.ST-00021019.obs_st >>>>> windSpeed = wind_speed.ST-00021019.rapid_wind >>>>> windDir = wind_direction.ST-00021019.rapid_wind >>>>> luxXXX = illuminance.ST-00021019.obs_st >>>>> UV = uv.ST-00021019.obs_st >>>>> rain = rain_accumulated.ST-00021019.obs_st >>>>> windBatteryStatus = battery.ST-00021019.obs_st >>>>> radiation = solar_radiation.ST-00000025.obs_st >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit https://groups.google.com/d/ >>>> msgid/weewx-user/5f4b21b3-c704-4e41-954a-5fc6a6fd63aen% >>>> 40googlegroups.com >>>> <https://groups.google.com/d/msgid/weewx-user/5f4b21b3-c704-4e41-954a-5fc6a6fd63aen%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit https://groups.google.com/d/ >> msgid/weewx-user/8fd3e21f-6dc0-4659-adad-8c7c21627ec2n%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/8fd3e21f-6dc0-4659-adad-8c7c21627ec2n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CABn15dYn8tFUsQ2R6ahK2suaL8kOpFRgHY2Co7_e9RdJ4aHJ_g%40mail.gmail.com.
