Thanks for the reply, really appreciate the help. I changed the
archive_interval to 100 and restarted. Unfortunately, I got the same
results, even after waiting 30 minutes. From the log:
Feb 12 15:31:51 DEBUG user.sdr: lines=['{"time" : "2021-02-12 21:31:48",
"model" : "Fineoffset-WH65B", "id" : 97, "battery_ok" : 1, "temperature_C"
: 2.000, "humidity" : 91, "wind_dir_deg" : 357, "wind_avg_m_s" : 0.765,
"wind_max_m_s" : 1.530, "rain_mm" : 3.810, "uv" : 57, "uvi" : 0,
"light_lux" : 7130.000, "mic" : "CRC"}\n']
Feb 12 16:01:11 DEBUG user.sdr: lines=['{"time" : "2021-02-12 22:01:08",
"model" : "Fineoffset-WH65B", "id" : 97, "battery_ok" : 1, "temperature_C"
: 1.500, "humidity" : 92, "wind_dir_deg" : 0, "wind_avg_m_s" : 1.530,
"wind_max_m_s" : 2.040, "rain_mm" : 3.810, "uv" : 33, "uvi" : 0,
"light_lux" : 3844.000, "mic" : "CRC"}\n']
Thanks
Ed
On Friday, February 12, 2021 at 2:55:29 PM UTC-6 tim lambert wrote:
> Ed,
>
> Your archive_interval (in StdArchive section) is set to 300 seconds (5
> minutes) -- meaning that data will be inserted into the DB every 5
> minutes.
>
> The log file simply shows that your weather station is being polled for
> data regularly for data. You simply need to allow 5-10 minutes to pass
> after starting weeWX, then you can look at your DB to verify data is being
> written.
>
> The archive_interval also determines how often reports (aka skins) are
> generated/published. By looking at your log files, you can determine how
> long it takes for reports to generate -- based on that information you can
> adjust your archive_interval to possibly write more often.
>
> Hope this helps.
>
> -- Tim
>
> On Friday, February 12, 2021 at 11:35:55 AM UTC-8 Ed Belcher wrote:
>
>> I'm using the SDR driver for Ambient Weather
>> WS-2902C "Fineoffset-WH65B" on ubuntu 20.04. I am collecting data, but it
>> does not insert into the database and it does not generate html reports. I
>> would appreciate any advice.
>> Thanks
>> Ed
>>
>> ##########################################################
>> log:
>> INFO __main__: Initializing weewx version 4.4.0
>> INFO __main__: Using Python 3.9.0+ (default, Oct 20 2020, 08:43:38)
>> #012[GCC 9.3.0]
>> INFO __main__: Platform Linux-5.4.0-65-generic-x86_64-with-glibc2.31
>> INFO __main__: Locale is 'en_US.UTF-8'
>> INFO __main__: Using configuration file weewx.conf
>> INFO __main__: Debug is 1
>> DEBUG __main__: Initializing engine
>> INFO weewx.engine: Loading station type SDR (user.sdr)
>> INFO user.sdr: driver version is 0.78
>> INFO user.sdr: sensor map is {'outTemp':
>> 'temperature.16.FOWH65BAltPacket', 'outHumidity':
>> 'humidity.16.FOWH65BAltPacket', 'windDir': 'wind_dir.16.FOWH65BAltPacket',
>> 'windSpeed': 'wind_speed.16.FOWH65BAltPacket', 'windGust':
>> 'wind_gust.16.FOWH65BAltPacket', 'rain_total':
>> 'rain_total.16.FOWH65BAltPacket', 'UV': 'uv_index.16.FOWH65BAltPacket',
>> 'outTempBatteryStatus': 'battery.16.FOWH65BAltPacket'}
>> INFO user.sdr: deltas is {'rain': 'rain_total'}
>> INFO user.sdr: startup process 'rtl_433 -M utc -F json -R 78 -f 914980000
>> -s 250000'
>> DEBUG user.sdr: start async reader for stdout-thread
>> DEBUG user.sdr: start async reader for stderr-thread
>> DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch
>> DEBUG weewx.engine: Loading service weewx.engine.StdConvert
>> INFO weewx.engine: StdConvert target unit is 0x1
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert
>> DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate
>> DEBUG weewx.engine: Loading service weewx.engine.StdQC
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdQC
>> DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate
>> DEBUG weewx.manager: Daily summary version is 4.0
>> DEBUG weewx.engine: Finished loading service
>> weewx.wxservices.StdWXCalculate
>> DEBUG weewx.engine: Loading service weewx.wxxtypes.StdWXXTypes
>> DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdWXXTypes
>> DEBUG weewx.engine: Loading service weewx.wxxtypes.StdPressureCooker
>> DEBUG weewx.engine: Finished loading service
>> weewx.wxxtypes.StdPressureCooker
>> DEBUG weewx.engine: Loading service weewx.wxxtypes.StdRainRater
>> DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdRainRater
>> DEBUG weewx.engine: Loading service weewx.wxxtypes.StdDelta
>> DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdDelta
>> DEBUG weewx.engine: Loading service weewx.engine.StdArchive
>> INFO weewx.engine: Archive will use data binding wx_binding
>> INFO weewx.engine: Record generation will be attempted in 'software'
>> INFO weewx.engine: Using archive interval of 300 seconds (software record
>> generation)
>> DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive
>> DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry
>> INFO weewx.restx: StationRegistry: Registration not requested.
>> DEBUG weewx.engine: Finished loading service
>> weewx.restx.StdStationRegistry
>> DEBUG weewx.engine: Loading service weewx.restx.StdWunderground
>> INFO weewx.restx: Wunderground: Posting not enabled.
>> DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground
>> DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather
>> INFO weewx.restx: PWSweather: Posting not enabled.
>> DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather
>> DEBUG weewx.engine: Loading service weewx.restx.StdCWOP
>> INFO weewx.restx: CWOP: Posting not enabled.
>> DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP
>> DEBUG weewx.engine: Loading service weewx.restx.StdWOW
>> INFO weewx.restx: WOW: Posting not enabled.
>> DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW
>> DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS
>> INFO weewx.restx: AWEKAS: Posting not enabled.
>> DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS
>> DEBUG weewx.engine: Loading service weewx.engine.StdPrint
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint
>> DEBUG weewx.engine: Loading service weewx.engine.StdReport
>> DEBUG weewx.engine: Finished loading service weewx.engine.StdReport
>> INFO __main__: Starting up weewx version 4.4.0
>> DEBUG weewx.engine: Station does not support reading the time
>> INFO weewx.engine: Using binding 'wx_binding' to database 'weewx'
>> INFO weewx.manager: Starting backfill of daily summaries
>> INFO weewx.manager: Empty database
>> INFO weewx.engine: Starting main packet loop.
>>
>> DEBUG user.sdr: lines=[]
>> message repeated 3 times: [ DEBUG user.sdr: lines=[]]
>> DEBUG user.sdr: lines=[]
>> message repeated 8 times: [ DEBUG user.sdr: lines=[]]
>> DEBUG user.sdr: lines=['{"time" : "2021-02-12 19:10:28", "model" :
>> "Fineoffset-WH65B", "id" : 97, "battery_ok" : 1, "temperature_C" : 2.000,
>> "humidity" : 93, "wind_dir_deg" : 17, "wind_avg_m_s" : 0.446,
>> "wind_max_m_s" : 0.510, "rain_mm" : 3.810, "uv" : 71, "uvi" : 0,
>> "light_lux" : 9005.000, "mic" : "CRC"}\n']
>> DEBUG user.sdr: lines=[]
>>
>> #######################################################
>> weewx.conf
>> # WEEWX CONFIGURATION FILE
>> #
>> # Copyright (c) 2009-2021 Tom Keffer
>> # See the file LICENSE.txt for your rights.
>>
>>
>> ##############################################################################
>>
>> # This section is for general configuration information.
>>
>> # Set to 1 for extra debug info, otherwise comment it out or set to zero
>> debug = 1
>>
>> # Root directory of the weewx data file hierarchy for this station
>> WEEWX_ROOT = /
>>
>> # Whether to log successful operations
>> log_success = True
>>
>> # Whether to log unsuccessful operations
>> log_failure = True
>>
>> # How long to wait before timing out a socket (FTP, HTTP) connection
>> socket_timeout = 20
>>
>> # Do not modify this. It is used when installing and updating weewx.
>> version = 4.4.0
>>
>>
>> ##############################################################################
>>
>> # This section is for information about the station.
>>
>> [Station]
>>
>> # Description of the station location
>> location = "XXXXXXXXXXXXXXXXXXXXXXXXXX"
>>
>> # Latitude in decimal degrees. Negative for southern hemisphere
>> latitude = XXXXXXXXXXXXXXXXXX
>> # Longitude in decimal degrees. Negative for western hemisphere.
>> longitude = XXXXXXXXXXXXXXXXXXXXXX
>>
>> # Altitude of the station, with unit it is in. This is downloaded from
>> # from the station if the hardware supports it.
>> altitude = 141, foot
>>
>> # Set to type of station hardware. There must be a corresponding
>> stanza
>> # in this file with a 'driver' parameter indicating the driver to be
>> used.
>> station_type = SDR
>>
>> # If you have a website, you may specify an URL
>> #station_url = http://www.example.com
>>
>> # The start of the rain year (1=January; 10=October, etc.). This is
>> # downloaded from the station if the hardware supports it.
>> rain_year_start = 1
>>
>> # Start of week (0=Monday, 6=Sunday)
>> week_start = 6
>>
>>
>> ##############################################################################
>>
>> [Interceptor]
>> # This section is for the network traffic interceptor driver.
>>
>> # The driver to use:
>> driver = user.interceptor
>>
>> # Specify the hardware device to capture. Options include:
>> # acurite-bridge - acurite internet bridge, smarthub, or access
>> # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
>> # lw30x - oregon scientific LW301/LW302
>> # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
>> # ecowitt-client - any hardware that uses the ecowitt protocol
>> # wu-client - any hardware that uses the weather underground
>> protocol
>> device_type = observer
>> port = 55
>>
>>
>> ##############################################################################
>>
>> [Simulator]
>> # This section is for the weewx weather station simulator
>>
>> # The time (in seconds) between LOOP packets.
>> loop_interval = 2.5
>>
>> # The simulator mode can be either 'simulator' or 'generator'.
>> # Real-time simulator. Sleep between each LOOP packet.
>> mode = simulator
>> # Generator. Emit LOOP packets as fast as possible (useful for
>> testing).
>> #mode = generator
>>
>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
>> default
>> # is to use the present time.
>> #start = 2011-01-01T00:00
>>
>> # The driver to use:
>> driver = weewx.drivers.simulator
>>
>>
>> ##############################################################################
>>
>> [SDR]
>>
>>
>> # This section is for the software-defined radio driver.
>>
>> # The time (in seconds) between LOOP packets.
>> loop_interval = 2.5
>>
>> # Direct testing command:
>> # PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/sdr.py
>> --cmd="rtl_433 -M utc -F json -f 914980000 -s 250000"
>> # Command probably needs a -p frequency offset parameter.
>>
>> # The driver to use
>> driver = user.sdr
>> path = /usr/share/weewx/user/
>> # ld_library_path = /usr/local/include
>> cmd = rtl_433 -M utc -F json -R 78 -f 914980000 -s 250000
>> [[sensor_map]]
>> outTemp = temperature.16.FOWH65BAltPacket
>> outHumidity = humidity.16.FOWH65BAltPacket
>> windDir = wind_dir.16.FOWH65BAltPacket
>> windSpeed = wind_speed.16.FOWH65BAltPacket
>> windGust = wind_gust.16.FOWH65BAltPacket
>> rain_total = rain_total.16.FOWH65BAltPacket
>> UV = uv_index.16.FOWH65BAltPacket
>> # uv = uv.16.FOWH65BAltPacket # Not displaying in web page
>> # light = light.16.FOWH65BAltPacket # Not displaying in web page
>> outTempBatteryStatus = battery.16.FOWH65BAltPacket
>> [[deltas]]
>> rain = rain_total
>>
>>
>> ##############################################################################
>>
>> [FineOffsetUSB]
>> # This section is for the Fine Offset series of weather stations.
>>
>> # The station model, e.g., WH1080, WS1090, WS2080, WH3081
>> model = WH2900
>>
>> # How often to poll the station for data, in seconds
>> polling_interval = 60
>>
>> # The driver to use:
>> driver = weewx.drivers.fousb
>>
>>
>> ##############################################################################
>>
>> # This section is for uploading data to Internet sites
>>
>> [StdRESTful]
>>
>> [[StationRegistry]]
>> # To register this weather station with weewx, set this to true
>> register_this_station = false
>>
>> [[AWEKAS]]
>> # This section is for configuring posts to AWEKAS.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a username and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = false
>> username = replace_me
>> password = replace_me
>>
>> [[CWOP]]
>> # This section is for configuring posts to CWOP.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify the station ID (e.g., CW1234).
>> enable = false
>> station = replace_me
>>
>> # If this is an APRS (radio amateur) station, uncomment
>> # the following and replace with a passcode (e.g., 12345).
>> #passcode = replace_me (APRS stations only)
>>
>> [[PWSweather]]
>> # This section is for configuring posts to PWSweather.com.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a station and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = false
>> station = replace_me
>> password = replace_me
>>
>> [[WOW]]
>> # This section is for configuring posts to WOW.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a station and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = false
>> station = replace_me
>> password = replace_me
>>
>> [[Wunderground]]
>> # This section is for configuring posts to the Weather
>> Underground.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a station (e.g., 'KORHOODR3') and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = false
>> station = replace_me
>> password = replace_me
>>
>> # If you plan on using wunderfixer, set the following
>> # to your API key:
>> api_key = replace_me
>>
>> # Set the following to True to have weewx use the WU "Rapidfire"
>> # protocol. Not all hardware can support it. See the User's Guide.
>> rapidfire = False
>>
>>
>> ##############################################################################
>>
>> # This section specifies what reports, using which skins, to generate.
>>
>> [StdReport]
>>
>> # Where the skins reside, relative to WEEWX_ROOT
>> SKIN_ROOT = /etc/weewx/skins
>>
>> # Where the generated reports should go, relative to WEEWX_ROOT
>> HTML_ROOT = /f1/https/weewx
>>
>> # The database binding indicates which data should be used in reports.
>> data_binding = wx_binding
>>
>> # Whether to log a successful operation
>> log_success = True
>>
>> # Whether to log an unsuccessful operation
>> log_failure = True
>>
>> # Each of the following subsections defines a report that will be run.
>> # See the customizing guide to change the units, plot types and line
>> # colors, modify the fonts, display additional sensor data, and other
>> # customizations. Many of those changes can be made here by overriding
>> # parameters, or by modifying templates within the skin itself.
>>
>> [[SeasonsReport]]
>> # The SeasonsReport uses the 'Seasons' skin, which contains the
>> # images, templates and plots for the report.
>> skin = Seasons
>> enable = true
>>
>> [[SmartphoneReport]]
>> # The SmartphoneReport uses the 'Smartphone' skin, and the images
>> and
>> # files are placed in a dedicated subdirectory.
>> skin = Smartphone
>> enable = false
>> HTML_ROOT = /f1/https/weewx/smartphone
>>
>> [[MobileReport]]
>> # The MobileReport uses the 'Mobile' skin, and the images and
>> files
>> # are placed in a dedicated subdirectory.
>> skin = Mobile
>> enable = false
>> HTML_ROOT = /f1/https/weewx/mobile
>>
>> [[StandardReport]]
>> # This is the old "Standard" skin. By default, it is not enabled.
>> skin = Standard
>> enable = true
>> # [[Belchertown]]
>> # skin = Belchertown
>> # HTML_ROOT = /f1/https/weewx/belchertown
>>
>> [[FTP]]
>> # FTP'ing the results to a webserver is treated as just another
>> report,
>> # albeit one with an unusual report generator!
>> skin = Ftp
>>
>> # If you wish to use FTP, set "enable" to "true", then
>> # fill out the next four lines.
>> # Use quotes around passwords to guard against parsing errors.
>> enable = false
>> user = replace_me
>> password = replace_me
>> server = replace_me # The ftp server name, e.g,
>> www.myserver.org
>> path = replace_me # The destination directory, e.g., /weather
>>
>> # Set to True for an FTP over TLS (FTPS) connection. Not all
>> servers
>> # support this.
>> secure_ftp = False
>>
>> # To upload files from something other than what HTML_ROOT is set
>> # to above, specify a different HTML_ROOT here.
>> HTML_ROOT = /f1/https/weewx
>>
>> # Most FTP servers use port 21
>> port = 21
>>
>> # Set to 1 to use passive mode, zero for active mode
>> passive = 1
>>
>> [[RSYNC]]
>> # rsync'ing to a webserver is treated as just another report
>> skin = Rsync
>>
>> # If you wish to use rsync, you must configure passwordless ssh
>> using
>> # public/private key authentication from the user account that
>> weewx
>> # runs to the user account on the remote machine where the files
>> # will be copied.
>> #
>> # If you wish to use rsync, set "enable" to "true", then
>> # fill out server, user, and path.
>> # The server should appear in your .ssh/config file.
>> # The user is the username used in the identity file.
>> # The path is the destination directory, such as
>> /var/www/html/weather.
>> # Be sure that the user has write permissions on the destination!
>> enable = false
>> server = replace_me
>> user = replace_me
>> path = replace_me
>>
>> # To upload files from something other than what HTML_ROOT is set
>> # to above, specify a different HTML_ROOT here.
>> HTML_ROOT = /f1/https/weewx
>>
>> # Rsync can be configured to remove files from the remote server
>> if
>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if
>> you
>> # make a mistake in the remote path, you could could
>> unintentionally
>> # cause unrelated files to be deleted. Set to 1 to enable remote
>> file
>> # deletion, zero to allow files to accumulate remotely.
>> delete = 0
>>
>> ####
>>
>> # Various options for customizing your reports.
>>
>> [[Defaults]]
>>
>> [[[Units]]]
>>
>> # The following section sets what unit to use for each unit
>> group.
>> # NB: The unit is always in the singular. I.e.,
>> 'mile_per_hour',
>> # NOT 'miles_per_hour'
>> [[[[Groups]]]]
>>
>> group_altitude = foot # Options are 'foot' or 'meter'
>> group_degree_day = degree_F_day # Options are
>> 'degree_F_day' or 'degree_C_day'
>> group_distance = mile # Options are 'mile' or 'km'
>> group_pressure = inHg # Options are 'inHg', 'mmHg',
>> 'mbar', 'hPa', or 'kPa'
>> group_rain = inch # Options are 'inch', 'cm', or 'mm'
>> group_rainrate = inch_per_hour # Options are
>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>> group_speed = mile_per_hour # Options are
>> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
>> group_speed2 = mile_per_hour2 # Options are
>> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
>> group_temperature = degree_F # Options are 'degree_F'
>> or 'degree_C'
>>
>> # The following section sets the formatting for each type of
>> unit.
>> [[[[StringFormats]]]]
>>
>> centibar = %.0f
>> cm = %.2f
>> cm_per_hour = %.2f
>> degree_C = %.1f
>> degree_F = %.1f
>> degree_compass = %.0f
>> foot = %.0f
>> hPa = %.1f
>> hour = %.1f
>> inHg = %.3f
>> inch = %.2f
>> inch_per_hour = %.2f
>> km = %.1f
>> km_per_hour = %.0f
>> km_per_hour2 = %.1f
>> knot = %.0f
>> knot2 = %.1f
>> kPa = %.2f
>> mbar = %.1f
>> meter = %.0f
>> meter_per_second = %.1f
>> meter_per_second2 = %.1f
>> mile = %.1f
>> mile_per_hour = %.0f
>> mile_per_hour2 = %.1f
>> mm = %.1f
>> mmHg = %.1f
>> mm_per_hour = %.1f
>> percent = %.0f
>> second = %.0f
>> uv_index = %.1f
>> volt = %.1f
>> watt_per_meter_squared = %.0f
>> NONE = " N/A"
>>
>> # The following section overrides the label used for each
>> type of unit
>> [[[[Labels]]]]
>>
>> meter = " meter", " meters" # You may prefer "metre".
>> day = " day", " days"
>> hour = " hour", " hours"
>> minute = " minute", " minutes"
>> second = " second", " seconds"
>> NONE = ""
>>
>> # The following section sets the format for each time scale.
>> # The values below will work in every locale, but they may
>> not look
>> # particularly attractive.
>> [[[[TimeFormats]]]]
>>
>> hour = %H:%M
>> day = %X
>> week = %X (%A)
>> month = %x %X
>> year = %x %X
>> rainyear = %x %X
>> current = %x %X
>> ephem_day = %X
>> ephem_year = %x %X
>>
>> [[[[Ordinates]]]]
>>
>> # Ordinal directions. The last one is for no wind
>> direction
>> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW,
>> SW, WSW, W, WNW, NW, NNW, N/A
>>
>> # The following section sets the base temperatures used for
>> the
>> # calculation of heating, cooling, and growing degree-days.
>> [[[[DegreeDays]]]]
>>
>> # Base temperature for heating days, with unit:
>> heating_base = 65, degree_F
>> # Base temperature for cooling days, with unit:
>> cooling_base = 65, degree_F
>> # Base temperature for growing days, with unit:
>> growing_base = 50, degree_F
>>
>> # A trend takes a difference across a time period. The
>> following
>> # section sets the time period, and how big an error is
>> allowed to
>> # still be counted as the start or end of a period.
>> [[[[Trend]]]]
>>
>> time_delta = 10800 # 3 hours
>> time_grace = 300 # 5 minutes
>>
>> # The labels to be used for each observation type
>> [[[Labels]]]
>>
>> # Set to hemisphere abbreviations suitable for your location:
>> hemispheres = N, S, E, W
>>
>> # Formats to be used for latitude whole degrees, longitude
>> whole
>> # degrees, and minutes:
>> latlon_formats = %02d, %03d, %05.2f
>>
>> # Generic labels, keyed by an observation type.
>> [[[[Generic]]]]
>> barometer = Barometer
>> dewpoint = Dew Point
>> ET = ET
>> heatindex = Heat Index
>> inHumidity = Inside Humidity
>> inTemp = Inside Temperature
>> outHumidity = Humidity
>> outTemp = Outside Temperature
>> radiation = Radiation
>> rain = Rain
>> rainRate = Rain Rate
>> UV = UV Index
>> windDir = Wind Direction
>> windGust = Gust Speed
>> windGustDir = Gust Direction
>> windSpeed = Wind Speed
>> windchill = Wind Chill
>> windgustvec = Gust Vector
>> windvec = Wind Vector
>> extraTemp1 = Temperature1
>> extraTemp2 = Temperature2
>> extraTemp3 = Temperature3
>>
>> # Sensor status indicators
>>
>> rxCheckPercent = Signal Quality
>> txBatteryStatus = Transmitter Battery
>> windBatteryStatus = Wind Battery
>> rainBatteryStatus = Rain Battery
>> outTempBatteryStatus = Outside Temperature Battery
>> inTempBatteryStatus = Inside Temperature Battery
>> consBatteryVoltage = Console Battery
>> heatingVoltage = Heating Battery
>> supplyVoltage = Supply Voltage
>> referenceVoltage = Reference Voltage
>>
>> [[[Almanac]]]
>>
>> # The labels to be used for the phases of the moon:
>> moon_phases = New, Waxing crescent, First quarter, Waxing
>> gibbous, Full, Waning gibbous, Last quarter, Waning crescent
>>
>>
>> ##############################################################################
>>
>> # This service acts as a filter, converting the unit system coming from
>> # the hardware to a unit system in the database.
>>
>> [StdConvert]
>>
>> # The target_unit affects only the unit system in the database. Once
>> # chosen it cannot be changed without converting the entire database.
>> # Modification of target_unit after starting weewx will result in
>> # corrupt data - the database will contain a mix of US and METRIC
>> data.
>> #
>> # The value of target_unit does not affect the unit system for
>> # reporting - reports can display US, Metric, or any combination of
>> units.
>> #
>> # In most cases, target_unit should be left as the default: US
>> #
>> # In particular, those migrating from a standard wview installation
>> # should use US since that is what the wview database contains.
>>
>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>>
>>
>> ##############################################################################
>>
>> # This section can adjust data using calibration expressions.
>>
>> [StdCalibrate]
>>
>> [[Corrections]]
>> # For each type, an arbitrary calibration expression can be given.
>> # It should be in the units defined in the StdConvert section.
>> # Example:
>> foo = foo + 0.2
>>
>>
>> ##############################################################################
>>
>> # This section is for quality control checks. If units are not
>> specified,
>> # values must be in the units defined in the StdConvert section.
>>
>> [StdQC]
>>
>> [[MinMax]]
>> barometer = 26, 32.5, inHg
>> pressure = 24, 34.5, inHg
>> outTemp = -40, 120, degree_F
>> inTemp = 10, 120, degree_F
>> outHumidity = 0, 100
>> inHumidity = 0, 100
>> windSpeed = 0, 120, mile_per_hour
>> rain = 0, 10, inch
>>
>>
>> ##############################################################################
>>
>> # This section controls the origin of derived values.
>>
>> [StdWXCalculate]
>>
>> [[Calculations]]
>> # How to calculate derived quantities. Possible values are:
>> # hardware - use the value provided by hardware
>> # software - use the value calculated by weewx
>> # prefer_hardware - use value provide by hardware if available,
>> # otherwise use value calculated by weewx
>>
>> pressure = prefer_hardware
>> altimeter = prefer_hardware
>> appTemp = prefer_hardware
>> barometer = prefer_hardware
>> cloudbase = prefer_hardware
>> dewpoint = prefer_hardware
>> ET = prefer_hardware
>> heatindex = prefer_hardware
>> humidex = prefer_hardware
>> inDewpoint = prefer_hardware
>> maxSolarRad = prefer_hardware
>> rainRate = prefer_hardware
>> windchill = prefer_hardware
>> windrun = prefer_hardware
>>
>>
>> ##############################################################################
>>
>> # For hardware that supports it, this section controls how often the
>> # onboard clock gets updated.
>>
>> [StdTimeSynch]
>>
>> # How often to check the weather station clock for drift (in seconds)
>> clock_check = 14400
>>
>> # How much it can drift before we will correct it (in seconds)
>> max_drift = 5
>>
>>
>> ##############################################################################
>>
>> # This section is for configuring the archive service.
>>
>> [StdArchive]
>>
>> # If the station hardware supports data logging then the archive
>> interval
>> # will be downloaded from the station. Otherwise, specify it (in
>> seconds).
>> archive_interval = 300
>>
>> # If possible, new archive records are downloaded from the station
>> # hardware. If the hardware does not support this, then new archive
>> # records will be generated in software.
>> # Set the following to "software" to force software record generation.
>> record_generation = software
>>
>> # Whether to include LOOP data in hi/low statistics
>> loop_hilo = True
>>
>> # The data binding used to save archive records
>> data_binding = wx_binding
>>
>>
>> ##############################################################################
>>
>> # This section binds a data store to a database.
>>
>> [DataBindings]
>>
>> [[wx_binding]]
>> # The database must match one of the sections in [Databases].
>> # This is likely to be the only option you would want to change.
>> database = archive_mysql
>> # The name of the table within the database
>> table_name = archive
>> # The manager handles aggregation of data for historical summaries
>> manager = weewx.manager.DaySummaryManager
>> # The schema defines the structure of the database.
>> # It is *only* used when the database is created.
>> schema = schemas.wview_extended.schema
>>
>>
>> ##############################################################################
>>
>> # This section defines various databases.
>>
>> [Databases]
>>
>> # A SQLite database is simply a single file
>> [[archive_sqlite]]
>> database_name = weewx.sdb
>> database_type = SQLite
>>
>> # MySQL
>> [[archive_mysql]]
>> database_name = weewx
>> database_type = MySQL
>>
>>
>> ##############################################################################
>>
>> # This section defines defaults for the different types of databases.
>>
>> [DatabaseTypes]
>>
>> # Defaults for SQLite databases
>> [[SQLite]]
>> driver = weedb.sqlite
>> # Directory in which the database files are located
>> SQLITE_ROOT = /var/lib/weewx
>>
>> # Defaults for MySQL databases
>> [[MySQL]]
>> driver = weedb.mysql
>> # The host where the database is located
>> host = localhost
>> # The user name for logging in to the host
>> user = weewx
>> # The password for the user name (quotes guard against parsing
>> errors)
>> password = XXXXXXXXXXXX
>>
>>
>> ##############################################################################
>>
>> # This section configures the internal weewx engine.
>>
>> [Engine]
>>
>> # The following section specifies which services should be run and in
>> what order.
>> [[Services]]
>> prep_services = weewx.engine.StdTimeSynch
>> data_services = ,
>> process_services = weewx.engine.StdConvert,
>> weewx.engine.StdCalibrate, weewx.engine.StdQC,
>> weewx.wxservices.StdWXCalculate
>> xtype_services = weewx.wxxtypes.StdWXXTypes,
>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
>> weewx.wxxtypes.StdDelta
>> archive_services = weewx.engine.StdArchive
>> restful_services = weewx.restx.StdStationRegistry,
>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/c3c1dfc9-8896-4b37-a919-31afb6b01452n%40googlegroups.com.
