HI, I though about adding a BME, but I never tried because of the single loop issue. If I have 2 loops, I could hook back my WMR via USB which has a decent pressure sensor but does nto advertise it over 833MHz.
Maybe I should look into the weewx-multi. On Sunday, January 24, 2021 at 8:16:12 PM UTC+1 storm...@gmail.com wrote: > If you are running a RPI, you can use a BME280 Sensor. > > On Sunday, January 24, 2021 at 12:08:47 PM UTC-5 joewil...@gmail.com > wrote: > >> Hi All, >> >> I'm a newbie to weewx, and I have been able to set up weewx to monitor >> my weather station using SDR. All works great, but I would like to also >> get the barometer reading from the console back into weewx. >> >> My color console doesn't have a way to expose the internal sensor data >> (no usb/serial port), but the console has the ability to post data >> directly to Weather Underground, which includes the barometric readings >> (which I have been doing for the last couple of weeks). Im thinking these >> are my options at this point.. >> >> 1) get a sensor that works at 915.000MHz. that sends the barometric >> reading, and add it to my sensor map >> >> or >> >> 2) write a python script that logs into weather underground, and grabs >> the barometric reading (that was sent by my console), and stores it back >> into the SQLLite database... Not sure if anyone has done or thought of >> this. >> >> Like to do 1) if I can get a cheap sensor, but I can do 2) >> >> Thoughts? >> -Joe >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/421d49be-3119-43ac-a959-a1e2c0832b9en%40googlegroups.com.
