I set my fineoffset rule to:
SUBSYSTEM=="usb", ATTRS{idVendor}=="1941", ATTRS{idProduct}=="8021",
MODE="0666", GROUP="plugdev", SYMLINK+="weather"
That way it is always /dev/weather regardless of the ttyUsb it is attached
to.
ll /dev/weather
lrwxrwxrwx 1 root root 15 Nov 17 09:26 /dev/weather -> bus/usb/002/002
On Wednesday, 18 November 2020 at 12:14:53 UTC+11 tke...@gmail.com wrote:
> Are you sure? Depending on what permissions the usb port has, you may need
> to use sudo to run lsof:
>
> *sudo lsof /dev/ttyUSB0*
>
> Come to think of it, you may have to do that with minicom, too.
>
> Personally, I change the udev rule that governs permissions for usb
> devices to give everyone access to the port. The rule that governs this is
> most likely in the directory /lib/udev/rules.d, but which file it is in
> depends on the operating system. I believe on Raspbian, it's in file
> 91-permissions.rules, but it may be in 50-udev-default.rules. Wherever
> you find it, you want to change this
>
> SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
>
> to this
>
> SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0666"
>
>
> -tk
>
> On Tue, Nov 17, 2020 at 3:07 PM bgra...@umw.edu <bgra...@umw.edu> wrote:
>
>>
>> Thanks everyone, I think I have a bad logger (6540).
>> On Tuesday, November 17, 2020 at 9:41:56 AM UTC-5 bgra...@umw.edu wrote:
>>
>>> root@raspberrypi:/home/pi# ll /dev/ttyUSB0
>>> crw-rw---- 1 root dialout 188, 0 Nov 16 17:48 /dev/ttyUSB0
>>>
>>>
>>> root@raspberrypi:/home/pi# lsof /dev/ttyUSB0
>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system
>>> /run/user/1000/gvfs
>>> Output information may be incomplete.
>>>
>>> On Monday, November 16, 2020 at 8:43:34 PM UTC-5 tke...@gmail.com wrote:
>>>
>>>> If it were a permissions problem, it would have said so. Same if
>>>> modemmanager controlled the port. Still, it doesn't hurt to try lsof and
>>>> see if anything else is using the port.
>>>>
>>>> *lsof /dev/ttyUSB0*
>>>>
>>>>
>>>>
>>>>
>>>> On Mon, Nov 16, 2020 at 5:36 PM Greg from Oz <ubea...@gmail.com> wrote:
>>>>
>>>>> Is the user running this in the dialout group?
>>>>>
>>>>> On Tuesday, 17 November 2020 at 12:30:14 UTC+11 tke...@gmail.com
>>>>> wrote:
>>>>>
>>>>>> The only thing I can think of to try is to reseat the logger.
>>>>>>
>>>>>> Unless, you actually have the serial version of the VantagePro and
>>>>>> are using a serial-to-usb converter. They are notoriously flakey. If you
>>>>>> have a spare one, try that.
>>>>>>
>>>>>> If none of that works, call Davis.
>>>>>>
>>>>>> On Mon, Nov 16, 2020 at 5:04 PM bgra...@umw.edu <bgra...@umw.edu>
>>>>>> wrote:
>>>>>>
>>>>>>> Yes, I did hit enter many times. Since dmesg said that the usb had
>>>>>>> attached to ttyUSB0 then I assumed (maybe incorrectly) the rpi had
>>>>>>> connected. I’m at a loss because everything was working... Thanks.
>>>>>>>
>>>>>>> On Monday, November 16, 2020 at 7:59:54 PM UTC-5 tke...@gmail.com
>>>>>>> wrote:
>>>>>>>
>>>>>>>> OK, but did you hit <enter> a few times before typing "TEST"? If
>>>>>>>> so, you have a connectivity problem, not a WeeWX problem.
>>>>>>>>
>>>>>>>> But, you probably already knew that!
>>>>>>>>
>>>>>>>> -tk
>>>>>>>>
>>>>>>>> On Mon, Nov 16, 2020 at 4:57 PM bgra...@umw.edu <bgra...@umw.edu>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>>
>>>>>>>>> I don’t remember the minicom string but it was the one posted to
>>>>>>>>> test TEST. When I opened minicom it just sat there no echo on TEST or
>>>>>>>>> VER.
>>>>>>>>> No reply. Several reboots no results. /dev/ttyUSB0 is there but does
>>>>>>>>> not
>>>>>>>>> respond. Dmesg Seems to have found it.
>>>>>>>>> I checked all plugs and connections. Removed batteries from
>>>>>>>>> console to reboot. Even tried new RS232/USB dongle. I have a main
>>>>>>>>> ubuntu
>>>>>>>>> linux pc running from the ISS so I know that’s working and sending
>>>>>>>>> data.
>>>>>>>>> The rpi is setup as a second console which was running weather34.
>>>>>>>>> Thanks
>>>>>>>>> Tom and Graham (you helped me in the days of wview).
>>>>>>>>> Bob
>>>>>>>>> Main setup: grattans.org/wx
>>>>>>>>> On Monday, November 16, 2020 at 6:43:17 PM UTC-5 tke...@gmail.com
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> When you say you "tried listening to the console with minicom
>>>>>>>>>> but got no data" what do you mean?
>>>>>>>>>>
>>>>>>>>>> In particular, did you set the baudrate? And, did you type
>>>>>>>>>> <enter> a few types before trying to type TEST?
>>>>>>>>>>
>>>>>>>>>> -tk
>>>>>>>>>>
>>>>>>>>>> On Mon, Nov 16, 2020 at 2:55 PM bgra...@umw.edu <bgra...@umw.edu>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> I have a VP2 console that I am connecting to an RPI OS (latest).
>>>>>>>>>>> Weewx is latest using setup.py. This RPI was running weewx (jessie)
>>>>>>>>>>> with no
>>>>>>>>>>> problems and using ttyUSB0 from weewx.conf. The vantage driver
>>>>>>>>>>> seems ok and
>>>>>>>>>>> I actually moved the old one over to be sure.
>>>>>>>>>>> I tried listening to the console with minicom but got no data. I
>>>>>>>>>>> swapped out the RS232/USB converter but got the same problem. Not
>>>>>>>>>>> sure
>>>>>>>>>>> what I have done wrong, other than trying to fix something that
>>>>>>>>>>> wasn't
>>>>>>>>>>> broken...
>>>>>>>>>>>
>>>>>>>>>>> Attached file of some debug info.
>>>>>>>>>>>
>>>>>>>>>>> Thanks for any suggestions.
>>>>>>>>>>>
>>>>>>>>>>> Bob
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/328d0e08-16f5-461c-8782-f6ee86e95008n%40googlegroups.com
>>>>>>>>>>>
>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/328d0e08-16f5-461c-8782-f6ee86e95008n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>
>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/4dea6744-d613-45ad-90f9-46fdf04ceb7an%40googlegroups.com
>>>>>>>>>
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/4dea6744-d613-45ad-90f9-46fdf04ceb7an%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>
>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/weewx-user/8afb9f09-184c-4244-ab5a-1590174ab7c0n%40googlegroups.com
>>>>>>>
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/8afb9f09-184c-4244-ab5a-1590174ab7c0n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to weewx-user+...@googlegroups.com.
>>>>>
>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/1af9c85d-756c-47ed-a88b-53526b5e9ed5n%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/1af9c85d-756c-47ed-a88b-53526b5e9ed5n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+...@googlegroups.com.
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/ddabe3bd-8728-4901-bde9-fe63c882536dn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/ddabe3bd-8728-4901-bde9-fe63c882536dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/fd0f7e6e-4706-4ee6-bf50-42c8e3923f2cn%40googlegroups.com.
