Thanks everyone, I think I have a bad logger (6540). On Tuesday, November 17, 2020 at 9:41:56 AM UTC-5 bgra...@umw.edu wrote:
> root@raspberrypi:/home/pi# ll /dev/ttyUSB0 > crw-rw---- 1 root dialout 188, 0 Nov 16 17:48 /dev/ttyUSB0 > > > root@raspberrypi:/home/pi# lsof /dev/ttyUSB0 > lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs > Output information may be incomplete. > > On Monday, November 16, 2020 at 8:43:34 PM UTC-5 tke...@gmail.com wrote: > >> If it were a permissions problem, it would have said so. Same if >> modemmanager controlled the port. Still, it doesn't hurt to try lsof and >> see if anything else is using the port. >> >> *lsof /dev/ttyUSB0* >> >> >> >> >> On Mon, Nov 16, 2020 at 5:36 PM Greg from Oz <ubea...@gmail.com> wrote: >> >>> Is the user running this in the dialout group? >>> >>> On Tuesday, 17 November 2020 at 12:30:14 UTC+11 tke...@gmail.com wrote: >>> >>>> The only thing I can think of to try is to reseat the logger. >>>> >>>> Unless, you actually have the serial version of the VantagePro and are >>>> using a serial-to-usb converter. They are notoriously flakey. If you have >>>> a >>>> spare one, try that. >>>> >>>> If none of that works, call Davis. >>>> >>>> On Mon, Nov 16, 2020 at 5:04 PM bgra...@umw.edu <bgra...@umw.edu> >>>> wrote: >>>> >>>>> Yes, I did hit enter many times. Since dmesg said that the usb had >>>>> attached to ttyUSB0 then I assumed (maybe incorrectly) the rpi had >>>>> connected. I’m at a loss because everything was working... Thanks. >>>>> >>>>> On Monday, November 16, 2020 at 7:59:54 PM UTC-5 tke...@gmail.com >>>>> wrote: >>>>> >>>>>> OK, but did you hit <enter> a few times before typing "TEST"? If so, >>>>>> you have a connectivity problem, not a WeeWX problem. >>>>>> >>>>>> But, you probably already knew that! >>>>>> >>>>>> -tk >>>>>> >>>>>> On Mon, Nov 16, 2020 at 4:57 PM bgra...@umw.edu <bgra...@umw.edu> >>>>>> wrote: >>>>>> >>>>>>> >>>>>>> I don’t remember the minicom string but it was the one posted to >>>>>>> test TEST. When I opened minicom it just sat there no echo on TEST or >>>>>>> VER. >>>>>>> No reply. Several reboots no results. /dev/ttyUSB0 is there but does >>>>>>> not >>>>>>> respond. Dmesg Seems to have found it. >>>>>>> I checked all plugs and connections. Removed batteries from console >>>>>>> to reboot. Even tried new RS232/USB dongle. I have a main ubuntu linux >>>>>>> pc >>>>>>> running from the ISS so I know that’s working and sending data. The rpi >>>>>>> is >>>>>>> setup as a second console which was running weather34. Thanks Tom and >>>>>>> Graham (you helped me in the days of wview). >>>>>>> Bob >>>>>>> Main setup: grattans.org/wx >>>>>>> On Monday, November 16, 2020 at 6:43:17 PM UTC-5 tke...@gmail.com >>>>>>> wrote: >>>>>>> >>>>>>>> When you say you "tried listening to the console with minicom but >>>>>>>> got no data" what do you mean? >>>>>>>> >>>>>>>> In particular, did you set the baudrate? And, did you type <enter> >>>>>>>> a few types before trying to type TEST? >>>>>>>> >>>>>>>> -tk >>>>>>>> >>>>>>>> On Mon, Nov 16, 2020 at 2:55 PM bgra...@umw.edu <bgra...@umw.edu> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> I have a VP2 console that I am connecting to an RPI OS (latest). >>>>>>>>> Weewx is latest using setup.py. This RPI was running weewx (jessie) >>>>>>>>> with no >>>>>>>>> problems and using ttyUSB0 from weewx.conf. The vantage driver seems >>>>>>>>> ok and >>>>>>>>> I actually moved the old one over to be sure. >>>>>>>>> I tried listening to the console with minicom but got no data. I >>>>>>>>> swapped out the RS232/USB converter but got the same problem. Not >>>>>>>>> sure >>>>>>>>> what I have done wrong, other than trying to fix something that >>>>>>>>> wasn't >>>>>>>>> broken... >>>>>>>>> >>>>>>>>> Attached file of some debug info. >>>>>>>>> >>>>>>>>> Thanks for any suggestions. >>>>>>>>> >>>>>>>>> Bob >>>>>>>>> >>>>>>>>> -- >>>>>>>>> >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/328d0e08-16f5-461c-8782-f6ee86e95008n%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/328d0e08-16f5-461c-8782-f6ee86e95008n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/4dea6744-d613-45ad-90f9-46fdf04ceb7an%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/4dea6744-d613-45ad-90f9-46fdf04ceb7an%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/8afb9f09-184c-4244-ab5a-1590174ab7c0n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/8afb9f09-184c-4244-ab5a-1590174ab7c0n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/1af9c85d-756c-47ed-a88b-53526b5e9ed5n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/1af9c85d-756c-47ed-a88b-53526b5e9ed5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ddabe3bd-8728-4901-bde9-fe63c882536dn%40googlegroups.com.
