Yes, works with the script from my above reply with curl.... on raspberry pi4 debian 10
jerry...@gmail.com schrieb am Dienstag, 6. Oktober 2020 um 21:01:31 UTC+2: > I'm curious if the curl command works to restart WiFiLogger2. I first > tried using the lynx command line browser and it did not resolve the page > correctly and didn't restart. I assumed that was because the restart page > contains some javascript and lynx doesn't support javascript. I then > switched to Safari, which has the downside of needing a GUI. > > So does curl work in the terminal script? That's a better solution if it > works. > > On Tuesday, October 6, 2020 at 6:37:57 AM UTC-7 gary....@gmail.com wrote: > >> Thanks for the Linux version of the script. >> >> On Tuesday, October 6, 2020 at 4:33:35 AM UTC-4 mh081...@gmail.com wrote: >> >>> Thanks for the script. I changed it to be runnable from raspberry pi >>> (Debian 10.4) >>> >>> #!/bin/sh >>> # Shell script to restart the weatherLogger wifi device in the Davis >>> Vantage Pro 2 in the Harbormaster Building >>> # The weather logger tends to disconnect from network every 4 days >>> causing weewx to crash in a waiting state >>> # Currently set to run by rycweather as a cron job once a day at 8:07 am. >>> # check to see if weatherLogger is connected on Harbormaster vlan >>> /bin/ping -c 1 WiFiLogger.fritz.box >>> if [ "$?" = "0" ]; then >>> weatherLoggerStatus="weatherLogger is online" >>> # Using curl >>> curl --connect-timeout 5 --fail >>> http://WiFiLogger.fritz.box/admin/restart >>> # wait to launch and load javascript function of URL >>> sleep 30 >>> else >>> weatherLoggerStatus="weatherLogger is OFFLINE" >>> fi >>> # Check weatherLogger is connected again >>> /bin/ping -c 1 WiFiLogger.fritz.box >>> if [ "$?" = "0" ]; then >>> newWeatherLoggerStatus="weatherlogger is back online" >>> else >>> newWeatherLoggerStatus="weatherLogger is OFFLINE after restart" >>> fi >>> echo "$weatherLoggerStatus and after restart $newWeatherLoggerStatus" | >>> sendemail -f mailadr...@mail.com -t mailad...@mail.com -u "WifiLogger >>> Restart" -s mailserver.mail.com -xu "username" -xp "password" -o >>> tls=yes -o message-content-type=auto >>> exit >>> >>> >>> jerry...@gmail.com schrieb am Dienstag, 6. Oktober 2020 um 09:36:22 >>> UTC+2: >>> >>>> WifiLogger2 doesn't have an ssh port open, but it does respond on port >>>> 80 to a restart command from http. Under macOS I use the shell script >>>> command to open the Safair browser to the restart javascript command. >>>> #!/bin/sh >>>> # Shell script to restart the weatherLogger wifi device in the Davis >>>> Vantage Pro 2 in the Harbormaster Building >>>> # The weather logger tends to disconnect from network every 4 days >>>> causing weewx to crash in a waiting state >>>> # Currently set to run by rycweather as a cron job once a day at 8:07 >>>> am. >>>> # check to see if weatherLogger is connected on Harbormaster vlan >>>> /sbin/ping -c 1 192.168.145.106 >>>> if [[ "$?" == "0" ]]; then >>>> weatherLoggerStatus="weatherLogger is online" >>>> # Using Safari browser >>>> open -a Safari http://192.168.145.106/admin/restart >>>> # wait for Safari to launch and load javascript function of URL >>>> sleep 60 >>>> # close Safari >>>> killall Safari >>>> else >>>> weatherLoggerStatus="weatherLogger is OFFLINE" >>>> fi >>>> # Check weatherLogger is connected again >>>> /sbin/ping -c 1 192.168.145.106 >>>> if [[ "$?" == "0" ]]; then >>>> newWeatherLoggerStatus="weatherlogger is back online" >>>> else >>>> newWeatherLoggerStatus="weatherLogger is OFFLINE after restart" >>>> fi >>>> echo "$weatherLoggerStatus and after restart $newWeatherLoggerStatus" | >>>> mail -s "weatherLogger restart" xxx >>>> exit >>>> >>>> >>>> On Tuesday, October 6, 2020 at 12:23:03 AM UTC-7 mh081...@gmail.com >>>> wrote: >>>> >>>>> Hi, >>>>> >>>>> can you provide me this shell script to restart WifiLogger2 by cron? >>>>> How did you connect to WifiLogger2 remotely? I have the same problem that >>>>> WifiLogger2 disconnects from wlan after several days. >>>>> >>>>> jerry...@gmail.com schrieb am Dienstag, 6. Oktober 2020 um 09:15:11 >>>>> UTC+2: >>>>> >>>>>> I recently switched from a 3 hop retransmit across 1000 ft by >>>>>> multiple Davis Vantage Pro2 links to WiFiLogger2 across an AirMax >>>>>> backhaul >>>>>> and the weewx server has been running well for several months. I had >>>>>> one >>>>>> problem with the WiFiLogger2. It seemed to disconnect from its vLAN >>>>>> network every 4 days or so, which caused weewx to going into a waiting >>>>>> mode >>>>>> and not reconnect. WiFiLogger2 eventually reconnects after about 2 >>>>>> hours, >>>>>> but weewx needs to be restarted after that. I fixed this problem by >>>>>> running a short shell script as a cron job once a day to restart >>>>>> WiFiLogger2. WifiLogger2 has been stable if restarted once a day. >>>>>> >>>>>> WifiLogger2 replaced a Davis Weather Envoy 6316 with a USB >>>>>> interface. I found the 6316 would freeze every 8 days (running 5 minute >>>>>> update intervals). This was the case under WeatherLink for Windows, >>>>>> WeatherLink for Mac, and Weewx. Must be the USB driver. Again, a cron >>>>>> job >>>>>> to restart weewx (or the other programs) every 7 days fixed the problem. >>>>>> Wojtek at WiFiLogger2 has been very responsive in helping to trouble >>>>>> shoot the disconnect issues. I am happy with WiFiLogger2. >>>>>> >>>>>> >>>>>> >>>>>> On Monday, October 5, 2020 at 12:58:45 PM UTC-7 gary....@gmail.com >>>>>> wrote: >>>>>> >>>>>>> I am thinking of upgrading my PWS to a Davis 6163. >>>>>>> To get the data into WeeWX, I am looking at two devices. >>>>>>> The Davis 6100 (WLL) or the WiFiLogger2 >>>>>>> >>>>>>> I can find no real information about the WLL an local LAN. >>>>>>> I see a couple of user created drivers for the WLL and WeeWX, but >>>>>>> they seem to have issues. >>>>>>> >>>>>>> The WiFiLogger2 has the ability to be used as a data logger via WiFi >>>>>>> or it can provide a MQTT feed. >>>>>>> >>>>>>> Why the WLL or WiFiLogger? I don't wish to have my console located >>>>>>> with my WeeWX server. >>>>>>> >>>>>>> Any feedback on either device? >>>>>>> I'd like to move forward, but if I can't get my data into WeeWX, >>>>>>> then it's a non-starter. >>>>>>> >>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/cd4a3fc7-8a51-44ec-b1cd-895424fc9889n%40googlegroups.com.
