Hi, can you provide me this shell script to restart WifiLogger2 by cron? How did you connect to WifiLogger2 remotely? I have the same problem that WifiLogger2 disconnects from wlan after several days.
jerry...@gmail.com schrieb am Dienstag, 6. Oktober 2020 um 09:15:11 UTC+2: > I recently switched from a 3 hop retransmit across 1000 ft by multiple > Davis Vantage Pro2 links to WiFiLogger2 across an AirMax backhaul and the > weewx server has been running well for several months. I had one problem > with the WiFiLogger2. It seemed to disconnect from its vLAN network every > 4 days or so, which caused weewx to going into a waiting mode and not > reconnect. WiFiLogger2 eventually reconnects after about 2 hours, but > weewx needs to be restarted after that. I fixed this problem by running a > short shell script as a cron job once a day to restart WiFiLogger2. > WifiLogger2 has been stable if restarted once a day. > > WifiLogger2 replaced a Davis Weather Envoy 6316 with a USB interface. I > found the 6316 would freeze every 8 days (running 5 minute update > intervals). This was the case under WeatherLink for Windows, WeatherLink > for Mac, and Weewx. Must be the USB driver. Again, a cron job to restart > weewx (or the other programs) every 7 days fixed the problem. > Wojtek at WiFiLogger2 has been very responsive in helping to trouble shoot > the disconnect issues. I am happy with WiFiLogger2. > > > > On Monday, October 5, 2020 at 12:58:45 PM UTC-7 gary....@gmail.com wrote: > >> I am thinking of upgrading my PWS to a Davis 6163. >> To get the data into WeeWX, I am looking at two devices. >> The Davis 6100 (WLL) or the WiFiLogger2 >> >> I can find no real information about the WLL an local LAN. >> I see a couple of user created drivers for the WLL and WeeWX, but they >> seem to have issues. >> >> The WiFiLogger2 has the ability to be used as a data logger via WiFi or >> it can provide a MQTT feed. >> >> Why the WLL or WiFiLogger? I don't wish to have my console located with >> my WeeWX server. >> >> Any feedback on either device? >> I'd like to move forward, but if I can't get my data into WeeWX, then >> it's a non-starter. >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a867f13d-c88a-4d4b-9da5-4e02eeecc0a7n%40googlegroups.com.
