Also tested
device_type = ecowitt-client
Nothing new in syslog, but in the tcp dump I see weather data sent as http
post and Interceptor is responding
Error code 400
Bad HTTP/0.9 request type ('POST').
<
On Wednesday, 16 September 2020 at 16:13:35 UTC+3 Ville Westerholm wrote:
> I turned on debugging in weewx seeing the following messages:
> Sep 16 16:04:14 fuji weewx[23780]: message repeated 2 times: [
> interceptor: MainThread: empty queue]
> Sep 16 16:04:14 fuji weewx[23780]: interceptor: ServerThread: GET:
> Sep 16 16:04:14 fuji weewx[23780]: interceptor: MainThread: raw data:
> Sep 16 16:04:14 fuji weewx[23780]: interceptor: MainThread: raw packet:
> {'usUnits': 1, 'dateTime': 1600261455}
> Sep 16 16:04:14 fuji weewx[23780]: interceptor: MainThread: mapped packet:
> {'usUnits': 1, 'dateTime': 1600261455}
> That is, basically same as when running Interceptor in the debug mode
>
> Then I captured network data with tcpdump -A (extract from the dump, fuji
> is weewx server and ESP-07209F is the weather station, 8089 is now the port
> I am testing):
> 16:00:44.662596 IP ESP-07209F.fritz.box.13045 > fuji.fritz.box.8089:
> .GET ID=id&PASSWORD=key&indoortempf=71.6&tempf=61.7. ...
> &dateutc=2020-09-16%2013:00:43&softwaretype=EasyWeatherV1.5.3&action=updateraw&realtime=1&rtfreq=5
>
> HTTP/1.0...
> ...
> Connection: Close
> 16:00:44.662716 IP fuji.fritz.box.8089 > ESP-07209F.fritz.box.13045:
> E..
> 16:00:44.664764 IP fuji.fritz.box.8089 > ESP-07209F.fritz.box.13045:
> ..HTTP/1.0 200 OK
> ...
> So, weather station is sending info and interceptor is responding OK.
> Problem in Interceptor?
> On Wednesday, 16 September 2020 at 14:08:06 UTC+3 Ville Westerholm wrote:
>
>> Configuration
>>
>> - Froggit WH4000SE, firmware updated yesterday
>> - Connected using Wunderground simulator,
>> - path: (empty)
>> - port: 8081
>> - Station id: id,
>> - Station key: key
>> - port: 8081
>> - WeeWx versio 3.9.2-1
>> - Using Interceptor (updated today)
>> - device_type: wu-client
>> - port: 8081
>>
>> This configuration was working ok until last week when no data was update
>> in weewx. Short analysis showed WH4000 was not any more seen in the mobile
>> app used to configure the device (WS View).
>>
>> I reconfigured the device. This worked only after disabling 5 Ghz Wifi
>> network (this might have been the original reason for my problems).
>>
>> After this sending of weather data to Ecowitt and Weather Underground was
>> restored.
>> But still no data was received in weewx. I played around using different
>> wunderground simulator parameters in WS View (I do not have record of the
>> original working ones). No help. The last test was to run interceptor in
>> the debug mode. I saw only the following messages:
>> raw packet: {'usUnits': 1, 'dateTime': 1600253325}
>> mapped packet: {'usUnits': 1, 'dateTime': 1600253325}
>>
>> To me this look like WH4000 is not sending any weather data any more
>> using underground simulator. Anybody, any ideas?
>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d44c539d-8711-4bdd-8c7c-85000460bf3bn%40googlegroups.com.
