I turned on debugging in weewx seeing the following messages:
Sep 16 16:04:14 fuji weewx[23780]: message repeated 2 times: [ interceptor:
MainThread: empty queue]
Sep 16 16:04:14 fuji weewx[23780]: interceptor: ServerThread: GET:
Sep 16 16:04:14 fuji weewx[23780]: interceptor: MainThread: raw data:
Sep 16 16:04:14 fuji weewx[23780]: interceptor: MainThread: raw packet:
{'usUnits': 1, 'dateTime': 1600261455}
Sep 16 16:04:14 fuji weewx[23780]: interceptor: MainThread: mapped packet:
{'usUnits': 1, 'dateTime': 1600261455}
That is, basically same as when running Interceptor in the debug mode
Then I captured network data with tcpdump -A (extract from the dump, fuji
is weewx server and ESP-07209F is the weather station, 8089 is now the port
I am testing):
16:00:44.662596 IP ESP-07209F.fritz.box.13045 > fuji.fritz.box.8089:
.GET ID=id&PASSWORD=key&indoortempf=71.6&tempf=61.7. ...
&dateutc=2020-09-16%2013:00:43&softwaretype=EasyWeatherV1.5.3&action=updateraw&realtime=1&rtfreq=5
HTTP/1.0...
...
Connection: Close
16:00:44.662716 IP fuji.fritz.box.8089 > ESP-07209F.fritz.box.13045:
E..
16:00:44.664764 IP fuji.fritz.box.8089 > ESP-07209F.fritz.box.13045:
..HTTP/1.0 200 OK
...
So, weather station is sending info and interceptor is responding OK.
Problem in Interceptor?
On Wednesday, 16 September 2020 at 14:08:06 UTC+3 Ville Westerholm wrote:
> Configuration
>
> - Froggit WH4000SE, firmware updated yesterday
> - Connected using Wunderground simulator,
> - path: (empty)
> - port: 8081
> - Station id: id,
> - Station key: key
> - port: 8081
> - WeeWx versio 3.9.2-1
> - Using Interceptor (updated today)
> - device_type: wu-client
> - port: 8081
>
> This configuration was working ok until last week when no data was update
> in weewx. Short analysis showed WH4000 was not any more seen in the mobile
> app used to configure the device (WS View).
>
> I reconfigured the device. This worked only after disabling 5 Ghz Wifi
> network (this might have been the original reason for my problems).
>
> After this sending of weather data to Ecowitt and Weather Underground was
> restored.
> But still no data was received in weewx. I played around using different
> wunderground simulator parameters in WS View (I do not have record of the
> original working ones). No help. The last test was to run interceptor in
> the debug mode. I saw only the following messages:
> raw packet: {'usUnits': 1, 'dateTime': 1600253325}
> mapped packet: {'usUnits': 1, 'dateTime': 1600253325}
>
> To me this look like WH4000 is not sending any weather data any more using
> underground simulator. Anybody, any ideas?
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/dd34712b-d194-4a72-acff-f88d8a7b04e4n%40googlegroups.com.
