I am not sure if this impacts on the WH65 issue mentioned below but I now have the driver distinguishing whether there is a WH65 or WH24 connected to the GW1000. This will (I hope) have a flow on affect on battery status fields but given the manner in which the API works I don't believe it will impact any weather related observations. I should have b6 in the next couple of days.
Gary On Saturday, 25 July 2020 04:50:38 UTC+10, steeple ian wrote: > > That’s exactly what I am seeing. I am going to look at the interceptor map > for WH65 and see where things appear to deviate. > > On Fri, 24 Jul 2020 at 19:43, Bill Arthur wrote: > >> I started as you and later added a WiFi-less console. I'm not sure where >> to look for the WH65 designation. >> No, I didn't change the map. I was unable to run the driver directly to >> test, so I just launched it blindly... and it worked. >> I am seeing an anomaly with pressure, too. I'm looking at the output as >> reported to CWOP. I'm seeing 989mb where I expect 1019mb >> So...I have some work to do. >> On Friday, July 24, 2020 at 1:28:27 PM UTC-5 steep...@gmail.com wrote: >> >>> That is the same array that I am using with gw1000 except I do not have >>> a console. Does this show up as WH65? I have anomaly with the barometer but >>> I cannot understand why. Have you changed the sensor map at all? >>> >>> >>> On Fri, 24 Jul 2020 at 19:17, Bill Arthur <wa4...@gmail.com> wrote: >>> >>>> Hi Ian, >>>> I have the Ambient Weather WS-2902 array: temperature, rainfall, >>>> humidity, wind speed & direction, UV and solar. Indoor and pressure is >>>> from the GW-1000 >>>> >>>> On Friday, July 24, 2020 at 1:07:41 PM UTC-5 steep...@gmail.com wrote: >>>> >>>>> Hi Bill, >>>>> What sensors do you have connected? >>>>> >>>>> On Fri, 24 Jul 2020 at 19:06, Bill Arthur <wa4...@gmail.com> wrote: >>>>> >>>>>> Ian, >>>>>> Yes, just the simple Seasons skin for now. I now have 12 hours of >>>>>> data and it's looking good. >>>>>> I've compared it to my weather station console and the data all looks >>>>>> correct. >>>>>> >>>>>> On Friday, July 24, 2020 at 12:56:01 PM UTC-5 steep...@gmail.com >>>>>> wrote: >>>>>> >>>>>>> Hi Bill, >>>>>>> No need to be sorry. Just wanted to exchange notes on experiences. I >>>>>>> assume you then using the default Seasons skin. How is that looking? >>>>>>> Ian >>>>>>> >>>>>>> On Fri, 24 Jul 2020 at 18:12, Bill Arthur <wa4...@gmail.com> wrote: >>>>>>> >>>>>>>> Hi Ian >>>>>>>> No, I don't have Weather34 on the RasPi that I'm testing the GW1000 >>>>>>>> extension, it's a fresh install. >>>>>>>> It'll be a while until I'm ready to modify the RasPi that has >>>>>>>> Weather34. Sorry. >>>>>>>> >>>>>>>> On Friday, July 24, 2020 at 10:09:08 AM UTC-5 steep...@gmail.com >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Hi Bill, >>>>>>>>> >>>>>>>>> Are you still using the Weather34 skin. If so, I am interested >>>>>>>>> what barometer reading you are displaying when using the gw1000 >>>>>>>>> driver. >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> Ian >>>>>>>>> >>>>>>>>> >>>>>>>>> On Friday, July 24, 2020 at 4:02:17 AM UTC+1, Bill Arthur wrote: >>>>>>>>>> >>>>>>>>>> I couldn't get it to run from the command line. >>>>>>>>>> When I did python -m user.gw1000 --help >>>>>>>>>> I get /usr/bin/python: No module named user.gw1000 >>>>>>>>>> >>>>>>>>>> But I have it up and running, everything looks good on my Seasons >>>>>>>>>> page. >>>>>>>>>> I'll give the data a closer look tomorrow. >>>>>>>>>> >>>>>>>>>> But I'm scratching my head trying to find how to specify the IP >>>>>>>>>> address in weewx.conf >>>>>>>>>> I have three GW1000s here, I have no idea which one is being >>>>>>>>>> used >>>>>>>>>> On Thursday, July 23, 2020 at 9:06:47 PM UTC-5 Bill Arthur wrote: >>>>>>>>>> >>>>>>>>>>> This link works: >>>>>>>>>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.1.0b4/gw1000-0.1.0b4.tar.gz >>>>>>>>>>> >>>>>>>>>>> On Thursday, July 23, 2020 at 8:57:49 PM UTC-5 Bill Arthur wrote: >>>>>>>>>>> >>>>>>>>>>>> FYI: >>>>>>>>>>>> wget -P /var/tmp >>>>>>>>>>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.1.0b4/weewx-gw1000-0.1.0b4.tar.gz >>>>>>>>>>>> >>>>>>>>>>>> gives me an Error 404 >>>>>>>>>>>> >>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4297800f-cd83-414a-aa3a-9e395c9f599co%40googlegroups.com.
