Bill About not being able to run the driver directly, If you have python 2 on your system, but have installed WeeWX to use python 3 you may not have installed the prerequisites for python 2. If you have a setup.py install and try to run: PYTHONPATH=/home/weewx/bin python -m user.gw1000 --test-driver You will get an error message that includes "ImportError: No module named configobj" What you can do is specify python 3 on the command and it should run fine: PYTHONPATH=/home/weewx/bin python3 -m user.gw1000 --test-driver
Have Fun! Paul On Friday, July 24, 2020 at 2:43:30 PM UTC-4 wa4...@gmail.com wrote: > I started as you and later added a WiFi-less console. I'm not sure where > to look for the WH65 designation. > No, I didn't change the map. I was unable to run the driver directly to > test, so I just launched it blindly... and it worked. > I am seeing an anomaly with pressure, too. I'm looking at the output as > reported to CWOP. I'm seeing 989mb where I expect 1019mb > So...I have some work to do. > On Friday, July 24, 2020 at 1:28:27 PM UTC-5 steep...@gmail.com wrote: > >> That is the same array that I am using with gw1000 except I do not have a >> console. Does this show up as WH65? I have anomaly with the barometer but I >> cannot understand why. Have you changed the sensor map at all? >> >> >> On Fri, 24 Jul 2020 at 19:17, Bill Arthur <wa4...@gmail.com> wrote: >> >>> Hi Ian, >>> I have the Ambient Weather WS-2902 array: temperature, rainfall, >>> humidity, wind speed & direction, UV and solar. Indoor and pressure is >>> from the GW-1000 >>> >>> On Friday, July 24, 2020 at 1:07:41 PM UTC-5 steep...@gmail.com wrote: >>> >>>> Hi Bill, >>>> What sensors do you have connected? >>>> >>>> On Fri, 24 Jul 2020 at 19:06, Bill Arthur <wa4...@gmail.com> wrote: >>>> >>>>> Ian, >>>>> Yes, just the simple Seasons skin for now. I now have 12 hours of data >>>>> and it's looking good. >>>>> I've compared it to my weather station console and the data all looks >>>>> correct. >>>>> >>>>> On Friday, July 24, 2020 at 12:56:01 PM UTC-5 steep...@gmail.com >>>>> wrote: >>>>> >>>>>> Hi Bill, >>>>>> No need to be sorry. Just wanted to exchange notes on experiences. I >>>>>> assume you then using the default Seasons skin. How is that looking? >>>>>> Ian >>>>>> >>>>>> On Fri, 24 Jul 2020 at 18:12, Bill Arthur <wa4...@gmail.com> wrote: >>>>>> >>>>>>> Hi Ian >>>>>>> No, I don't have Weather34 on the RasPi that I'm testing the GW1000 >>>>>>> extension, it's a fresh install. >>>>>>> It'll be a while until I'm ready to modify the RasPi that has >>>>>>> Weather34. Sorry. >>>>>>> >>>>>>> On Friday, July 24, 2020 at 10:09:08 AM UTC-5 steep...@gmail.com >>>>>>> wrote: >>>>>>> >>>>>>>> Hi Bill, >>>>>>>> >>>>>>>> Are you still using the Weather34 skin. If so, I am interested what >>>>>>>> barometer reading you are displaying when using the gw1000 driver. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Ian >>>>>>>> >>>>>>>> >>>>>>>> On Friday, July 24, 2020 at 4:02:17 AM UTC+1, Bill Arthur wrote: >>>>>>>>> >>>>>>>>> I couldn't get it to run from the command line. >>>>>>>>> When I did python -m user.gw1000 --help >>>>>>>>> I get /usr/bin/python: No module named user.gw1000 >>>>>>>>> >>>>>>>>> But I have it up and running, everything looks good on my Seasons >>>>>>>>> page. >>>>>>>>> I'll give the data a closer look tomorrow. >>>>>>>>> >>>>>>>>> But I'm scratching my head trying to find how to specify the IP >>>>>>>>> address in weewx.conf >>>>>>>>> I have three GW1000s here, I have no idea which one is being used >>>>>>>>> On Thursday, July 23, 2020 at 9:06:47 PM UTC-5 Bill Arthur wrote: >>>>>>>>> >>>>>>>>>> This link works: >>>>>>>>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.1.0b4/gw1000-0.1.0b4.tar.gz >>>>>>>>>> >>>>>>>>>> On Thursday, July 23, 2020 at 8:57:49 PM UTC-5 Bill Arthur wrote: >>>>>>>>>> >>>>>>>>>>> FYI: >>>>>>>>>>> wget -P /var/tmp >>>>>>>>>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.1.0b4/weewx-gw1000-0.1.0b4.tar.gz >>>>>>>>>>> >>>>>>>>>>> gives me an Error 404 >>>>>>>>>>> >>>>>>>>>>> On Thursday, July 23, 2020 at 3:22:07 PM UTC-5 galfert wrote: >>>>>>>>>>> >>>>>>>>>>>> There is a thread in the developer section where some questions >>>>>>>>>>>> were asked that were not directly related to development. This >>>>>>>>>>>> thread is >>>>>>>>>>>> good. I'm just inviting people to ask their questions here in this >>>>>>>>>>>> thread >>>>>>>>>>>> rather than in the developer section. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Thursday, July 23, 2020 at 2:56:51 PM UTC-4, steeple ian >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> ??? >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, 23 Jul 2020 at 19:39, galfert <gal...@gmail.com> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>> For anyone discussing this new GW1000 API driver in the WeeWX >>>>>>>>>>>>>> development section STOP. Use this user section instead to >>>>>>>>>>>>>> discuss its use. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>> >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to weewx...@googlegroups.com. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/91d513a8-cf9a-4cf2-8e16-261a02b67bebo%40googlegroups.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/91d513a8-cf9a-4cf2-8e16-261a02b67bebo%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/6cb996ae-fc26-4cb8-85ce-b408a9cefa5dn%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/6cb996ae-fc26-4cb8-85ce-b408a9cefa5dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/bf6c137d-9973-4a6c-896f-6d43b535ab94n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/bf6c137d-9973-4a6c-896f-6d43b535ab94n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/3edbf050-313a-49ec-9fab-3f1faf99beddn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/3edbf050-313a-49ec-9fab-3f1faf99beddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e8de78fd-e52f-49b1-8fad-9f1c68e8693dn%40googlegroups.com.
