Hi Bob, ahoj Pavle Once again I checked setting weewx with wee_config --list-drivers and I really had the original version 0.1 drivers. After a new installation and check, everything is fine, version 0.2 also reads the external sensor on channel 1. There is a link to the functional output http://jardauher.cz/wp-content/www/html/weewx/ thank you for good work Jarda
Dne středa 6. května 2020 21:05:41 UTC+2 Jarda Uher napsal(a): > > Ahoj Pavle > I also browsed the database, (DB Browser for SQLite) there are > extraTemp1,2,3 items but they are null. These are missing in the csv file. > Jarda > > Dne středa 6. května 2020 20:26:24 UTC+2 Pavel Pavlik napsal(a): >> >> Ahoj Jardo, >> >> Sure, firstly I tried to read the db there some way but unfortunately I >> was not able to make it properly so I used the plugin to dump it to csv >> file. I suppose you did the same, it is really easy to install. So the >> question is: does your csv file have the columns named ExtraTempX and >> ExtraHumidX? If not, you probably use the original version of the driver >> with no support for the external sensors. >> >> Good luck. >> >> Pavel >> >> >> >> >> Dne středa 6. května 2020 17:14:44 UTC+2 Jarda Uher napsal(a): >>> >>> Ahoj Pavle, hi Bob >>> Pavle thanks for the tip on csv. But even though I have a sensor >>> connected on channel 1, but I don't see it in the protocol. >>> Jarda >>> >>> Dne středa 6. května 2020 13:40:16 UTC+2 Pavel Pavlik napsal(a): >>>> >>>> Hi Bob, ahoj Jardo, >>>> >>>> I am apologize for the delay with the testing promised, had to go out >>>> for business, have tested the driver just partially. I managed to connect >>>> just one of the external sensors I have and now I can see its output in >>>> csv >>>> file (https://github.com/weewx/weewx/wiki/csv), both temperature and >>>> humidity values are there. On the default screen there is no external >>>> sensors graphs, I did not search how to add them, use just the csv output. >>>> Anyway, I should be home tomorrow, will finish the testing of both sensors >>>> together in all 7 channels possible, one by one, and let you know. >>>> >>>> Attaching the current csv file with the one external sensor connected >>>> in ch1. >>>> >>>> Thanks again for the driver & have a nice day. >>>> >>>> Pavel >>>> >>>> >>>> >>>> Dne pondělí 27. dubna 2020 23:32:30 UTC+2 Pavel Pavlik napsal(a): >>>>> >>>>> Hi Bob, >>>>> >>>>> Thanks a lot for the good news :-) >>>>> I will test it with the extra sensors and let you know. I have two >>>>> sensors, the sensors can be set as ch1-7 by an internal switch so I can >>>>> test all the channels, one by one. >>>>> >>>>> Have a nice day. >>>>> >>>>> Pavel >>>>> >>>>> >>>>> >>>>> Dne pondělí 27. dubna 2020 21:54:36 UTC+2 Bob Atchley napsal(a): >>>>>> >>>>>> >>>>>> Hi Pavel, >>>>>> >>>>>> The 0.2 release of the WS6in1 driver is now available. >>>>>> As stated I don't have an additional sensor to test the decode of the >>>>>> extra sensors, so please let me know how you get on >>>>>> >>>>>> Good luck >>>>>> >>>>>> Bob >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/722dd0d5-895d-4863-95fa-83815604fc31%40googlegroups.com.
