Ahoj Pavle, hi Bob Pavle thanks for the tip on csv. But even though I have a sensor connected on channel 1, but I don't see it in the protocol. Jarda
Dne středa 6. května 2020 13:40:16 UTC+2 Pavel Pavlik napsal(a): > > Hi Bob, ahoj Jardo, > > I am apologize for the delay with the testing promised, had to go out for > business, have tested the driver just partially. I managed to connect just > one of the external sensors I have and now I can see its output in csv file > (https://github.com/weewx/weewx/wiki/csv), both temperature and humidity > values are there. On the default screen there is no external sensors > graphs, I did not search how to add them, use just the csv output. Anyway, > I should be home tomorrow, will finish the testing of both sensors together > in all 7 channels possible, one by one, and let you know. > > Attaching the current csv file with the one external sensor connected in > ch1. > > Thanks again for the driver & have a nice day. > > Pavel > > > > Dne pondělí 27. dubna 2020 23:32:30 UTC+2 Pavel Pavlik napsal(a): >> >> Hi Bob, >> >> Thanks a lot for the good news :-) >> I will test it with the extra sensors and let you know. I have two >> sensors, the sensors can be set as ch1-7 by an internal switch so I can >> test all the channels, one by one. >> >> Have a nice day. >> >> Pavel >> >> >> >> Dne pondělí 27. dubna 2020 21:54:36 UTC+2 Bob Atchley napsal(a): >>> >>> >>> Hi Pavel, >>> >>> The 0.2 release of the WS6in1 driver is now available. >>> As stated I don't have an additional sensor to test the decode of the >>> extra sensors, so please let me know how you get on >>> >>> Good luck >>> >>> Bob >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/58328372-e017-4160-87f8-b3509e06b650%40googlegroups.com.
