Hi Gábor, Thanks for you response. Yes, I read into the interceptor method and it sounded quite tedious so I figuered it was worth a question on the forum. The console can be programmed for upload to WU, Ecowitt, Weathercloud and WOW. Besides theese there is a customized option as well, which might provide a way around re-routing. For now I think I'll go with the HA custom component method and wait for official HA support of the new WU API. I'd still want to try out weewx, so I put that in the backlog for this fall /Martin
Den tisdag 6 augusti 2019 kl. 15:07:02 UTC+2 skrev Gábor Szabados: > > Hi Martin, > > If this model is a FineOffset clone with a wifi connected console, as it > looks like, you need to set up interceptor to receive the packages what the > console would send to one of the providers (ie.: WU). > > I don't know that this console can be programmed for specific address like > the ObserverIPs, but if not then you need to define a rule in your router > to reroute the traffic to your weewx. There are plenty descriptions of > this, how to do it with some router firmwares. > > I personally have a Eurochron Efws2900, and a Raspberry Pi. The Pi creates > an AP where the console connects, and routes the data to WU. The Weewx runs > with interceptor set to sniffer mode. > > The rest of it is a different story and the previous commenter can help > you with that. > > I hope it helps! > > Gabor > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b1e76af8-ce39-4f69-b965-98abf0e984c1%40googlegroups.com.
