Hello to everyone, I've already read some of the posts about weewx-sdr and 
wh3080 but I haven't found a solution. I can retrieve all the data but not 
UV and Rain Total, how I can investigate for found a solution? 
Actually, I'm using SDR Driver version 0.47 and weewx version 3.8.2

Running driver directly the output of weewx-sdr is it:

out: ['{"time" : "2018-11-21 15:13:57", "model" : "Fine Offset Electronics 
WH1080/WH3080 Weather Station", "msg_type" : 0, "id" : 201, "temperature_C" 
: 10.000, "humidity" : 72, "direction_str" : "S", "direction_deg" : "180", 
"speed" : 4.896, "gust" : 6.120, "rain" : 5.400, "battery" : "OK"}\n']


parsed: {'signal_type.201.FOWHx080Packet': 0, 
'humidity.201.FOWHx080Packet': 72.0, 'day.201.FOWHx080Packet': None, 
'year.201.FOWHx080Packet': None, 'wind_dir.201.FOWHx080Packet': 180.0, 
'hours.201.FOWHx080Packet': None, 'seconds.201.FOWHx080Packet': None, 
'dateTime': 1542813237, 'temperature.201.FOWHx080Packet': 10.0, 
'battery.201.FOWHx080Packet': 0, 'month.201.FOWHx080Packet': None, 
'msg_type.201.FOWHx080Packet': 0, 'minutes.201.FOWHx080Packet': None, 
'wind_speed.201.FOWHx080Packet': 4.896, 'rain_total.201.FOWHx080Packet': 
5.4, 'usUnits': 16, 'wind_gust.201.FOWHx080Packet': 6.12}



out: ['{"time" : "2018-11-21 15:14:16", "model" : "Fine Offset Electronics 
WH3080 Weather Station", "msg_type" : 2, "uv_sensor_id" : 95, "uv_status" : 
"OK", "uv_index" : 1, "lux" : 1771.000, "wm" : 2.593, "fc" : 164.591}\n', 
'{"time" : "2018-11-21 15:14:16", "model" : "Fine Offset Electronics WH3080 
Weather Station", "msg_type" : 2, "uv_sensor_id" : 95, "uv_status" : "OK", 
"uv_index" : 1, "lux" : 1771.000, "wm" : 2.593, "fc" : 164.591}\n', 
'{"time" : "2018-11-21 15:14:16", "model" : "Fine Offset Electronics WH3080 
Weather Station", "msg_type" : 2, "uv_sensor_id" : 95, "uv_status" : "OK", 
"uv_index" : 1, "lux" : 1771.000, "wm" : 2.593, "fc" : 164.591}\n']


parsed: {'radiation.95.FOWH3080Packet': 2.593, 
'uv_status.95.FOWH3080Packet': 0, 'luminosity.95.FOWH3080Packet': 1771.0, 
'uv_index.95.FOWH3080Packet': 1.0, 'dateTime': 1542813256, 
'illumination.95.FOWH3080Packet': 164.591, 'usUnits': 16, 
'msg_type.95.FOWH3080Packet': 2}


in my weewx.conf there is:


station_type = SDR


[SDR]

    # This section is for the software-defined radio driver.


    # The driver to use

    driver = user.sdr

    cmd= rtl_433 -q -U -F json -R 32

    path = /usr/local/bin

    ld_library_path = /usr/local/lib


  [[sensor_map]]

        windGust = wind_gust.201.FOWHx080Packet

        outBatteryStatus = battery.201.FOWHx080Packet

        rain_total = rain_total.201.FOWHx080Packet

        windSpeed = wind_speed.201.FOWHx080Packet

        windDir = wind_dir.201.FOWHx080Packet

        outHumidity = humidity.201.FOWHx080Packet

        outTemp = temperature.201.FOWHx080Packet

        uv = uv_index.95.FOWH3080Packet

        radiation = radiation.95.FOWH3080Packet


SYSLOG:


raspberrypi weewx[445]: sdr: MainThread: driver version is 0.47

Nov 21 17:37:25 raspberrypi weewx[445]: sdr: MainThread: sensor map is 
{'windGust': 'wind_gust.201.FOWHx080Packet', 'outBatteryStatus': 
'battery.201.FOWHx080Packet', 'rain_total': 
'rain_total.201.FOWHx080Packet', 'windSpeed': 
'wind_speed.201.FOWHx080Packet', 'windDir': 'wind_dir.201.FOWHx080Packet', 
'outHumidity': 'humidity.201.FOWHx080Packet', 'outTemp': 
'temperature.201.FOWHx080Packet', 'uv': 'uv_index.95.FOWH3080Packet', 
'radiation': 'radiation.95.FOWH3080Packet'}

Nov 21 17:37:25 raspberrypi weewx[445]: sdr: MainThread: deltas is 
{'strikes': 'strikes_total', 'rain': 'rain_total'}

Nov 21 17:37:25 raspberrypi weewx[445]: sdr: MainThread: startup process 
'rtl_433 -q -U -F json -R 32'

Nov 21 17:37:25 raspberrypi weewx[445]: engine: StdConvert target unit is 
0x1

Nov 21 17:37:25 raspberrypi weewx[445]: wxcalculate: The following values 
will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, 
dewpoint=prefer_hardware, appTemp=prefer_hardware, 
rainRate=prefer_hardware, windrun=prefer_hardware, 
heatindex=prefer_hardware, maxSolarRad=prefer_hardware, 
humidex=prefer_hardware, pressure=prefer_hardware, 
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, 
cloudbase=prefer_hardware

Nov 21 17:37:25 raspberrypi weewx[445]: wxcalculate: The following 
algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS

Nov 21 17:37:25 raspberrypi weewx[445]: engine: Archive will use data 
binding wx_binding

Nov 21 17:37:25 raspberrypi weewx[445]: engine: Record generation will be 
attempted in 'hardware'

Nov 21 17:37:25 raspberrypi weewx[445]: engine: Using archive interval of 
300 seconds (specified in weewx configuration)

Nov 21 17:37:25 raspberrypi weewx[445]: engine: Using binding 'wx_binding' 
to database 'weewx.sdb'


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to