I would suggest a bit of searching of the forums, it seems there are some
peculiarities with the WMR200 and archive interval.
Gary
On Monday, 5 November 2018 05:55:08 UTC+10, Per Edström wrote:
>
> Sorry about that - here it is..
>
> It seems like the config-value (300) is overridden by the WMR200-value
> (60).
>
>
> Nov 4 20:49:26 RPi-3B_Skalet systemd[1]: Starting LSB: weewx weather
> system...
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17619]: engine: Initializing weewx
> version 3.8.2
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17619]: engine: Using Python 2.7.13
> (default, Sep 26 2018, 18:42:22) #012[GCC 6.3.0 20170516]
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17619]: engine: Platform
> Linux-4.14.70-v7+-armv7l-with-debian-9.4
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17619]: engine: Locale is 'en_GB.UTF-8'
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17619]: engine: pid file is
> /var/run/weewx.pid
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: engine: Using configuration
> file /etc/weewx/weewx.conf
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: engine: Debug is 1
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: engine: Initializing engine
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: engine: Loading station type
> WMR200 (weewx.drivers.wmr200)
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17608]: Starting weewx weather system:
> weewx.
> Nov 4 20:49:26 RPi-3B_Skalet systemd[1]: Started LSB: weewx weather
> system.
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: I driver
> version is 3.3.5
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: I sensor
> map is {'outTempBatteryStatus': 'battery_status_out', 'extraTemp10':
> 'temperature_10', 'outHumidity': 'humidity_1', 'rainRate': 'rain_rate',
> 'extraHumid8': 'humidity_8', 'heatindex4': 'heatindex_4', 'rainTotal':
> 'rain_total', 'rainBatteryStatus': 'battery_status_rain', 'heatindex6':
> 'heatindex_6', 'extraTemp5': 'temperature_5', 'uvFault': 'uv_fault',
> 'extraTemp2': 'temperature_2', 'heatindex': 'heatindex_1', 'rain24':
> 'rain_24', 'inHeatindex': 'heatindex_0', 'inTemp': 'temperature_0',
> 'extraHumid9': 'humidity_9', 'hourRain': 'rain_hour', 'windFault':
> 'wind_fault', 'extraHumid10': 'humidity_10', 'windchill': 'windchill',
> 'clockUnsynchronized': 'clock_unsynchronized', 'extraTemp7':
> 'temperature_7', 'rain': 'rain', 'forecastIcon': 'forecast_icon',
> 'pressure': 'pressure', 'extraHumid4': 'humidity_4', 'extraHumid5':
> 'humidity_5', 'extraHumid2': 'humidity_2', 'extraHumid3': 'humidity_3',
> 'extraTemp8': 'temperature_8', 'extraTemp9': 'temperature_9', 'extraTemp6':
> 'temperature_6', 'heatindex5': 'heatindex_5', 'extraTemp4':
> 'temperature_4', 'heatindex7': 'heatindex_7', 'altimeter': 'altimeter',
> 'extraTemp3': 'temperature_3', 'heatindex2': 'heatindex_2', 'heatindex3':
> 'heatindex_3', 'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7',
> 'windBatteryStatus': 'battery_status_wind', 'UV': 'uv', 'rainFault':
> 'rain_fault', 'windDir': 'wind_dir', 'outTemp': 'temperature_1',
> 'windSpeed': 'wind_speed', 'inHumidity': 'humidity_0', 'outTempFault':
> 'out_fault', 'windGust': 'wind_gust', 'uvBatteryStatus':
> 'battery_status_uv', 'heatindex8': 'heatindex_8', 'heatindex10':
> 'heatindex_10', 'heatindex9': 'heatindex_9'}
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: I Created
> watchdog thread to poke for live data every 30 seconds
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: I Created
> USB polling thread to read block on device
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: wmr200: Thread-2: I USB
> polling device thread for live data launched
> Nov 4 20:49:26 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: I Reset
> console device
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: Thread-2: I USB
> polling device thread signaled to start
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D
> Configuration setup
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: Thread-1: I Started
> watchdog thread live data
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D Log
> sensor faults: True
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D Using
> PC Time: True
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D Erase
> archive data: False
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D Archive
> interval: 60
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D
> Archive threshold: 604800
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdTimeSynch
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdTimeSynch
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdConvert
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: StdConvert target unit
> is 0x1
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdConvert
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdCalibrate
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdCalibrate
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdQC
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdQC
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.wxservices.StdWXCalculate
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wxcalculate: The following
> values will be calculated: barometer=prefer_hardware, windchill=hardware,
> dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=hardware,
> windrun=prefer_hardware, heatindex=hardware, maxSolarRad=prefer_hardware,
> humidex=prefer_hardware, pressure=prefer_hardware,
> inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
> cloudbase=prefer_hardware
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wxcalculate: The following
> algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.wxservices.StdWXCalculate
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdArchive
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Archive will use data
> binding wx_binding
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Record generation
> will be attempted in 'software'
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: The archive interval
> in the configuration file (300) does not match the station hardware
> interval (60).
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Using archive
> interval of 60 seconds (specified by hardware)
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Use LOOP data in
> hi/low calculations: 1
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: manager: Daily summary version
> is 2.0
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Using binding
> 'wx_binding' to database 'weewx.sdb'
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: manager: Starting backfill of
> daily summaries
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdArchive
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.restx.StdStationRegistry
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: restx: StationRegistry:
> Registration not requested.
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.restx.StdStationRegistry
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.restx.StdWunderground
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: restx: Wunderground: Posting
> not enabled.
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.restx.StdWunderground
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.restx.StdPWSweather
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: restx: PWSweather: Posting not
> enabled.
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.restx.StdPWSweather
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.restx.StdCWOP
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: restx: CWOP: Posting not
> enabled.
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.restx.StdCWOP
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.restx.StdWOW
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: restx: WOW: Posting not
> enabled.
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.restx.StdWOW
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.restx.StdAWEKAS
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: restx: AWEKAS: Posting not
> enabled.
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.restx.StdAWEKAS
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdPrint
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdPrint
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Loading service
> weewx.engine.StdReport
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Finished loading
> service weewx.engine.StdReport
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Starting up weewx
> version 3.8.2
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: engine: Station does not
> support reading the time
> Nov 4 20:49:27 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D
> genStartup() phase getting archive packets since 2018-11-04 20:48:00 CET
> (1541360880)
> Nov 4 20:49:33 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: I Time
> drift between host and console in seconds:34
> Nov 4 20:49:33 RPi-3B_Skalet weewx[17623]: wmr200: MainThread: D
> Queuing live packet rx:1 live_queue_len:1
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
