I assume your archive interval is also set at one minute - so you can alternatively make your archive interval 5 minutes (300 seconds) which would You may need to also try software archive record generation if hardware generation is currently selected.
a) give a reading for all sensors within the interval b) put less workload on your computer c) ensure one reports cycle always finishes before the next starts d) archive will be smaller On Friday, 2 November 2018 22:18:58 UTC+2, Per Edström wrote: > > Sensor data is quite often missing from my WMR200-stations. Data is pulled > every minute (hardware control) but from time to time some data is missing. > > This causes the webpage to present "N/A" and dropouts in diagrams. > Somewhat annouying and not really neccesary. > > Not that many sensor values are changed rapidly and I'd rather have an old > value than none at all. > > So, it is possible to have a setting in e.g. weewx.conf > > [db_refill] > missing = 10 > > So that up to 10 missing sensor values can be replaced by the last value > received. In my case that would be 10 minutes. 10 missing sensor data in a > row is not that common.. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
