Hardware setup is: USB-to-Serial (exactly the one in below link), USB end connected to Raspberry Pi (Model 3 B+) running latest Raspbian OS. The logs were repeating themselves. Weewx engine starts fine and attempts to read the data from WS1 for 5 times, the cycle repeats every 60 seconds.
" turn up the debug " - how do i do this? Let me know if you need any additional info. *USB to Serial adapter: https://www.adafruit.com/product/954?gclid=CjwKCAjw_b3cBRByEiwAdG8Wqsin2OTBfbZYWYdOGAfOTQrFS9N3ipR302WZe6v_J6OyOP18qNhEeRoCgSMQAvD_BwE <https://www.adafruit.com/product/954?gclid=CjwKCAjw_b3cBRByEiwAdG8Wqsin2OTBfbZYWYdOGAfOTQrFS9N3ipR302WZe6v_J6OyOP18qNhEeRoCgSMQAvD_BwE>* *Best Regards,**Ram* <https://www.linkedin.com/in/gayamsairam> On Wed, Sep 5, 2018 at 5:02 AM Matthew Wall <[email protected]> wrote: > what gary said. turn up the debug, and capture output from the time you > start weewx until after a few archive intervals or restart cycles. > > you *should* be able to do this with this config: > > debug = 2 > [WS1] > ... > debug_read = 1 > > but you might have to set DEBUG_READ = 1 in the ws1.py file itself (look > at the beginning of the file) > > that will tell us what your ws1 is spitting out > > it also matters whether you are connecting directly or using a serial > extender or a serial-to-ethernet adapter. so let us know your hardware > configuration. > > m > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
