The ADS WS1 weather station output when connected via minicom is not in Peet Bros format, which is making it hard for weewx to listen to the data. Anyone had these problems before? Could you please help me troubleshoot this?
Let me know if you need anything else. Below is the snapshot of syslog: Sep 4 19:33:06 raspberrypi weewx[553]: engine: Starting up weewx version 3.8.2 Sep 4 19:33:06 raspberrypi weewx[553]: engine: Starting main packet loop. Sep 4 19:33:06 raspberrypi weewx[553]: ws1: Failed attempt 1 of 5 to get readings: Unexpected buffer length 45 Sep 4 19:33:16 raspberrypi weewx[553]: ws1: Failed attempt 2 of 5 to get readings: Unexpected buffer length 0 Sep 4 19:33:26 raspberrypi weewx[553]: ws1: Failed attempt 3 of 5 to get readings: Unexpected buffer length 9 Sep 4 19:33:36 raspberrypi weewx[553]: ws1: Failed attempt 4 of 5 to get readings: Unexpected buffer length 5 Sep 4 19:33:46 raspberrypi weewx[553]: ws1: Failed attempt 5 of 5 to get readings: Unexpected buffer length 14 Sep 4 19:33:56 raspberrypi weewx[553]: ws1: Max retries (5) exceeded for readings Sep 4 19:33:57 raspberrypi weewx[553]: engine: Caught WeeWxIOError: Max retries (5) exceeded for readings Sep 4 19:33:57 raspberrypi weewx[553]: **** Waiting 60 seconds then retrying... Thank you. P.S.: This is a high priority project and there is no support for my problem all over the web. So any help regarding this is much appreciated. Regards, Ram -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
