Have you kept pressing "set" after setting date and time? I believe that's how you get to set usb mode on the 2032C at least. https://support.acurite.com/acurite/topics/how-to-set-usb-mode-on-model-02032c
On Monday, 30 April 2018 08:06:12 UTC+3, Alexander Shelley wrote: > Hi all, > Ive got a default install of weewx on a debian machine (I have tried > installing via apt-get and python), I'm trying to get weewx to run so I can > export data to homeassistant, but I get the following error in my systemlog: > > Apr 29 22:01:10 localhost weewx[31912]: engine: Loading station type > AcuRite (weewx.drivers.acurite) > Apr 29 22:01:10 localhost weewx[31912]: acurite: driver version is 0.24 > Apr 29 22:01:10 localhost weewx[31912]: acurite: R2 will be decoded using > sensor constants > Apr 29 22:01:10 localhost weewx[31912]: acurite: Found station at bus= > device= > Apr 29 22:01:10 localhost weewx[31912]: acurite: Failed attempt 1 of 10 to > get LOOP data: [Errno 5] Input/Output Error > > This model seems to not have a USB mode, so its not that. > Searching my model number pulls up some with similar problems, but their > solutions don't seem to effect my outcomes. > Any ideas? > > Similar thread: > https://groups.google.com/forum/#!topic/weewx-user/raHOllx2Yk4 > > weewx.conf: > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 1 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = /home/weewx > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 3.8.0 > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = ShelleyHome > > # Latitude and longitude in decimal degrees > latitude = 90.000 > longitude = 0.000 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 112, meter # Choose 'foot' or 'meter' for unit > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = AcuRite > > # If you have a website, you may specify an URL > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > > ############################################################################## > > [AcuRite] > # This section is for AcuRite weather stations. > > # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' > model = AcuRite 02064c > > # The driver to use: > driver = weewx.drivers.acurite > > > ############################################################################## > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
