Hi all, Ive got a default install of weewx on a debian machine (I have tried installing via apt-get and python), I'm trying to get weewx to run so I can export data to homeassistant, but I get the following error in my systemlog:
Apr 29 22:01:10 localhost weewx[31912]: engine: Loading station type AcuRite (weewx.drivers.acurite) Apr 29 22:01:10 localhost weewx[31912]: acurite: driver version is 0.24 Apr 29 22:01:10 localhost weewx[31912]: acurite: R2 will be decoded using sensor constants Apr 29 22:01:10 localhost weewx[31912]: acurite: Found station at bus= device= Apr 29 22:01:10 localhost weewx[31912]: acurite: Failed attempt 1 of 10 to get LOOP data: [Errno 5] Input/Output Error This model seems to not have a USB mode, so its not that. Searching my model number pulls up some with similar problems, but their solutions don't seem to effect my outcomes. Any ideas? Similar thread: https://groups.google.com/forum/#!topic/weewx-user/raHOllx2Yk4 weewx.conf: ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = /home/weewx # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.8.0 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = ShelleyHome # Latitude and longitude in decimal degrees latitude = 90.000 longitude = 0.000 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 112, meter # Choose 'foot' or 'meter' for unit # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = AcuRite # If you have a website, you may specify an URL #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [AcuRite] # This section is for AcuRite weather stations. # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' model = AcuRite 02064c # The driver to use: driver = weewx.drivers.acurite ############################################################################## -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
