Hi
If understand this correctly this snippet from my weex.conf [[forecast]] HTML_ROOT = public_html/forecast skin = forecast will create an index file in the folder public_html/forecast and use the skn from the forecast directory Uncomment here or override in weewx.conf to display other units #[Units] # [[Groups]] group_altitude = meter group_degree_day = degree_C_day group_pressure = mbar group_radiation = watt_per_meter_squared group_rain = mm group_rainrate = mm_per_hour group_speed = meter_per_second group_speed2 = meter_per_second2 group_temperature = degree_C my standard skin also has the following [Units] # This section is for managing the selection and formatting of units. [[Groups]] # For each group of measurements, this section sets what units to # use for it. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' group_altitude = meter # Options are 'foot' or 'meter' group_degree_day = degree_c_day # Options are 'degree_F_day' or 'degree_C_day' group_direction = degree_compass group_moisture = centibar group_percent = percent group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' group_radiation = watt_per_meter_squared group_rain = mm # Options are 'inch', 'cm', or 'mm' group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' group_speed = mile_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = mile_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' group_temperature = degree_c # Options are 'degree_F' or 'degree_C' group_uv = uv_index group_volt = volt # The following are used internally and should not be changed: group_count = count group_interval = minute group_time = unix_epoch group_elapsed = second [[StringFormats]] and finally in my weewx.conf [[StandardReport]] # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. # The StandardReport uses the 'Standard' skin, which contains the # images, templates and plots for the report. skin = Standard [[[Units]]] [[[[Groups]]]] group_altitude = meter group_speed2 = meter_per_second2 group_pressure = mbar group_rain = mm group_rainrate = mm_per_hour group_temperature = degree_C group_degree_day = degree_C_day group_speed = meter_per_second [[cmon]] HTML_ROOT = public_html/cmon skin = cmon so I believe I have it configure correctly to display metric units in my forecast html so i am unsure why i get feet and deg F in my forecast index_html On Monday, February 5, 2018 at 10:41:40 PM UTC, vigilancewx wrote: > > Hi > > > I have install weewx 3.8 > > > I am running it in simulator mode while testing > > > The graphs and temps that are shown within the public_html directory are > in metric units as per weewx.conf > > > I have instaled xtide and when testing it from the command line interface > the HI low tides are shown in meters > > > I have installed the forecast module with an API from the UK metoffice and > WU > > > the forecasts displayed (weather and tides ) in the index.html with the > public_html/forcecast/ directory are shown in US units > > > do I need to configure the forecast.py or skin to enable the metric units > > > weewx is showning the correct metric units > > the forcast extension is shown US units?? > > > thanks for any help > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
