I also rebuilt a new SD card (for a Pi) to transfer from Wheezy to Jessie and used apt-get to install Weewx 3.7.1 (from 3.6.2 if I remember correctly)
I do have dayhumidity.png in the html pages but it is not populated with data. I do have the lines (shown by Tom above) in the skin.conf file for Day, Week, Month and Year Also have the Weekly , Monthly and Yearly png files and these are all populated and up to date. Any ideas appreciated Paul On Wednesday, 3 May 2017 09:05:55 UTC+1, Nick Mason wrote: > > Tom, > > thank you, those two lines of code were missing from skin.conf and from > the backup. > > Just to prove I wasn't going mad I put the original SD card back in the > RPi and they are there! > > I also had to add the code to the monthly and yearly sections, modified > accordingly. > > How they got removed from the backup I have no idea, it seems too specific > for corruption during the backup but stranger things have happened > > Regards > Nick > > On Tuesday, 2 May 2017 22:55:35 UTC+1, Tom Keffer wrote: >> >> If other images are being generated, but only the dayhumidity.png image >> is missing, the problem must be in the skin.conf file. If you did a Debian >> install, it will be located in /etc/weewx/skins/Standard/skin.conf >> >> The relevant section should look something like this: >> >> >> ... >> [[[daytempchill]]] >> [[[[windchill]]]] >> [[[[heatindex]]]] >> >> [[[dayhumidity]]] >> [[[[outHumidity]]]] >> >> [[[dayrain]]] >> # Make sure the y-axis increment is at least 0.02 for the >> rain plot >> yscale = None, None, 0.02 >> plot_type = bar >> [[[[rain]]]] >> aggregate_type = sum >> aggregate_interval = 3600 >> label = Rain (hourly total) >> ... >> >> >> >> On Tue, May 2, 2017 at 9:57 AM, Nick Mason <[email protected]> wrote: >> >>> I've had a small but nagging problem for a while with my Raspberry Pi >>> that runs weewx. When I try to upgrade rasbian I get an error message. >>> >>> I'm not sure if I get a partial upgrade or no upgrade following a; >>> >>> sudo apt-get update >>> sudo apt-get upgrade >>> >>> I finally got around to sorting it out by by creating a new MicroSD card >>> with the latest rasbian image. I then decide that along with the latest OS >>> that I'd do a fresh install of weewx as well and this time rather than do a >>> manual download and install using setup.py I would install weewx via >>> apt-get install weewx. >>> >>> All went well, it's a lot easier than the manual method and it worked as >>> advertised. I then replaced the new database with the one from my backup >>> and weewx dutifully brought it up to date. However, I noticed that the >>> graphs on the web page were staggered and out of alignment and that this >>> was because one of the graphs, Outside Humidity, is missing. All that shows >>> is a small box with 'outside humidity' in it. >>> >>> I've had a look through the code and what should be displayed is the >>> dayhumidity.png image. This image isn't being generated and does not appear >>> in /var/www/html/weewx >>> >>> I've compared the new weewx.conf and skin.conf files with the backups I >>> have from the older version and they look the same. >>> >>> Can someone point me at where the report is generated and the image file >>> produced please so I can have a look at what's going on. >>> >>> Thanks >>> Nick >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
