Hoi Sastry, I don't know much about MPLS in VPP (I'd still love to learn how to do it properly, notably using higher level controlplane like LDP and such), but, I can enable MPLS just fine:
DBGvpp# mpls table add 0 DBGvpp# set interface mpls GigabitEthernet3/0/0 enable DBGvpp# show mpls interface GigabitEthernet3/0/0 MPLS enabled groet, Pim On Tue, Jun 21, 2022 at 8:19 PM Sastry Sista <sastry.si...@gmail.com> wrote: > Hi Vpp Expert, > > My fdio ver is 21.06. I have added mpls table add 0 and then trying to > enable interface for mpls. > > When I enabled: (set interface mpls VirtualFuncEthernet0/7/0.1600 enable) > > the output of " show int features VirtualFuncEthernet0/7/0.1600" is as > below: > ....... > mpls-input: > mpls-not-enabled > ......... > > When I disable mpls on same interface. Its not changing much. some times I > also see "none configured". > > I have created interface using VL API but trying to change using vppctl > command. > > Is it fine and also, what shall be the output when we enable or disable at > interface for mpls. > > With Regards > Sastry > > > > none configured > > mpls-input: > mpls-not-enabled > > > > > -- Pim van Pelt <p...@ipng.nl> PBVP1-RIPE - http://www.ipng.nl/
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21564): https://lists.fd.io/g/vpp-dev/message/21564 Mute This Topic: https://lists.fd.io/mt/91906032/21656 Mute #mpls:https://lists.fd.io/g/vpp-dev/mutehashtag/mpls Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
