Hoi, I am not familiar with the message, but in the past I've had DPDK refuse to start if the wrong DDP was loaded: [ 0.431937] kernel: pci 0000:0c:00.0: [8086:1592] type 00 class 0x020000 [ 0.431959] kernel: pci 0000:0c:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit pref] [ 0.431981] kernel: pci 0000:0c:00.0: reg 0x1c: [mem 0xee010000-0xee01ffff 64bit pref] [ 0.431999] kernel: pci 0000:0c:00.0: reg 0x30: [mem 0xfce00000-0xfcefffff pref] [ 0.432141] kernel: pci 0000:0c:00.0: reg 0x184: [mem 0xed000000-0xed01ffff 64bit pref] [ 0.432142] kernel: pci 0000:0c:00.0: VF(n) BAR0 space: [mem 0xed000000-0xedffffff 64bit pref] (contains BAR0 for 128 VFs) [ 0.432164] kernel: pci 0000:0c:00.0: reg 0x190: [mem 0xee220000-0xee223fff 64bit pref] [ 0.432166] kernel: pci 0000:0c:00.0: VF(n) BAR3 space: [mem 0xee220000-0xee41ffff 64bit pref] (contains BAR3 for 128 VFs)
*[ 11.136114] kernel: ice 0000:0c:00.0: The DDP package was successfully loaded: ICE COMMS Package version 1.3.30.0*[ 11.316100] kernel: ice 0000:0c:00.0: PTP init successful [ 11.479331] kernel: ice 0000:0c:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8 [ 11.479333] kernel: ice 0000:0c:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode. [ 11.479334] kernel: ice 0000:0c:00.0: Commit DCB Configuration to the hardware [ 11.482280] kernel: ice 0000:0c:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link) (emphasis mine). For me, on Ubuntu 20.04: pim@hippo:/lib$ ls -la /lib/firmware/updates/intel/ice/ddp total 1308 drwxr-xr-x 2 root root 4096 Jan 13 12:27 . drwxr-xr-x 3 root root 4096 Sep 30 2021 .. -rw-r--r-- 1 root root 635256 Sep 30 2021 ice-1.3.26.0.pkg *lrwxrwxrwx 1 root root 22 Jan 13 12:11 ice-b49691ffffb3b110.pkg -> ice_comms-1.3.30.0.pkg*-rwxr-xr-x 1 root root 684408 Jan 13 12:09 ice_comms-1.3.30.0.pkg lrwxrwxrwx 1 root root 22 Jan 13 12:27 ice.pkg -> ice_comms-1.3.30.0.pkg -rw-r--r-- 1 root root 2089 Sep 30 2021 LICENSE (emphasis mine) sees to it that the comms DDP is loaded into the NIC before starting VPP. Maybe that helps you ? groet, Pim On Wed, Apr 13, 2022 at 3:14 PM <pillerisamu...@gmail.com> wrote: > Hello, > > This is my first message, hope I'm in the right place. > I'm having troubles with an Intel E810-CAM2 card and VPP/DPDK: after > assigning an IP address to the VPP interface and enabling it, I can't ping > it. It looks like all packets get dropped (rx missed) and in show > interfaces I can see the following error: > > rx bytes ok 1776 > rx missed 18 Errors: > rte_eth_dev_start[port:0, errno:-5]: Unknown error -5 > > VPP version is 21.06, DPDK 21.08, NIC Non-Volatile Memory 3.00 > > Attached the output of runtime and hardware-interfaces, I hope they will > be useful. > > Thank you, > Samuele > > > -- Pim van Pelt <p...@ipng.nl> PBVP1-RIPE - http://www.ipng.nl/
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21252): https://lists.fd.io/g/vpp-dev/message/21252 Mute This Topic: https://lists.fd.io/mt/90440122/21656 Mute #dpdk:https://lists.fd.io/g/vpp-dev/mutehashtag/dpdk Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
