This is a question for https://mails.dpdk.org/listinfo/users We are mostly using trex but still, there is a --tx-ip option documented in https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html#testpmd-command-line-options
ben > -----Original Message----- > From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Pragya Nand > Bhagat > Sent: lundi 21 février 2022 07:20 > To: vpp-dev@lists.fd.io > Subject: [vpp-dev] Facing issue with forming packets in dpdk-testpmd. > > Hi All, > > > I'm trying to form a specific traffic flow with dpdk-testpmd before > starting traffic using "start tx_first". > I'm able to configure the destination mac using " set eth-peer (port_id) > (peer_addr)". > I was not able to find a similar command for setting the destination ip > address. > > > I also found : > testpmd> set fwd (io|mac|macswap|flowgen| \ > rxonly|txonly|csum|icmpecho|noisy) > • flowgen: Multi-flow generation mode. Originates a number of flows > (with varying destination IP addresses), and terminate receive traffic. > > but I could not find any example usage . > If someone could please point out how to use this option or how to > configure dst-ip for a traffic originating from dpdk-testpmd. > > Thank You > Pragya Nand Bhagat >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#20884): https://lists.fd.io/g/vpp-dev/message/20884 Mute This Topic: https://lists.fd.io/mt/89288568/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
