Hi All, I'm trying to form a specific traffic flow with dpdk-testpmd before starting traffic using "*start tx_first*". I'm able to configure the destination mac using " *set eth-peer** (port_id) (peer_addr)*". I was not able to find a similar command for setting the destination ip address.
I also found : testpmd> set fwd (io|mac|macswap|flowgen| \ rxonly|txonly|csum|icmpecho|noisy) • flowgen: Multi-flow generation mode. Originates a number of flows (with varying destination IP addresses), and terminate receive traffic. but I could not find any example usage . If someone could please point out how to use this option or how to configure dst-ip for a traffic originating from dpdk-testpmd. Thank You Pragya Nand Bhagat
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#20882): https://lists.fd.io/g/vpp-dev/message/20882 Mute This Topic: https://lists.fd.io/mt/89288568/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
