Hi
I do not have access to the system for the next few days, but as soon as I
access it, I will send the requested configurations. For the startup.conf
file, I have configured something like this:
cpu {
main-core 0
corelist-workers 1-37
}
dpdk{
socket-mem 1024, 1024
num-mbufs 1000000
dev....
48 interface 1G
10 interface 10G
}
I appreciate if you shared your startup.conf file.
Best regards,
Mohsen Memariyan
On Thu, Sep 16, 2021, 13:23 Venumadhav Josyula <vjosy...@gmail.com> wrote:
> Hi Mohsen,
>
> We recently tested , we are good throughput for gtp-u ( non-ipsec ) case.
> We had link limitation of 10 Gbps... We were doing Line rate for single cpu
> and single gtp-u tunnel.
>
> Can you configuration details ? Also
> show hardware-interfaces
> and startup.conf
>
> Thanks
> Regards
> Vemu
>
> On Thu, Sep 16, 2021, 1:43 PM Mohsen Meamarian <meamarian.moh...@gmail.com>
> wrote:
>
>> Hello to all dear friends,
>>
>> I have trouble getting high throughput from VPP. Where and how can I
>> apply configurations that make the throughput as much as possible? I have
>> attached a photo of the amount of throughput I should have (green) and the
>> amount of throughput I have now (blue). I use 2 CPUs that each have 20
>> cores. I see "htop" command results and all CPU cores almost are in 100%
>> usage. I use VPP in Multi-thread mode. How can I apply effective settings
>> on DPDK via VPP? For example, increasing the size of huge pages. I
>> appreciate any help you can provide.
>>
>> best regards,
>> Mohsen Memariyan
>>
>>
>>
>>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#20148): https://lists.fd.io/g/vpp-dev/message/20148
Mute This Topic: https://lists.fd.io/mt/85647105/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
