Hi Mohsen, We recently tested , we are good throughput for gtp-u ( non-ipsec ) case. We had link limitation of 10 Gbps... We were doing Line rate for single cpu and single gtp-u tunnel.
Can you configuration details ? Also show hardware-interfaces and startup.conf Thanks Regards Vemu On Thu, Sep 16, 2021, 1:43 PM Mohsen Meamarian <meamarian.moh...@gmail.com> wrote: > Hello to all dear friends, > > I have trouble getting high throughput from VPP. Where and how can I apply > configurations that make the throughput as much as possible? I have > attached a photo of the amount of throughput I should have (green) and the > amount of throughput I have now (blue). I use 2 CPUs that each have 20 > cores. I see "htop" command results and all CPU cores almost are in 100% > usage. I use VPP in Multi-thread mode. How can I apply effective settings > on DPDK via VPP? For example, increasing the size of huge pages. I > appreciate any help you can provide. > > best regards, > Mohsen Memariyan > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#20142): https://lists.fd.io/g/vpp-dev/message/20142 Mute This Topic: https://lists.fd.io/mt/85647105/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
