Hi Damjan, We need dpdk, the reason being that packets from the NICs ( pollmode ) need to come inside our packet processing sw ( GTPU). So we wanted to use dpdk for the same. Now we wanted to know the pod in which vpp is running in non-previleged mode.
Now we have questions i) is it possible ? ii) if yes how ? Now we were looking at below link for examples, but no luck... they non-previleged running vpp + dpdk had some problems. https://github.com/cncf/cnf-testbed/issues/291 Hence i am trying to check in the community. Thanks, Regards, Venu On Fri, 18 Jun 2021 at 12:20, Damjan Marion <dmar...@me.com> wrote: > > > Why do you need dpdk? > > — > Damjan > > On 18.06.2021., at 06:47, Venumadhav Josyula <vjosy...@gmail.com> wrote: > > > Hi Christian, > > Can you please share the exact steps please ? > > Thanks, > Regards, > Venu > > On Thu, 17 Jun 2021 at 21:25, Christian Hopps <cho...@chopps.org> wrote: > >> >> "Venumadhav Josyula" <vjosy...@gmail.com> writes: >> >> > Hi All, >> > >> > Can you run vpp + dpdk in non-privileged mode ? This vpp running >> > inside pod as a cnf >> >> I did this at one point, IIRC I had to disable something small bit of >> code in the dpdk_early_init that required root, but as this code was only >> required to do something directly with the HW later, it wasn't needed in >> the container/virtual case. >> >> Thanks, >> Chris. >> >> > >> > Thanks, >> > Regards, >> > Venu >> > >> > >> > >> > >> >> > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#19606): https://lists.fd.io/g/vpp-dev/message/19606 Mute This Topic: https://lists.fd.io/mt/83551481/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
