By no means, happens all the time! Glad it was solved! Regards, Florin
> On Jul 22, 2020, at 11:09 AM, Sebastiano Miano <mianosebasti...@gmail.com> > wrote: > > Hi Florin, > what a fool I am, you are right ;) > > Just for reference, with the release image, the throughput increases to > 11.4Gbps. > > Thanks again for your support. > > Regards, > Sebastiano > > Il giorno mer 22 lug 2020 alle ore 18:27 Florin Coras <fcoras.li...@gmail.com > <mailto:fcoras.li...@gmail.com>> ha scritto: > Hi Sebastiano, > > You’re running a debug image, so that is expected. Try to run a release > image. > > Regarding the proxy issue, it looks like the proxy did not close/reuse the > fifos accordingly. Will try to look into it. > > Regards, > Florin > >> On Jul 22, 2020, at 2:23 AM, Sebastiano Miano <mianosebasti...@gmail.com >> <mailto:mianosebasti...@gmail.com>> wrote: >> >> Hi Florin, >> thanks for your reply. >> Unfortunately, changing the "fifo size" to "4m" has not changed the >> performance that much. I've only got 2Gbps instead of 1.5Gbps. >> Moreover, I have checked both the "show errors" output and it looks like no >> errors are shown [1]. >> The "show run" output looks fine, which makes me think that VPP is actually >> loaded and running. >> >> What is weird is that, sometimes, after a couple of runs, the application >> crashes with the following error: >> "vpp/src/svm/svm_fifo.c:410 (svm_fifo_init_ooo_lookup) assertion >> `!rb_tree_is_init (&f->ooo_deq_lookup)' fails" >> >> What is causing this error? >> >> Thanks again, >> Sebastiano >> >> [1] https://gist.github.com/sebymiano/8bc582bc6491cc88f5a608d4a83b25e9 >> <https://gist.github.com/sebymiano/8bc582bc6491cc88f5a608d4a83b25e9> >> Il giorno mar 21 lug 2020 alle ore 19:22 Florin Coras >> <fcoras.li...@gmail.com <mailto:fcoras.li...@gmail.com>> ha scritto: >> Hi Sebastiano, >> >> The test proxy application is just an example, so it’s far from optimized. >> Nonetheless, last time I tested it was capable of saturating a 10Gbps nic. >> So some things to consider while debugging: >> - fifo size configuration. The wiki page does not set a fifo size and as a >> result a small default is used. Try adding “fifo size 4096” to the “test >> proxy” cli to force fifos of 4MB. >> - check error counters with “show error” to see if tcp or the interfaces >> exhibit other errors. >> - see if vpp is actually loaded with “show run” (do a clear run to check >> only recent data). >> >> Regards, >> Florin >> >>> On Jul 21, 2020, at 8:44 AM, Sebastiano Miano <mianosebasti...@gmail.com >>> <mailto:mianosebasti...@gmail.com>> wrote: >>> >>> Dear all, >>> I was trying to test the performance of the VPP Host Stack, compared to the >>> one of the Linux kernel TCP/IP stack. >>> In particular, I was testing the TestProxy application [1] and compare it >>> with the simpleproxy application available at this URL [2]. >>> >>> My setup is composed of a server1, which runs the VPP test proxy >>> application attached to two physical interfaces (dual-port Intel XL710 >>> 40GbE NIC). The application listens to TCP traffic on a given IP1:port1 >>> (interface 1) and forwards it to a "backend" server listening on another >>> IP2:port2 (interface 2). >>> Another server2 (same NIC) is running both an iperf3 client, which sends >>> traffic to the proxy at IP1:port1 and an iperf3 server, which receives >>> traffic on IP2:port2. Both iperf3 client and servers are running in two >>> different netns on server2 [3]. >>> The VPP startup configuration that I used is the following [4]. >>> >>> The configuration works fine, however, these are the results that I got: >>> VPP Test Proxy (VPP) - 1.50 Gbits/sec >>> Simpleproxy (Linux kernel) - 9.39 Gbits/sec >>> >>> I am wondering if there is something wrong with my setup/configuration, I >>> am quite new to VPP. >>> >>> Thank you in advance. >>> Sebastiano >>> >>> [1] https://wiki.fd.io/view/VPP/HostStack/TestProxy >>> <https://wiki.fd.io/view/VPP/HostStack/TestProxy> >>> [2] https://github.com/vzaliva/simpleproxy >>> <https://github.com/vzaliva/simpleproxy> >>> [3] https://gist.github.com/sebymiano/0ff74ed0ec2805591fca7cd688b805d9 >>> <https://gist.github.com/sebymiano/0ff74ed0ec2805591fca7cd688b805d9> >>> [4] https://gist.github.com/sebymiano/f75c0f4d506fbf722cb2358b1deaa250 >>> <https://gist.github.com/sebymiano/f75c0f4d506fbf722cb2358b1deaa250> >>> >> >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#17046): https://lists.fd.io/g/vpp-dev/message/17046 Mute This Topic: https://lists.fd.io/mt/75706142/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
