DPDK bonding is no longer supported in 19.08. However, you can use VPP native
bonding to accomplish the same thing.
create bond mode active-backup load-balance l34
set interface state BondEthernet0 up
bond add BondEthernet0 GigabitEthernet1/0/0
bond add BondEthernet0 GigabitEthernet1/0/1
Steven
From: <vpp-dev@lists.fd.io> on behalf of "wei_sky2...@163.com"
<wei_sky2...@163.com>
Date: Thursday, January 2, 2020 at 10:14 PM
To: "vpp-dev@lists.fd.io" <vpp-dev@lists.fd.io>
Subject: [vpp-dev] #vpp #bond How to config bond mode in vpp?
[Edited Message Follows]
we use vpp version 19.08
I config bond in VPP startup.conf
dpdk{
.......
vdev eth_bond0,mode=1,slave=0000:01:00.0,slave=0000:01:00.1，xmit_policy=l34
......
}
But when vpp start,I show int
DBGvpp# show int
Name Idx State MTU (L3/IP4/IP6/MPLS)
Counter Count
GigabitEthernet1/0/0 1 down 9000/0/0/0
GigabitEthernet1/0/1 2 down 9000/0/0/0
UnknownEthernet2 3 down 9000/0/0/0
local0 0 down 0/0/0/0
when I Set state UnknownEthernet2 up, vpp crash down.
Another question, when I compile VPP, Is need cfg
RTE_LIBRTE_PMD_BOND(build/external/packages/dpdk.mk) option on?
Thanks!
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15038): https://lists.fd.io/g/vpp-dev/message/15038
Mute This Topic: https://lists.fd.io/mt/69394532/21656
Mute #vpp: https://lists.fd.io/mk?hashtag=vpp&subid=1480452
Mute #bond: https://lists.fd.io/mk?hashtag=bond&subid=1480452
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
