we use vpp version 19.08
when I config Bond in VPP startup.conf
dpdk{
.......
vdev eth_bond0,mode=1,slave=0000:01:00.0,slave=0000:01:00.1，xmit_policy=l34
......
}
But when vpp start,I show int
DBGvpp# show int
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter
Count
GigabitEthernet1/0/0 1 down 9000/0/0/0
GigabitEthernet1/0/1 2 down 9000/0/0/0
UnknownEthernet2 3 down 9000/0/0/0
local0 0 down 0/0/0/0
when I Set status UnknownEthernet2 up, vpp crash down.
Another question, when I compile VPP, Is need cfg RTE_LIBRTE_PMD_BOND
(build/external/packages/dpdk.mk) option on?
Thanks!
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15026): https://lists.fd.io/g/vpp-dev/message/15026
Mute This Topic: https://lists.fd.io/mt/69394532/21656
Mute #vpp: https://lists.fd.io/mk?hashtag=vpp&subid=1480452
Mute #bond: https://lists.fd.io/mk?hashtag=bond&subid=1480452
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
