Dear Matue, Ole OK, Is there any example to write address and port allocation function? Do you have any plan to implement 'multiple outside interface' and 'support ACL before NAT'?
Regards, Khers On Mon, Jan 7, 2019 at 8:53 AM Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco) <matfa...@cisco.com> wrote: > Hi, > > > > Your requirement is not supported currently. Maybe you can implement it > using NAT as output feature and write your own address and port allocation > function. > > > > Matus > > > > > > *From:* khers <s3m2e1.6s...@gmail.com> > *Sent:* Sunday, January 6, 2019 3:35 PM > *To:* Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco) < > matfa...@cisco.com> > *Cc:* vpp-dev <vpp-dev@lists.fd.io> > *Subject:* Re: [vpp-dev] nat: specify a pool for an outgoing interface > > > > Dear Matus > > > > Unfortunately we can not assign two vrf to an interface. > > Is there another way to implement my requirement? > > > > Regards, > > Khers > > > > > > On Wed, Jan 2, 2019 at 9:56 AM Matus Fabian -X (matfabia - PANTHEON > TECHNOLOGIES at Cisco) <matfa...@cisco.com> wrote: > > Hi, > > > > You can translate to different addresses only packets from different VRF > https://wiki.fd.io/view/VPP/NAT#NAT44_add_pool_address_for_specific_tenant > > > > Matus > > > > > > *From:* vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> *On Behalf Of *emma sdi > *Sent:* Tuesday, January 1, 2019 9:10 AM > *To:* vpp-dev <vpp-dev@lists.fd.io> > *Subject:* [vpp-dev] nat: specify a pool for an outgoing interface > > > > Dear VPP > > > > I want to configure a simple nat topology with 3 interfaces: > > ===========in============ > ==============out================ > > > GigabitEthernet3/0/0 > GigabitEthernetb/0/0 > > > GigabitEthernet1b/0/0 > > I want to source nat all packets going out form GigabitEthernetb/0/0 to ip > address of GigabitEthernetb/0/0, and source nat all packets going out from > GigabitEthernet1b/0/0 to ip address of GigabitEthernet1b/0/0. > > Here is my configs <https://paste.ubuntu.com/p/cqD5rw88Ht/> > > The problem is with nat in which all packets are translated to same ip > address!! > > Is there any way to translate packets to different IP addresses if they > are transmitted through different interfaces. > > Here is output of show trace <https://paste.ubuntu.com/p/2zdHTBJSPb/> > > > > Regards, > > khers > > > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11854): https://lists.fd.io/g/vpp-dev/message/11854 Mute This Topic: https://lists.fd.io/mt/28903613/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
