Dear Matus Unfortunately we can not assign two vrf to an interface. Is there another way to implement my requirement?
Regards, Khers On Wed, Jan 2, 2019 at 9:56 AM Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco) <matfa...@cisco.com> wrote: > Hi, > > > > You can translate to different addresses only packets from different VRF > https://wiki.fd.io/view/VPP/NAT#NAT44_add_pool_address_for_specific_tenant > > > > Matus > > > > > > *From:* vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> *On Behalf Of *emma sdi > *Sent:* Tuesday, January 1, 2019 9:10 AM > *To:* vpp-dev <vpp-dev@lists.fd.io> > *Subject:* [vpp-dev] nat: specify a pool for an outgoing interface > > > > Dear VPP > > > > I want to configure a simple nat topology with 3 interfaces: > > ===========in============ > ==============out================ > > > GigabitEthernet3/0/0 > GigabitEthernetb/0/0 > > > GigabitEthernet1b/0/0 > > I want to source nat all packets going out form GigabitEthernetb/0/0 to ip > address of GigabitEthernetb/0/0, and source nat all packets going out from > GigabitEthernet1b/0/0 to ip address of GigabitEthernet1b/0/0. > > Here is my configs <https://paste.ubuntu.com/p/cqD5rw88Ht/> > > The problem is with nat in which all packets are translated to same ip > address!! > > Is there any way to translate packets to different IP addresses if they > are transmitted through different interfaces. > > Here is output of show trace <https://paste.ubuntu.com/p/2zdHTBJSPb/> > > > > Regards, > > khers > > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11845): https://lists.fd.io/g/vpp-dev/message/11845 Mute This Topic: https://lists.fd.io/mt/28903613/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
