Dave i set VPP_WITH_NEWPLUGIN=yes and now the build is passing ok but I do not see any build products of newplugin under build-root/build-vpp-native/vpp/plugins/ so probably i miss something which is not specified in sample_plugin_doc.md Thanks in advance -Sara
On Mon, Mar 5, 2018 at 11:07 AM, Sara Gittlin <sara.gitt...@gmail.com> wrote: > Thank you Dave > we are progressing > the root failure is the new sample plugin- the variable 'sample_main' > (type sample_main_t ) is not defined anywhere > ------------------- > load_one_plugin:142: /usr/lib/vpp_plugins/sample_plugin.so: undefined > symbol: sample_main > load_one_plugin:143: Failed to load plugin 'sample_plugin.so' > Aborted > ------------------------ > so i set it in sample.c and make build - but then i get build error > "checking how to run the C preprocessor... plugins/Makefile.am:78: > error: ENABLE_NEWPLUGIN does not appear in AM_CONDITIONAL" > do i have to set an env-var for this newplugin something like > VPP_WITH_NEWPLUGIN=yes ? > > Thanks in advance > -Sara > > On Sun, Mar 4, 2018 at 7:09 PM, Dave Barach <dbar...@cisco.com> wrote: >> Start vpp interactively: >> >> # /usr/bin/vpp unix interactive >> >> to see if it immediately complains and/or aborts >> >> If that's OK, copy /etc/vpp/startup.conf to e.g. /etc/vpp/startup.conf.tmp. >> Change "nodaemon" to "interactive" in the copy, and try this: >> >> # /usr/bin/vpp -c /etc/vpp/startup.conf.tmp >> >> These two experiments should give you lots more info. >> >> D. >> >> -----Original Message----- >> From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Sara Gittlin >> Sent: Sunday, March 4, 2018 11:32 AM >> To: vpp-dev@lists.fd.io >> Cc: vpp-dev@lists.fd.io >> Subject: Re: [vpp-dev] How to activate the sample plugins >> >> Thank you Dave >> i've created a newplugin >> (https://docs.fd.io/vpp/17.07/sample_plugin_doc.html) >> and i see the sample plugin .so files under /usr/lib/vpp_plugins, and >> /usr/lib/vpp_api_test_plugins but vpp start is failed because of >> clib_socket_init: connect (fd 3, >> '/run/vpp/cli.sock'): No such file or directory >> I'm using the default startup.conf which contain the line --- >> cli-listen /run/vpp/cli.sock --- >> >> service vpp status output is : >> >> ● vpp.service - vector packet processing engine >> Loaded: loaded (/lib/systemd/system/vpp.service; enabled; vendor >> preset: enabled) >> Active: failed (Result: signal) since Sun 2018-03-04 11:28:09 EST; 9s ago >> Process: 18858 ExecStopPost=/bin/rm -f /dev/shm/db /dev/shm/global_vm >> /dev/shm/vpe-api (code=exited, status=0/SUCCESS) >> Process: 18855 ExecStart=/usr/bin/vpp -c /etc/vpp/startup.conf >> (code=killed, signal=ABRT) >> Process: 18852 ExecStartPre=/sbin/modprobe uio_pci_generic (code=exited, >> status=0/SUCCESS) >> Process: 18850 ExecStartPre=/bin/rm -f /dev/shm/db /dev/shm/global_vm >> /dev/shm/vpe-api (code=exited, status=0/SUCCESS) Main PID: 18855 >> (code=killed, signal=ABRT) >> >> Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Failed with result 'signal'. >> Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Service hold-off time over, >> scheduling restart. >> Mar 04 11:28:09 amhost1 systemd[1]: Stopped vector packet processing engine. >> Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Start request repeated too >> quickly. >> Mar 04 11:28:09 amhost1 systemd[1]: Failed to start vector packet processing >> engine. >> Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Unit entered failed state. >> Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Failed with result 'signal'. >> >> Thank in advance >> -Sara >> >> On Wed, Feb 28, 2018 at 2:12 PM, Dave Barach <dbar...@cisco.com> wrote: >>> Vpp and vpp_api_test look in specific directories for plugins: >>> /usr/lib/vpp_plugins, and /usr/lib/vpp_api_test_plugins respectively. You >>> can set these paths from the command line. >>> >>> If your plugin .so files aren't in the right place(s), they won't be loaded. >>> >>> HTH... D. >>> >>> -----Original Message----- >>> From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of >>> Sara Gittlin >>> Sent: Wednesday, February 28, 2018 3:46 AM >>> To: vpp-dev@lists.fd.io >>> Subject: Re: [vpp-dev] How to activate the sample plugins >>> >>> I've build the sample plugin as per guide page >>> https://docs.fd.io/vpp/17.07/sample_plugin_doc.html . >>> when i run it I can see than many plugins are loaded but not this specific >>> sample plugin (see log below) this guide page applies for vpp >>> v17.07-30-g839fa73. >>> my vpp is v18.04-rc0~287-gf9a968e2 >>> >>> Can anyone tell me whether to downgrade to vpp v17.07-30 ? other ? >>> >>> -------------------------log----------------------------------- >>> load_one_plugin:184: Loaded plugin: acl_plugin.so (Access Control >>> Lists) >>> load_one_plugin:184: Loaded plugin: dpdk_plugin.so (Data Plane >>> Development Kit (DPDK)) >>> load_one_plugin:184: Loaded plugin: flowprobe_plugin.so (Flow per >>> Packet) >>> load_one_plugin:184: Loaded plugin: gbp_plugin.so (Group Based Policy) >>> load_one_plugin:184: Loaded plugin: gtpu_plugin.so (GTPv1-U) >>> load_one_plugin:184: Loaded plugin: ila_plugin.so (Identifier-locator >>> addressing for IPv6) >>> load_one_plugin:184: Loaded plugin: ioam_plugin.so (Inbound OAM) >>> load_one_plugin:114: Plugin disabled (default): ixge_plugin.so >>> load_one_plugin:184: Loaded plugin: kubeproxy_plugin.so (kube-proxy >>> data plane) >>> load_one_plugin:184: Loaded plugin: l2e_plugin.so (L2 Emulation) >>> load_one_plugin:184: Loaded plugin: lb_plugin.so (Load Balancer) >>> load_one_plugin:184: Loaded plugin: libsixrd_plugin.so (IPv6 Rapid >>> Deployment on IPv4 Infrastructure (RFC5969)) >>> load_one_plugin:184: Loaded plugin: memif_plugin.so (Packet Memory >>> Interface (experimetal)) >>> load_one_plugin:184: Loaded plugin: nat_plugin.so (Network Address >>> Translation) >>> load_one_plugin:184: Loaded plugin: pppoe_plugin.so (PPPoE) >>> load_one_plugin:184: Loaded plugin: srv6ad_plugin.so (Dynamic SRv6 >>> proxy) >>> load_one_plugin:184: Loaded plugin: srv6am_plugin.so (Masquerading >>> SRv6 proxy) >>> load_one_plugin:184: Loaded plugin: srv6as_plugin.so (Static SRv6 >>> proxy) >>> load_one_plugin:184: Loaded plugin: stn_plugin.so (VPP Steals the NIC >>> for Container integration) >>> vnet_feature_arc_init:205: feature node 'acl-plugin-out-ip6-fa' not >>> found >>> vnet_feature_arc_init:205: feature node 'acl-plugin-out-ip4-fa' not >>> found >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/ioam_trace_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/stn_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/ioam_vxlan_gpe_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/memif_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/kubeproxy_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/acl_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/dpdk_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/lb_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/ioam_export_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/ioam_pot_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/vxlan_gpe_ioam_export_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/gtpu_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/pppoe_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/nat_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/flowprobe_test_plugin.so >>> load_one_plugin:63: Loaded plugin: >>> /usr/lib/vpp_api_test_plugins/udp_ping_test_plugin.so >>> >>> Thanks in advance >>> - Sara >>> >>> On Wed, Feb 28, 2018 at 7:57 AM, Sara Gittlin <sara.gitt...@gmail.com> >>> wrote: >>>> Hello All, >>>> Resending this -my last mail was broken by other issues I'm a vpp >>>> newbei. >>>> I want to activate some existing plugins - i see that many of them >>>> are loaded (e.g, acl, flowprob ) but I cannot activate them. >>>> another question is - I understand that i can customize the code of >>>> these plugins examples - correct ? >>>> >>>> Thank you in advance >>>> - Sara >>> >>> >>> >>> >>> >>> >> >> >> >> >> >> > > > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8404): https://lists.fd.io/g/vpp-dev/message/8404 View All Messages In Topic (7): https://lists.fd.io/g/vpp-dev/topic/13267098 Mute This Topic: https://lists.fd.io/mt/13267098/21656 New Topic: https://lists.fd.io/g/vpp-dev/post Change Your Subscription: https://lists.fd.io/g/vpp-dev/editsub/21656 Group Home: https://lists.fd.io/g/vpp-dev Contact Group Owner: vpp-dev+ow...@lists.fd.io Terms of Service: https://lists.fd.io/static/tos Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub -=-=-=-=-=-=-=-=-=-=-=-
