Thank you Dave i've created a newplugin (https://docs.fd.io/vpp/17.07/sample_plugin_doc.html) and i see the sample plugin .so files under /usr/lib/vpp_plugins, and /usr/lib/vpp_api_test_plugins but vpp start is failed because of clib_socket_init: connect (fd 3, '/run/vpp/cli.sock'): No such file or directory I'm using the default startup.conf which contain the line --- cli-listen /run/vpp/cli.sock ---
service vpp status output is : ● vpp.service - vector packet processing engine Loaded: loaded (/lib/systemd/system/vpp.service; enabled; vendor preset: enabled) Active: failed (Result: signal) since Sun 2018-03-04 11:28:09 EST; 9s ago Process: 18858 ExecStopPost=/bin/rm -f /dev/shm/db /dev/shm/global_vm /dev/shm/vpe-api (code=exited, status=0/SUCCESS) Process: 18855 ExecStart=/usr/bin/vpp -c /etc/vpp/startup.conf (code=killed, signal=ABRT) Process: 18852 ExecStartPre=/sbin/modprobe uio_pci_generic (code=exited, status=0/SUCCESS) Process: 18850 ExecStartPre=/bin/rm -f /dev/shm/db /dev/shm/global_vm /dev/shm/vpe-api (code=exited, status=0/SUCCESS) Main PID: 18855 (code=killed, signal=ABRT) Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Failed with result 'signal'. Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Service hold-off time over, scheduling restart. Mar 04 11:28:09 amhost1 systemd[1]: Stopped vector packet processing engine. Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Start request repeated too quickly. Mar 04 11:28:09 amhost1 systemd[1]: Failed to start vector packet processing engine. Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Unit entered failed state. Mar 04 11:28:09 amhost1 systemd[1]: vpp.service: Failed with result 'signal'. Thank in advance -Sara On Wed, Feb 28, 2018 at 2:12 PM, Dave Barach <dbar...@cisco.com> wrote: > Vpp and vpp_api_test look in specific directories for plugins: > /usr/lib/vpp_plugins, and /usr/lib/vpp_api_test_plugins respectively. You can > set these paths from the command line. > > If your plugin .so files aren't in the right place(s), they won't be loaded. > > HTH... D. > > -----Original Message----- > From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Sara > Gittlin > Sent: Wednesday, February 28, 2018 3:46 AM > To: vpp-dev@lists.fd.io > Subject: Re: [vpp-dev] How to activate the sample plugins > > I've build the sample plugin as per guide page > https://docs.fd.io/vpp/17.07/sample_plugin_doc.html . > when i run it I can see than many plugins are loaded but not this specific > sample plugin (see log below) this guide page applies for vpp > v17.07-30-g839fa73. > my vpp is v18.04-rc0~287-gf9a968e2 > > Can anyone tell me whether to downgrade to vpp v17.07-30 ? other ? > > -------------------------log----------------------------------- > load_one_plugin:184: Loaded plugin: acl_plugin.so (Access Control Lists) > load_one_plugin:184: Loaded plugin: dpdk_plugin.so (Data Plane Development > Kit (DPDK)) > load_one_plugin:184: Loaded plugin: flowprobe_plugin.so (Flow per Packet) > load_one_plugin:184: Loaded plugin: gbp_plugin.so (Group Based Policy) > load_one_plugin:184: Loaded plugin: gtpu_plugin.so (GTPv1-U) > load_one_plugin:184: Loaded plugin: ila_plugin.so (Identifier-locator > addressing for IPv6) > load_one_plugin:184: Loaded plugin: ioam_plugin.so (Inbound OAM) > load_one_plugin:114: Plugin disabled (default): ixge_plugin.so > load_one_plugin:184: Loaded plugin: kubeproxy_plugin.so (kube-proxy data > plane) > load_one_plugin:184: Loaded plugin: l2e_plugin.so (L2 Emulation) > load_one_plugin:184: Loaded plugin: lb_plugin.so (Load Balancer) > load_one_plugin:184: Loaded plugin: libsixrd_plugin.so (IPv6 Rapid Deployment > on IPv4 Infrastructure (RFC5969)) > load_one_plugin:184: Loaded plugin: memif_plugin.so (Packet Memory Interface > (experimetal)) > load_one_plugin:184: Loaded plugin: nat_plugin.so (Network Address > Translation) > load_one_plugin:184: Loaded plugin: pppoe_plugin.so (PPPoE) > load_one_plugin:184: Loaded plugin: srv6ad_plugin.so (Dynamic SRv6 proxy) > load_one_plugin:184: Loaded plugin: srv6am_plugin.so (Masquerading SRv6 proxy) > load_one_plugin:184: Loaded plugin: srv6as_plugin.so (Static SRv6 proxy) > load_one_plugin:184: Loaded plugin: stn_plugin.so (VPP Steals the NIC for > Container integration) > vnet_feature_arc_init:205: feature node 'acl-plugin-out-ip6-fa' not found > vnet_feature_arc_init:205: feature node 'acl-plugin-out-ip4-fa' not found > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/ioam_trace_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/stn_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/ioam_vxlan_gpe_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/memif_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/kubeproxy_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/acl_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/dpdk_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/lb_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/ioam_export_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/ioam_pot_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/vxlan_gpe_ioam_export_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/gtpu_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/pppoe_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/nat_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/flowprobe_test_plugin.so > load_one_plugin:63: Loaded plugin: > /usr/lib/vpp_api_test_plugins/udp_ping_test_plugin.so > > Thanks in advance > - Sara > > On Wed, Feb 28, 2018 at 7:57 AM, Sara Gittlin <sara.gitt...@gmail.com> wrote: >> Hello All, >> Resending this -my last mail was broken by other issues I'm a vpp >> newbei. >> I want to activate some existing plugins - i see that many of them are >> loaded (e.g, acl, flowprob ) but I cannot activate them. >> another question is - I understand that i can customize the code of >> these plugins examples - correct ? >> >> Thank you in advance >> - Sara > > > > > > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8399): https://lists.fd.io/g/vpp-dev/message/8399 View All Messages In Topic (4): https://lists.fd.io/g/vpp-dev/topic/13267098 Mute This Topic: https://lists.fd.io/mt/13267098/21656 New Topic: https://lists.fd.io/g/vpp-dev/post Change Your Subscription: https://lists.fd.io/g/vpp-dev/editsub/21656 Group Home: https://lists.fd.io/g/vpp-dev Contact Group Owner: vpp-dev+ow...@lists.fd.io Terms of Service: https://lists.fd.io/static/tos Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub -=-=-=-=-=-=-=-=-=-=-=-
