You bring up an interesting point Robin. Does anyone know of the exact location of the Tout test point? I am wondering whether this is measuring the temperature of a metallic path to the device or just the water outlet. My suspicion is that the water is being ejected from the cooling tube by pulses of gas that develop at very hot points somewhat like vapor locks. This is because I find it difficult to believe that there is any way the pressure associated with the 150 C or so temperatures shown could exist in this setup.
This brings back memories of the ideal location that Rossi chose to position his thermocouple in one of his demonstrations where we could not be confident that the water was at the reading temperature. Regardless of the exact measurements, the fact that they used an inactive control demonstrated that their device definitely puts out plenty of excess heat. The exact COP is unknown to me, but it was over unity and it will be interesting to hear what the skeptics have to say about this test. One day most of them will find a rock cover and slowly wiggle out of sight. Defkalion, well done guys! Next time try to allow independent scientists the opportunity to make the tests to improve credibility to the general viewers. Also, I hope that you demonstrate a better method of control which does not require a PhD in controlology to keep the device running at the desired output level! Dave -----Original Message----- From: mixent <[email protected]> To: vortex-l <[email protected]> Sent: Wed, Jul 24, 2013 12:23 am Subject: Re: [Vo]:Defkalion Green Technologies - English Demo In reply to Craig's message of Tue, 23 Jul 2013 14:06:28 -0400: Hi, [snip] >Looks like ignition! > >http://new.livestream.com/triwu2/Defkalion-US > >Craig I wonder why T_out is coloured, while all the other numbers are black? Is this possibly indicative of an error condition? (If so then the output energy calculation is not reliable.) Regards, Robin van Spaandonk http://rvanspaa.freehostia.com/project.html
