Keep in mind that this is a demonstration, and not an experiment. There will certainly be several things that will come up which will eventually need to be addressed, as has happened in every demonstration. But if this group is getting the same results as Rossi, with the same methodology, then that's the best sign of all that the results are what they appear to be.
Craig On 07/23/2013 01:10 PM, Charles Francis wrote: > > Test is looking professional so far and promising. One concern for me > though is that after all that careful flow calibration, they switched > the water flow from bucket to sink – thereby changing the system under > test. For example, by restricting water flow using a hidden control > valve, they might cause the system to run much hotter even though the > pump is doing the same work and could therefore report a much greater > flow than is actually the case. Obviously, the wires need to be cut at > the end of the test to check for sub-wires (or coax) that could > deceive the clamp on meters. There is a labyrinth of redundant wires > that should be disconnected if possible. Not happy about the > interruption of the video stream, hope the observers check for > tampering during this time. > > Charles >
