On Sun, Feb 26, 2023 at 12:06:36AM +0200, Parav Pandit wrote:
> Currently PCI device requirements section contains mix of normative
> statements for for regular (non transitional) device and
> transitional device under one section.
>
> Some requirements of the transitional device are also located in
> legacy interface section which is the right section for it.
>
> Hence,
> 1. Move transitional device requirements to their designated Legacy
> interface section
> 2. Describe regular device requirements without quoting it as "non
> transitional device"
>
> While at it, write the description using a singular object definition.
>
> This is only an editorial change.
>
> This patch is on top of [1].
>
> [1] https://lists.oasis-open.org/archives/virtio-dev/202302/msg00578.html
>
> Signed-off-by: Parav Pandit <[email protected]>
nack I already answered this. legacy sections describe
legacy interface of transitional devices.
> ---
> changelog:
> v0->v1:
> - rebased to lowercase device id notation
> - added missing '.'
> ---
> transport-pci.tex | 74 ++++++++++++++++++++++++-----------------------
> 1 file changed, 38 insertions(+), 36 deletions(-)
>
> diff --git a/transport-pci.tex b/transport-pci.tex
> index 9f9f076..5d22e6f 100644
> --- a/transport-pci.tex
> +++ b/transport-pci.tex
> @@ -24,50 +24,28 @@ \subsection{PCI Device Discovery}\label{sec:Virtio
> Transport Options / Virtio Ov
> The PCI Device ID is calculated by adding 0x1040 to the Virtio Device ID,
> as indicated in section \ref{sec:Device Types}.
> Additionally, devices MAY utilize a Transitional PCI Device ID range,
> -0x1000 to 0x103F depending on the device type.
> +0x1000 to 0x103f depending on the device type.
>
> \devicenormative{\subsubsection}{PCI Device Discovery}{Virtio Transport
> Options / Virtio Over PCI Bus / PCI Device Discovery}
>
> -Devices MUST have the PCI Vendor ID 0x1af4.
> -Devices MUST either have the PCI Device ID calculated by adding 0x1040
> +The device MUST have the PCI Vendor ID 0x1af4.
> +The device MUST calculate PCI Device ID by adding 0x1040
> to the Virtio Device ID, as indicated in section \ref{sec:Device
> -Types} or have the Transitional PCI Device ID depending on the device type,
> -as follows:
> -
> -\begin{tabular}{|l|c|}
> -\hline
> -Transitional PCI Device ID & Virtio Device \\
> -\hline \hline
> -0x1000 & network device \\
> -\hline
> -0x1001 & block device \\
> -\hline
> -0x1002 & memory ballooning (traditional) \\
> -\hline
> -0x1003 & console \\
> -\hline
> -0x1004 & SCSI host \\
> -\hline
> -0x1005 & entropy source \\
> -\hline
> -0x1009 & 9P transport \\
> -\hline
> -\end{tabular}
> +Types}.
>
> For example, the network device with the Virtio Device ID 1
> -has the PCI Device ID 0x1041 or the Transitional PCI Device ID 0x1000.
> -
> -The PCI Subsystem Vendor ID and the PCI Subsystem Device ID MAY reflect
> -the PCI Vendor and Device ID of the environment (for informational purposes
> by the driver).
> +has the PCI Device ID 0x1041.
>
> -Non-transitional devices SHOULD have a PCI Device ID in the range
> -0x1040 to 0x107f.
> -Non-transitional devices SHOULD have a PCI Revision ID of 1 or higher.
> -Non-transitional devices SHOULD have a PCI Subsystem Device ID of 0x40 or
> higher.
> +The device SHOULD have a PCI Device ID in the range 0x1040 to 0x107f.
> +The device SHOULD have a PCI Revision ID of 1 or higher.
> +The device SHOULD have a PCI Subsystem Device ID of 0x40 or higher.
>
> This is to reduce the chance of a legacy driver attempting
> to drive the device.
>
> +The PCI Subsystem Vendor ID and the PCI Subsystem Device ID MAY reflect
> +the PCI Vendor and Device ID of the environment (for informational purposes
> by the driver).
> +
> \drivernormative{\subsubsection}{PCI Device Discovery}{Virtio Transport
> Options / Virtio Over PCI Bus / PCI Device Discovery}
> Drivers MUST match devices with the PCI Vendor ID 0x1af4 and
> the PCI Device ID in the range 0x1040 to 0x107f,
> @@ -85,11 +63,35 @@ \subsection{PCI Device Discovery}\label{sec:Virtio
> Transport Options / Virtio Ov
> PCI Subsystem Device ID value.
>
> \subsubsection{Legacy Interfaces: A Note on PCI Device
> Discovery}\label{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI
> Device Discovery / Legacy Interfaces: A Note on PCI Device Discovery}
> -Transitional devices MUST have a PCI Revision ID of 0.
> -Transitional devices MUST have the PCI Subsystem Device ID
> +
> +The transitional device has one of the following PCI Device ID
> +depending on the device type:
> +
> +\begin{tabular}{|l|c|}
> +\hline
> +Transitional PCI Device ID & Virtio Device \\
> +\hline \hline
> +0x1000 & network device \\
> +\hline
> +0x1001 & block device \\
> +\hline
> +0x1002 & memory ballooning (traditional) \\
> +\hline
> +0x1003 & console \\
> +\hline
> +0x1004 & SCSI host \\
> +\hline
> +0x1005 & entropy source \\
> +\hline
> +0x1009 & 9P transport \\
> +\hline
> +\end{tabular}
> +
> +The transitional device MUST have a PCI Revision ID of 0.
> +The transitional device MUST have the PCI Subsystem Device ID
> matching the Virtio Device ID, as indicated in section \ref{sec:Device
> Types}.
> Transitional devices MUST have the Transitional PCI Device ID in
> -the range 0x1000 to 0x103F.
> +the range 0x1000 to 0x103f.
>
> This is to match legacy drivers.
>
> --
> 2.26.2
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
