Use uniformly lowercase alphabets to write PCI vendor id and device id.
Signed-off-by: Parav Pandit <[email protected]>
---
changelog:
v0->v1:
- use all lowercase letters to define device and vedor id
---
transport-pci.tex | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/transport-pci.tex b/transport-pci.tex
index 0642107..9f9f076 100644
--- a/transport-pci.tex
+++ b/transport-pci.tex
@@ -18,8 +18,8 @@ \section{Virtio Over PCI Bus}\label{sec:Virtio Transport
Options / Virtio Over P
\subsection{PCI Device Discovery}\label{sec:Virtio Transport Options / Virtio
Over PCI Bus / PCI Device Discovery}
-Any PCI device with PCI Vendor ID 0x1AF4, and PCI Device ID 0x1000 through
-0x107F inclusive is a virtio device. The actual value within this range
+Any PCI device with PCI Vendor ID 0x1af4, and PCI Device ID 0x1000 through
+0x107f inclusive is a virtio device. The actual value within this range
indicates which virtio device is supported by the device.
The PCI Device ID is calculated by adding 0x1040 to the Virtio Device ID,
as indicated in section \ref{sec:Device Types}.
@@ -28,7 +28,7 @@ \subsection{PCI Device Discovery}\label{sec:Virtio Transport
Options / Virtio Ov
\devicenormative{\subsubsection}{PCI Device Discovery}{Virtio Transport
Options / Virtio Over PCI Bus / PCI Device Discovery}
-Devices MUST have the PCI Vendor ID 0x1AF4.
+Devices MUST have the PCI Vendor ID 0x1af4.
Devices MUST either have the PCI Device ID calculated by adding 0x1040
to the Virtio Device ID, as indicated in section \ref{sec:Device
Types} or have the Transitional PCI Device ID depending on the device type,
@@ -69,13 +69,13 @@ \subsection{PCI Device Discovery}\label{sec:Virtio
Transport Options / Virtio Ov
to drive the device.
\drivernormative{\subsubsection}{PCI Device Discovery}{Virtio Transport
Options / Virtio Over PCI Bus / PCI Device Discovery}
-Drivers MUST match devices with the PCI Vendor ID 0x1AF4 and
+Drivers MUST match devices with the PCI Vendor ID 0x1af4 and
the PCI Device ID in the range 0x1040 to 0x107f,
calculated by adding 0x1040 to the Virtio Device ID,
as indicated in section \ref{sec:Device Types}.
Drivers for device types listed in section \ref{sec:Virtio
Transport Options / Virtio Over PCI Bus / PCI Device Discovery}
-MUST match devices with the PCI Vendor ID 0x1AF4 and
+MUST match devices with the PCI Vendor ID 0x1af4 and
the Transitional PCI Device ID indicated in section
\ref{sec:Virtio
Transport Options / Virtio Over PCI Bus / PCI Device Discovery}.
@@ -89,7 +89,7 @@ \subsubsection{Legacy Interfaces: A Note on PCI Device
Discovery}\label{sec:Virt
Transitional devices MUST have the PCI Subsystem Device ID
matching the Virtio Device ID, as indicated in section \ref{sec:Device Types}.
Transitional devices MUST have the Transitional PCI Device ID in
-the range 0x1000 to 0x103f.
+the range 0x1000 to 0x103F.
This is to match legacy drivers.
@@ -688,7 +688,7 @@ \subsubsection{Vendor data capability}\label{sec:Virtio
Devices CAN present multiple Vendor data capabilities with
either different or identical \field{vendor_id} values.
-The value \field{vendor_id} MUST NOT equal 0x1AF4.
+The value \field{vendor_id} MUST NOT equal 0x1af4.
The size of the Vendor data capability MUST be a multiple of 4 bytes.
--
2.26.2
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
